*New Special Price* Connector Product for Powder and Granular Materials 'BFM Fitting'

- New Purchase Campaign Ongoing - The shoot piping can be attached and detached without tools. It seals the connection points securely, preventing powder leakage and accumulation.

【New Purchase Discount Campaign Until the End of September 2024】 We offer the "First-Time Set Discount Price" exclusively for new purchases! Additionally, for six months after your purchase, you can also apply a "20-30% discount" on additional purchases! Please feel free to consult us for more details. The 'BFM Fitting' is a connector product that allows for the attachment and detachment of shoot piping without tools, contributing to high sealing performance and preventing powder material leakage. It exhibits excellent sealing properties even in high-pressure environments of 60 kPa, and its superior material strength makes it resistant to tearing and detachment. You can choose products that meet your needs from a wide range of options, including usable temperature ranges, static electricity measures, and breathability. 【Features】 ■ Shoot piping can be installed in as little as 40 seconds, contributing to increased productivity. ■ Reduces the risk of powder accumulation and scattering during removal. ■ Available in a wide range of sizes in 50mm increments. ■ A transparent type is also available, allowing you to check the transport status from the outside. *For product details, please refer to the PDF download.

• others

This is a specification made of transparent thermoplastic polyurethane, suitable for use in environments where static electricity is a concern.

"Seeflex 040AS" is a non-breathable connector made from transparent thermoplastic polyurethane with added antistatic agents. Its flexible material provides resistance to bending, making it suitable as a flexible material. It has excellent abrasion resistance, chemical resistance, and tear resistance. This product is a suitable choice for achieving a dust-free factory through dust and dirt prevention. 【Features】 ■ Designed for applications where static electricity is a concern ■ Resistant to bending, making it suitable as a flexible material ■ Excellent abrasion resistance, chemical resistance, and tear resistance ■ A suitable choice for achieving a dust-free factory through dust and dirt prevention *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

The shoot piping can be attached and detached without tools. It seals the connection points securely, preventing powder leakage and accumulation. A product introduction video is currently available.

The "BFM Fitting" is a connector product that allows for the attachment and detachment of chute piping without the use of tools, contributing to the prevention of powder material leakage with high sealing performance. It exhibits excellent sealing properties even under high-pressure environments of 60 kPa, and its superior material strength makes it resistant to tearing and detachment. You can choose products that meet your needs from a wide range of options, including usable temperature ranges, the presence or absence of static electricity measures, and permeability. *Demo units are available for free rental. Please feel free to apply through the "Contact Us" section. 【Features】 ■ Chute piping can be installed in as little as 40 seconds, contributing to increased productivity. ■ The risk of powder accumulation and scattering during removal can also be reduced. ■ A wide range of sizes is available in 50mm increments. ■ A transparent type that allows you to check the transport status from the outside is also available. *For more product details, please refer to the PDF download.

• others

This is a bag loader for filling flexible containers that can be used regardless of the presence of an inner liner.

The "BFM(R) Bag Loader for FIBC" is a product that enables clean and efficient filling. It is equipped with a three-layer filling head that is completely covered with a stainless steel tube and SeaFlex polyurethane resin. Additionally, it comes with an 8mm air injection plug that connects to an air pressure line, allowing the robust and flexible outer layer to be inflated with air pressure. It can be used with either type of FIBC, regardless of the presence of a liner (inner bag). 【Features】 ■ The inner and outer sleeves are made of durable "SeaFlex" polyurethane resin ■ Stainless steel core tube wrapped in a SeaFlex sleeve ■ The lower end features a stainless steel ring wrapped in the sleeve ■ 8mm L-shaped compressed air inlet (the mounting part is reinforced) ■ Inflates in seconds and fits snugly to the neck of the FIBC *For more details, please refer to the PDF document or feel free to contact us.

• others

A cap made of highly durable transparent thermoplastic polyurethane that prevents contamination and foreign matter intrusion.

By using the "BFM Blanking Caps," you can prevent contamination inside the piping during cleaning and replacement. They protect the products being manufactured and prevent the release of dust into the factory. "BFM Socks/Bins" are also suitable as collection containers for oversized powders coming from the shifter. Additionally, they are transparent to check the filling level and product quality, and you can insert a plastic bag inside the Socks to quickly collect discharge and maintain hygiene levels. 【Features】 ■ Prevents contamination inside the piping during cleaning and replacement ■ Protects the products being manufactured ■ Transparent for checking filling levels and product quality ■ Quickly collects discharge ■ Made from high-durability Sheeflex 040E *For more details, please refer to the PDF materials or feel free to contact us.

• Parts and Materials

Made of lightweight transparent thermoplastic polyurethane, it is ideally suited for equipment such as measuring instruments.

The "Seeflex 020E" is a non-breathable connector made of transparent thermoplastic polyurethane. It utilizes a lightweight Seeflex material, which is also highly resistant to wear, making it suitable for devices such as load cells and lightweight machines. This product is an excellent choice for achieving a dust-free factory through dust and dirt prevention. 【Features】 - Utilizes lightweight Seeflex material - Made of transparent thermoplastic polyurethane - Flexible material with strong resistance to bending - Highly resistant to wear - Smooth welding finish *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

These are exhaust and intake parts made of 100% polyester felt suitable for breathable applications.

The "FM1 Breather" is a product made from 100% polyester felt. It is designed for breathable applications that exhaust from hoppers and other container vessels. This BFM air vent is necessary for applications that require a 100% sealing system constructed with BFM connectors. 【Features】 ■ Made from 100% polyester felt ■ Designed for breathable applications that exhaust from hoppers and other container vessels ■ Necessary for applications that require a 100% sealing system constructed with BFM connectors *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

It is made of woven fabric material that is optimal for use in low-temperature environments down to -70°C.

