Duplicator MTS-SAS, which pursues data erasure operations for SAS, HDD, and SSD.

No license fee required, no internet connection needed, can be used with the mount attached, capable of high-speed erasure at 18GB per minute while leaving a deletion log, HDD and SSD erasure device.

Our company has planned and developed the groundbreaking data erasure device MTS-SAS for SAS, SSD, and SATA. 1. Over 18GB per minute ultra-fast data erasure, 2. Supports SAS, SSD, and HDD, 3. All ports are independent and asynchronous, allowing for efficient work as drives with faster speeds or smaller capacities can be swapped out once they finish, 4. Ability to terminate operations on defective drives midway, 5. No need to remove the mount, 6. Erasure modes: Quick Erase, Full Erase, DoD Erase, DoD Erase with Compare, Seven Pass Erase, Secure Erase, NSA Erase, 7. Log saving capability, 8. PC link function, 9. A wide range of optional adapters to support various interfaces.

• others
• Firewall

A data erasure device for HDD, SSD, and SAS that can erase at a rate of 18GB per minute while keeping the mount attached, with no license fees and no internet connection required.

SAS, SSD, SAS data erasure device Jet Eraser 8-port model HDE-GT series HDE-GT800. 1. Over 30GB per minute ultra-fast data erasure, 2. Data erasure for SAS, SSD, and HDD, 3. All ports are independent and asynchronous, allowing for efficient work as drives with faster speeds or smaller capacities can be swapped out when finished, 4. Ability to terminate operations on faulty drives midway, 5. No need to remove the mount, 6. Erasure modes: Quick Erase, Full Erase, DoD Erase, DoD Erase with Compare, Seven Pass Erase, Secure Erase, NSA Erase, 7. Log saving capability, 8. PC link function, 9. A wide range of optional adapters to support various interfaces.

• others
• Security Assessment
• Firewall

No license fee required, no internet connection needed, can be used with the mount attached, and can leave a deletion log; 18GB per minute HDD, SSD, and SAS data erasure device.

SAS, SSD, SAS data erasure device Jet Eraser HDE-GT400 4-port model. 1. Over 30GB per minute ultra-fast data erasure, 2. Data erasure for SAS, SSD, and HDD, 3. All ports are independent and asynchronous, allowing for efficient operation as the next drive can be swapped in when a faster HDD or a smaller capacity HDD finishes first, 4. Ability to terminate the operation of faulty drives midway, 5. No need to remove the mount, 6. Erasure modes: Quick Erase, Full Erase, DoD Erase, DoD Erase with Compare, Seven Pass Erase, Secure Erase, NSA Erase, 7. Log saving capability, 8. PC link function, 9. A wide range of adapter options to support various interfaces.

• Other security systems
• others
• Firewall

USB duplicator equipped with a CD-ROM function that prevents data tampering, deletion, and formatting using a dedicated USB, allowing for data protection.

The U-Reach C series USB duplicator offers optimal models ranging from 1:9 to 1:119 based on the number of slots. It can write at a speed of 2.0GB per minute. CD-ROM creation involves write protection to prevent data tampering, deletion, and formatting, resulting in Read-Only Memory (ROM). When this memory is inserted into a PC, it is recognized as a CD-ROM rather than a USB memory, allowing for automatic autorun. It is ideal for movies, music, and content. Traditionally, USB data lacked protection, making it prone to easy deletion, tampering, and formatting, which caused issues for distribution. A dedicated USB memory is required. Furthermore, with this duplicator, it is possible to erase CD-ROM created content and write new data multiple times. Overall, it allows for the selection of protection for each partition.

• others
• Security Assessment
• Firewall

An electric device that physically destroys HDDs with 12 tons of hydraulic power and 4 destruction bits. By swapping the destruction tool, it is also possible to destroy SSDs and magnetic tapes.

1. Simple operation that allows physical destruction by simply inserting the recording medium into the main unit and pressing the start button. 2. Destruction power of up to 12 tons. 3. Utilizes hydraulic power, enabling high-power destruction of HDDs. 4. With just one main unit, various destruction tools can be exchanged to enable physical destruction of SSDs and magnetic tapes (world's first). 5. Creates four holes in the HDD during a single destruction process, destroying the recording surface platter. 6. Even if the destruction bit (pin) is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the destruction shaft from becoming dislodged after destruction. 8. Capable of battery operation in locations without power, enabling on-site destruction work (world's first).

• Security Assessment
• Firewall

With 12 tons of hydraulic power, it can physically destroy HDDs and SSDs, and even if the cutting bits are damaged or worn, they can be easily replaced. It is also capable of destroying magnetic tapes.

1. Simple operation by just inserting the recording medium into the main unit and pressing the start button. 2. Destructive power of up to 12 tons. 3. Uses hydraulic power, enabling the destruction of HDDs and SSDs with high power. 4. With just one main unit, various destruction tools can be exchanged to physically destroy HDDs, SSDs, and magnetic tapes (world's first). 5. SSDs are bent to physically destroy the internal semiconductor IC chips. 6. Even if the destruction bit at the tip is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Can be battery-operated in locations without power, enabling on-site destruction work (world's first).

• Other security systems
• Security Assessment
• Firewall

An electric physical destruction device that cuts LTO and other magnetic tapes with 12 tons of hydraulic power and cutting blades. By replacing the destruction tool, it is also possible to destroy HDDs and SSDs.

