Our ultrasonic spray nozzle, a product we handle, was featured in the semiconductor special edition.

Atomization of liquid without pressure by piezo vibration for spraying. Enables uniform application while reducing power consumption and liquid waste.

Ultrasonic waves are transmitted to the nozzle through the vibration of piezoelectric ceramics, vibrating the liquid film to form and spray fine particles. It accommodates a wide range of liquid flow rates from a minimum of 10 ml/min to a maximum of 100 ml/min, with particle size remaining almost constant across the entire flow range. ◆Product Features◆ - Energy-saving as it can supply liquid with low power without pressurizing - Uniform atomization regardless of flow rate - Particle size remains almost constant across the entire flow range - Resistant to clogging, ensuring high operational safety - Good coating efficiency due to the slow self-velocity of particles - Maximum flow rate for standard specifications is 100 ml/min - Operating frequency ranges from 20 to 130 kHz (varies by model) - Outer particle diameter ranges from 11.8 to 42 μm (varies by model) ◆Accessories◆ By using an air transport device, it is possible to freely change the spray shape of the applied fine particles (droplets). ◆Liquid Delivery Pump◆ Precise control is possible by using a syringe pump or similar device for liquid delivery. ≪Key Point≫ Demo units are available for loan, so please feel free to contact us. ※※Ultrasonic Cleaning Device※※ Sonosys also manufactures and sells ultrasonic cleaning devices.

• others

Atomize the coating liquid with piezo vibrations! Minimal splatter and rebound without pressure! Compatible with a wide range of flow rates.

The Sonia Corporation's "Ultrasonic Spray Nozzle" utilizes piezoelectric vibrations to agitate liquids, forming fine particles and spraying them. It can accommodate a wide range of liquid flow rates from 10 mL/min to 100 mL/min, and since it does not apply pressure to the liquid, it features minimal splatter and rebound. This eliminates waste of the applied liquid and removes the need for large booths. It is suitable for applications such as coating, humidifying, and disinfecting. 【Features】 - Resistant to clogging and high operational safety - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and inexpensive running costs - Available in two types: wide spray and narrow spray. ★We are currently offering demo units that you can try out!★

• others

A new challenge with the Sonia Corporation's low-flow ultrasonic spray nozzle!

Low Flow Ultrasonic Spray Nozzle (Atomizer) The low flow spray nozzle (atomizer) manufactured by Sonia is designed to apply droplets (particles) of various viscosities in micron and submicron sizes without over-applying them to small parts. The nozzle shape comes in two types: flat and wide nozzle tips. It is suitable for concentrated application using an ultrasonic spray nozzle and a pinpoint air transport device (custom order) or for transporting very small droplets (particles). These spray nozzles can be easily applied to applications requiring controlled coating and uniform films. The spray nozzle is lightweight and ideal for coating systems using robots. The main body of the spray nozzle is made of stainless steel. *Custom micro feed tubes are suitable for low flow application and are available in stainless steel or PTFE fluororesin. The spray nozzle can be equipped with a spray shaper for pinpoint spraying or a wider spray for better coating control. *Micro feed tubes are optional items.

• others

Flow spray of 2 mmlit/min or less is now possible!

【Sonaer】 Low flow spray nozzle manufactured by Sonia Corporation It can focus on small parts without waste by creating micron and submicron particles. There are two types of nozzles: flat and wide spray tips. These nozzles are ideal for pinpoint spray shaping, allowing for precise particle focus and minimizing solution waste. With these nozzles, coating control becomes possible, easily adapting to applications that require thin and uniform application. This nozzle is lightweight, making it attractive for use in robotic coating systems. The nozzle is available in a lightweight black aluminum case (custom-made) or a stainless steel case with a stainless steel inner feed tube. The micro feed tube can be used for microliter capacities and is available in stainless steel and PTFE. The nozzle can utilize a spray shaper for pinpoint spraying, providing better control over your coating applications.

• others

A collaborative product of Lehira's nozzle technology and Sonosis's ultrasonic technology.

Particles (droplets) formed by the ultrasonic spray nozzle are broken up by the vibration of the piezo element. In other words, unlike pressurized systems, the particles do not have speed. As a result, they either fall naturally or become suspended due to the influence of wind. Therefore, carrier air is used to transport the formed particles for application.

• others

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Dakota Japan Co., Ltd., which specializes in the sale of ultrasonic testing equipment such as ultrasonic thickness gauges, flaw detectors, and axial force gauges, will begin selling its new product, the A-scan ultrasonic thickness gauge 'CMX10-DL', starting June 15. The 'CMX10-DL' is a versatile A-scan ultrasonic thickness gauge that caters to a wide range of applications, from corrosion inspection to high-precision thickness measurement. It supports the measurement of remaining wall thickness in tanks and pipes, substrate thickness measurement over coatings, as well as the measurement of lining materials, composite materials, and clad materials, including precision thickness measurements requiring a resolution of 0.001mm. The CMX10-DL not only saves echo waveforms and measurement values but also supports echo recording for up to 10 seconds. This allows for the recording of instantaneous thickness changes or waveform changes during measurement, thereby streamlining the verification of inspection results and report generation. Additionally, with TCG (Time Corrected Gain), BEA (Bottom Echo Monitoring), and B-scope (B-scan), it supports reliable measurements even for challenging targets such as composite materials, clad materials, and localized corrosion, where waveform judgment can be difficult.

Dakota Japan Co., Ltd., which specializes in the sale of ultrasonic testing equipment and hardness testers, has launched two new models of rebound hardness testers, "Leeb Lite" and "Lab Leeb," starting May 20. The "Leeb Lite" and "Lab Leeb" are rebound hardness testers suitable for measuring the hardness of metallic materials with a mass of over 5 kg and a thickness of over 25 mm. They are lightweight, compact, and easy to operate, making them user-friendly for those conducting hardness measurements for the first time, and they enable stable measurements in the field. The rebound (Leeb) method is suitable for measuring the hardness of large components and can be applied to a wide range of targets, including cast and forged products, welds, machined parts, and heat-treated items. Additionally, the "Lab Leeb" supports Bluetooth communication, allowing it to connect to smartphones and tablets for use. With the dedicated app "NOVOTEST Lab," users can view measurement values on a large screen, and data sharing of reports, photos, and videos can be done smoothly.

Palmholtz, which is working on the development of new materials utilizing discarded oil palm trunks (OPT), will establish a system for increased production of the new materials starting in May. The technology for developing the new materials recently received the "Monozukuri Nippon Grand Award Chubu Bureau of Economy, Trade and Industry Director's Award." Taking this opportunity, inquiries have been received from major global e-commerce (EC) companies, accelerating the movement towards commercialization. The company will also respond to demands for increased supply from existing customers.