Notice of Participation in the 8th Railway Technology Exhibition 2023

[Free Sample Available] A heating material made by turning a new carbon nanotube (CNT) material into a paint and applying a thin film coating.

Unlike planar heating elements made of metallic materials such as nichrome wire, this is a material that heats uniformly across its entire surface. HEATNEX utilizes CNT as a resistive element and prints it onto a film, achieving a flexible heating material. By adjusting the transparency, it can be made close to transparent and can also accommodate specifications that allow light to pass through. 【Features】 ■ A flexible heating material that can heat uniformly across its entire surface. ■ Efficient heating through heat conduction and far-infrared radiation. ■ Excellent thermal conductivity and thermal radiation, allowing for instant heating and heat dissipation. ■ It is possible to create a lightweight planar heating element by forming electrodes with conductive paste, etc. ■ Capable of emitting approximately five times more far-infrared radiation than metallic heating elements. *Evaluation results are based on internal comparisons. 【Newly Developed Products】 High-Temperature Compatible Products - Heat Resistance: 200℃ (Standard Product: 80℃) Using polyimide as the substrate allows for heating at higher temperatures compared to standard products. Low-Voltage Compatible Products - Heat Resistance: 80℃ - Surface Resistivity: 30Ω/□ (Standard Product: 150Ω/□) Can be used at low voltage, making it widely applicable. *For more details, please download the materials or contact us.

• others

[New Product] Ideal Isert for Reinforcing Female Threads in Resin Base Materials!

This is an insert nut suitable for reinforcing the internal threads of resin substrates. It has a self-tapping feature, eliminating the need for tapping and providing excellent workability. There are stop holes at both ends, allowing for insertion from either direction without any orientation. Additionally, the chips generated during insertion are completely collected by the stop holes, so there is no need for removal. It has threads on the inner diameter side, making it ideal for reinforcing the threads of substrates with low strength.

• others

Certified by the Japan Architecture Center! Just attach it to the installed nut to effectively prevent loosening and falling off of bolts and nuts!

It is significantly more effective than double nut anti-loosening measures and can reduce maintenance inspection processes. It also contributes to approximately 40% weight reduction. It can be easily installed using commercially available socket wrenches. It has passed tests using an impact-type vibration testing machine compliant with NAS3350 standards. The sizes range from M4 to M24. 【Product Features】 ○ Compliant product evaluated by the Japan Building Center (BCJ evaluation - LS0107-01, applicable to M12). ○ The anti-loosening performance of LockOne has been proven in tests using an impact-type vibration testing machine compliant with NAS3350 standards. ○ Available in sizes from M4 to M24. ○ Can be installed with a commercially available 12-point socket wrench. ◎ For more details, please download the catalog or contact us.

• Fastening hardware
• Interior and exterior construction accessories
• Work tools

Significantly reduce work time by one-third without removing the tang. Trial kits are also available in the lineup.

The "Tangless Insert" is a female thread reinforcement material that can be inserted without a tang using a special tool. Since the insert has no directional orientation, it can be inserted from either side. There is no need to break off or search for the tang after insertion, which reduces the working time by about one-third compared to conventional products, thereby improving work efficiency. 【Features】 ■ No specialized skills required. Anyone can easily perform the task. ■ Minimally damages the female thread during extraction. ■ Both manual and automatic extraction of the insert are possible. ■ A kit that includes manual insertion tools, drills, and taps is also available (three products: M4/M5/M6). *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

Achieve cost reduction and weight reduction! With deep drawing processing, a production efficiency increase of up to 4 times is possible.

We propose value-added (VA) solutions by transitioning our products, which were traditionally processed through cutting and pipe processing, to deep drawing processing. By switching from cutting processes, we achieve not only cost reduction but also weight reduction. Furthermore, by transitioning from pipe processing, we also achieve high precision. At Advanex, we can accommodate various shapes through our unique manufacturing methods. Please refer to the attached photos for the shapes. 【Bulge Processing】 [Points] - Capable of processing bulge shapes in the middle section of tubular products. - Unlike conventional bulge forming processes, we can create bulge shapes in the product's middle section using only molds. 【Giboshi Processing】 [Points] - Capable of processing with a necked shape (giboshi shape) at the tip. - By adding a neck to the product's tip, we can enhance the pull-out strength against vibrations. - Since deep-drawn products are processed with giboshi, there are no seams in the product. 【Irregular Drawing】 [Points] - Through transfer drawing, integrated forming from blanking to irregular drawing can be achieved within a single mold. - Complex irregular shapes can also be formed within the mold. For more details, please contact us or download the catalog.