The "LM3" is a breathable connector made of 100% polypropylene woven fabric. It is suitable for use in low-temperature environments down to -70°C. It is appropriate for use in food processing and is particularly effective when some breathability is needed to relieve pressure. Please feel free to contact us for inquiries. 【Features】 ■ Made of 100% polypropylene woven fabric ■ Suitable for use in food processing ■ Particularly effective when some breathability is needed to relieve pressure *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

It is a strong pressure-resistant specification with a polyester lining inserted into transparent thermoplastic polyurethane.

The "Seeflex 060ES" is a connector that enhances durability against positive pressure by incorporating a polyester inner layer into transparent thermoplastic polyurethane. The polyester layer, which is welded on the inside, restricts the expansion of the connector, achieving excellent positive pressure resistance. It is suitable for continuous use in overpressure conditions of up to 1.3 bar. 【Features】 ■ Enhances durability against positive pressure by incorporating a polyester inner layer into transparent thermoplastic polyurethane. ■ The polyester layer welded on the inside restricts the expansion of the connector, achieving excellent positive pressure resistance. *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

It is a flexible connector made of transparent thermoplastic polyurethane, designed for CIP cleaning.

"Seeflex 040E" is a non-breathable connector made from transparent thermoplastic polyurethane. Its flexible material provides resistance to bending, making it suitable as a flexible material. It has excellent chemical resistance for CIP and cleaning purposes. It can be used in various applications, including sanitary, vibration equipment, shifters, and powder handling devices. 【Features】 ■ Made from transparent thermoplastic polyurethane ■ Resistant to bending, suitable as a flexible material ■ Excellent abrasion resistance ■ Smooth finish on welded surfaces ■ A suitable choice for achieving a dust-free factory through dust and dirt prevention *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

It is a fabric material specification optimized for use in high-temperature environments up to 130℃.

The "LM3" is a connector made of woven fabric that is 100% polyester (breathable). It can be used in high-temperature environments up to 130°C. It has a glossy finish and is mainly used in applications where ventilation is required in the flexible part. Please feel free to contact us for inquiries. 【Features】 ■ Made of 100% polyester woven fabric ■ Mainly used in applications where ventilation is required in the flexible part ■ Usable in high-temperature environments up to 130°C *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

Maintains high flexibility down to -73℃ (-99°F)! Designed to dissipate static charges.

"Teflex NP Opaque" is a non-breathable PTFE (Teflon) product. It complies with FDA and EU standards for use in food processing. It can withstand temperatures up to 300°C for intermittent use and up to 316°C/600°F for short periods. Additionally, it maintains high flexibility down to -73°C (-99°F). 【Features】 ■ Non-breathable PTFE (Teflon) product ■ Usable in high-temperature environments ■ Can be used without being affected by corrosive and acidic products ■ Designed to dissipate static charges ■ Complies with FDA and EU standards *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

Compliant with FDA and EU standards! Can be used without being affected by corrosive and acidic products.

"Teflex NP Black" is a non-breathable connector designed to dissipate static charges. It can withstand up to 300℃ for intermittent use and up to 316℃/600°F for short periods. It maintains high flexibility down to -73℃ (-99°F). Additionally, it complies with FDA and EU standards for use in food processing. 【Features】 ■ Non-breathable PTFE (Teflon) product ■ Maintains high flexibility down to -73℃ (-99°F) ■ Can be used without being affected by corrosive and acidic products ■ Designed to dissipate static charges *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

"Somewhat inconvenient" can quickly transform into "cost" and "risk" due to an increase in the number of employees or an expansion of business scope. What we are introducing this time is the process of a home care industry company with around 700 employees verbalizing their frustrations regarding payroll operations and considering the optimal system configuration. When we verbalize "somewhat inconvenient"... 1) The support quality of the payroll system being used is poor, causing significant stress. 2) The number of employees has been on the rise in recent years, raising concerns about running costs due to the pay-per-use system. 3) Macros are being used for data integration with a separate system. 4) We want to make backend processes like payroll payment reports easier. Information from iBP What is important here is to decide how to handle the multiple issues that have arisen, which is the "prioritization of tasks." You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/36302

We have released an introduction document for our cloud management system "Loglass." This document clearly presents the features and usage images of "Loglass," which streamlines management tasks such as budget formulation, performance management, forecast updates, and management accounting. Loglass centralizes data scattered across various systems and spreadsheets, reducing the effort required for collection, aggregation, and analysis, thereby supporting quicker and more accurate management decisions. Additionally, it helps address challenges such as the personalization of management tasks and increased workload through automation of data aggregation, history management, and real-time analysis functions. The document also includes actual implementation examples and the effects of implementation, showcasing results such as reduced workload, enhanced analysis capabilities, and improved decision-making speed. Companies considering promoting DX in management or reviewing operations centered around Excel and spreadsheets are encouraged to take a look.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Caught up in daily data entry, approvals, and inquiries, I want to improve but can't find the time to consider it. Such voices from the field are not uncommon. Even though it's clear that systemization is necessary, the reality is that people often get stuck on where to start and which products to choose. Common frustrations include "I spent time requesting materials and demos, but I'm not sure if it fits my company," and "After implementation, the inquiry contacts are scattered among different manufacturers, making it hard to connect quickly when issues arise." This moves us further away from the original goals of efficiency and reducing dependency on individuals. This is where the option of "agent implementation" comes into focus. Agents that handle products from multiple manufacturers have the advantage of providing unbiased comparisons and neutral proposals without favoring specific products. Even within the same category of systems, they can present the pros and cons side by side for a balanced evaluation. There is also a common misconception regarding pricing; in most cases, there is little to no price difference between direct sales from manufacturers and agents. You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/33869