1. Simple operation by just inserting the recording medium into the main unit and pressing the start button. 2. Destructive power of up to 12 tons. 3. Uses hydraulic power, enabling high-power magnetic tape cutting. 4. By exchanging various destruction tools on a single main unit, physical destruction of HDDs and SSDs is also possible (world's first). 5. Even if the cutting and destruction blade is damaged or worn, it can be easily replaced, allowing for continuous work with peace of mind at any time. 6. Battery operation is possible even in places without power, enabling on-site destruction work (world's first).

• Security Assessment
• Firewall

An electric destruction device capable of physically destroying HDDs and SSDs with 12 tons of hydraulic power. By simply changing the tool, it can also destroy magnetic tapes with one machine.

1. Simple operation that allows for physical destruction by just inserting the recording medium into the main unit and pressing the start button. 2. Destructive power of up to 12 tons. 3. Uses hydraulic power, enabling high-power destruction of HDDs and SSDs. 4. Creates four holes in an HDD and bends an SSD for physical destruction in a single operation. 5. With just a tool exchange on the main unit, physical destruction of magnetic tapes is also possible (world's first). 6. Even if the destruction bit at the tip is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the HDD destruction shaft from becoming stuck after destruction. 8. Battery operation is possible even in locations without power, enabling onsite destruction work (world's first).

• Other security systems
• others
• Security Assessment

SSD Shredder Flash EX completely prevents information leakage by crushing SSDs and smartphone IC chips into extremely small pieces.

The SSDs equipped with a large amount of flash memory and smartphones require physical destruction of the IC chip to completely erase data, but it is possible to completely prevent information leakage by shredding them. Flash EX is a highly reliable compact SSD shredder that meets very strict standards worldwide. The items to be shredded include SSDs, smartphones, USB memory, SD cards, CDs/DVDs, and credit cards, with shredding resulting in particles as small as 4 x 15 mm. The shredder has a control panel on the top, making it easy to use. Additionally, there is a window in the media feed slot that allows users to check the shredding status, providing peace of mind. In data centers, there is a shift to high-speed, long-lasting, and energy-efficient SSDs for server storage, and shredding is always required when replacing these SSDs, making this shredder essential. Support for Windows 10 will end on October 14, 2025, leading to a predicted increase in demand for computer replacements, necessitating the destruction of SSDs for laptops. The SSD shredder Flash EX will also be indispensable for data erasure and destruction service companies, as well as mobile data erasure and destruction service providers.

• others
• Firewall

A manual device capable of physically destroying HDDs with 6 tons of hydraulic power and 4 destruction bits. By replacing the destruction tool, it can also destroy SSDs and magnetic tapes.

1. Simple operation by just inserting the HDD into the main unit and moving the handle up and down by hand. 2. Destructive power of up to 6 tons. 3. HDD destruction is possible with high hydraulic power. 4. Creates four holes in the HDD and destroys the HDD platter in a single destruction cycle. 5. By exchanging various destruction tools on a single main unit, physical destruction of SSDs and magnetic tapes is also possible (world's first). 6. Even if the destruction bit (pin) is damaged or worn, the tip bit can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the destruction shaft from becoming stuck after destruction. 8. Battery operation is possible even in places without power, enabling on-site destruction work (world's first).

• Entrance and exit control system
• Security Assessment

An article has been published regarding the case study of the introduction of the expense reimbursement system "Rakuraku Seisan" and the attendance management system "KING OF TIME" at Racam Co., Ltd. ~ In the case of Racam ~ Before the introduction of "Rakuraku Seisan," applications were paper-based. One person was responsible for checking the contents for about 100 individuals using a calculator. Since actually using the system, various tasks related to determining who to pay and how much have been reduced, and it has become possible to import the crucial journal entries. Most importantly, the elimination of the need to research transportation costs one by one has been a significant improvement. The successful implementation of the attendance management system was made possible by the generous support provided by iBP. [Case Overview (Partial)] ■ Challenges Before Implementation - Wanted to eliminate paper-based reimbursement and application processes ■ Key Points of Implementation - High recognition of Rakuraku Seisan - With iBP, both expense reimbursement and attendance management can be handled together *For more details, please refer to the related links or feel free to contact us.

"Somewhat inconvenient" can quickly transform into "cost" and "risk" due to an increase in the number of employees or an expansion of business scope. What we are introducing this time is the process of a home care industry company with around 700 employees verbalizing their frustrations regarding payroll operations and considering the optimal system configuration. When we verbalize "somewhat inconvenient"... 1) The support quality of the payroll system being used is poor, causing significant stress. 2) The number of employees has been on the rise in recent years, raising concerns about running costs due to the pay-per-use system. 3) Macros are being used for data integration with a separate system. 4) We want to make backend processes like payroll payment reports easier. Information from iBP What is important here is to decide how to handle the multiple issues that have arisen, which is the "prioritization of tasks." You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/36302

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We have released an introduction document for our cloud management system "Loglass." This document clearly presents the features and usage images of "Loglass," which streamlines management tasks such as budget formulation, performance management, forecast updates, and management accounting. Loglass centralizes data scattered across various systems and spreadsheets, reducing the effort required for collection, aggregation, and analysis, thereby supporting quicker and more accurate management decisions. Additionally, it helps address challenges such as the personalization of management tasks and increased workload through automation of data aggregation, history management, and real-time analysis functions. The document also includes actual implementation examples and the effects of implementation, showcasing results such as reduced workload, enhanced analysis capabilities, and improved decision-making speed. Companies considering promoting DX in management or reviewing operations centered around Excel and spreadsheets are encouraged to take a look.