• others

It is achieved by insert molding high-precision products that are difficult to handle with assembly processes such as press fitting and welding.

At Advanex, we are equipped with all technologies from press processing to injection molding, and we carry out production on a consistent line. We have injection molding machines ranging from 40 to 100 tons, capable of processing products from very small to medium-sized. We can design and manufacture everything in-house, from press molds to injection molds and automatic machines. This allows us to aim for reduced assembly man-hours, miniaturization, thinness, and high precision, while also proposing the best component designs for our customers. Additionally, we can accommodate insert molding in the Dongguan area of China.

• others

We can accommodate from "micro springs" with a wire diameter of Φ15 microns to "precision springs" of Φ4.0 millimeters.

Please feel free to consult us from the design stage. We will provide proposals tailored to your needs, including calculations for durability performance, considerations for manufacturability, integration of multiple parts into a single component, and introductions to new materials. We offer support for design, prototyping, and mass production in Japan, as well as overseas mass production in countries such as China, Vietnam, and Thailand.

• others

By equipping both multi-forming machines and press machines, various processes are possible, including complex shapes and cost-effective material processing.

At Advanex, we possess a wide variety of equipment, including our own multi-forming machines, general-purpose press machines, high-speed press machines, 250t link press machines, and NC machines. We can produce precision springs with thicknesses ranging from 30 microns to approximately 2.0 millimeters, not only domestically but also in overseas locations such as China and Thailand.

• others

In the field of food and health food research and development, an increasing number of companies are facing the following challenges: - Difficulty in exploring new functional materials and differentiation themes, leading to a depletion of research topics. - While they are collecting information from conferences and papers, they struggle to translate this into research themes directly related to their products. - They remain limited to competing similar products and follow-up projects, failing to establish uniqueness. - Although there are seeds of ideas, they struggle to elevate them to scientific hypotheses and build the necessary foundations for internal approval. Behind this lies a "wall of execution" that cannot be overcome by traditional information gathering and research processes. In this webinar, we will introduce a new R&D approach to break through these challenges. It is a next-generation research and development scheme that combines AI-driven hypothesis generation, which has achieved results in drug discovery, with scientific hypothesis verification by a food human trial CRO. This will allow for the transformation of vague ideas into scientifically verifiable projects, simultaneously achieving the construction of persuasive foundations for upper management and differentiation development.

Fujikohsuhou Industrial Co., Ltd. will hold an online seminar titled "Tips for Setting Laser Hardening Conditions" on July 20, 2025 (Wednesday). In laser hardening, factors such as output and speed are related to the quality of hardening. We will explain how output and speed are connected to quality factors. This seminar is aimed at those who are looking to start utilizing laser hardening. 【Recommended for】 ■ Those who want to learn about methods for setting laser hardening conditions ■ Those who want to obtain technical information about laser hardening

Take the 'first step' in DX talent development in Fukuoka. We will hold a free seminar where you can learn reskilling strategies that can be applied in the field through case studies and experiences! 'I've become responsible for DX, but I don't know where to start.' This is a participatory seminar aimed at representatives from small and medium-sized enterprises in Fukuoka City, Fukuoka Prefecture, where you can learn the 'first steps' in DX talent development and implementation support. While introducing case studies of representative DX tools such as Power Automate and Power BI, you will experience hands-on sessions with Copilot, allowing you to grasp practical small-start methods that can be implemented on-site. The content also includes specific success stories from the Fukuoka region, along with tips for promoting understanding and advancement within your organization.

We will be exhibiting at INCHEM TOKYO 2025, which will be held at Tokyo Big Sight from September 17 (Wednesday) to September 19 (Friday). This time, we will host many events, including special project stages and mini-seminars. At our booth, we will introduce our solutions and technologies based on the theme of "Sustainable Plant Engineering" from three different concepts. Please be sure to stop by our booth, East Hall 6, K-17.

The Siemens EDA Tech Forum is a technical event aimed at sharing the latest technological trends, case studies, and solutions to challenges with everyone involved in the design and development of silicon systems and electronic systems, while addressing evolving technologies, the densification and complexity of designs, and various design challenges, all while meeting requirements for quality, safety, and reliability. The goal is to deepen insights and networks towards achieving sustainable business. The forum covers a wide range of topics, from advanced design technologies and methods in fields such as 3D ICs, chiplets, chips for AI and ML (machine learning), and IC packaging, to the design, analysis, and collaborative development of electronic systems, including printed circuit boards, across multiple domains, as well as building ecosystems both internally and externally using digital threads. Through case presentations and explanations of design methods by industry leaders, it supports solutions to challenges faced in daily design work from all directions. This is a free technical event that requires pre-registration. We hope you will participate!