Speed reducers, speed increasers, transmission devices, forward/reverse switching [Available for order from one unit!]

Are you having trouble finding the same product during a replacement? We can accommodate modifications of standard products or new designs and manufacturing at a low cost starting from just one unit!

A non-stop transmission that allows for instant and precise shifting even while rotating! With a slide key mechanism, precise shifting is possible whether in motion or at a standstill. Gears and shafts are made from chrome molybdenum steel and undergo carburizing hardening, ensuring ample strength. It operates quietly, is compact, lightweight, and economical. The installation of the transmission and reducer can be done at any angle—horizontal, vertical, or sideways. If you contact us, we will send you detailed drawings, including dimensions, rotation speed, and gear ratios, via fax, mail, or email. Gears can be manufactured with a module range of 0.5 to 22. Compared to other companies' inverter products, it has fewer failures, consumes less power, and is economical! We have many models of reducers, speed increasers, transmissions, and forward/reverse switches that are not listed in the catalog. If you provide us with the power, horsepower, gear ratio, and reduction ratio, we will send you drawings of suitable models. Additionally, we can design and manufacture custom modifications of standard products or new designs at a low cost starting from just one unit. We can produce equivalent products to those from Yamai Manufacturing, Oya Manufacturing, Daito Seiki, and Taniguchi Reducer. We design and manufacture speed increasers for hydroelectric power generation and wind power generation.

• Transport machinery

Are you having trouble finding the same product when replacing it? We can accommodate modifications of standard products and new designs at a low cost, starting from just one unit!

A non-stop transmission that allows for instantaneous and precise shifting even while rotating! With the slide key system, precise shifting operations are possible whether in motion or at a standstill. Gears and shafts are made from chrome-molybdenum steel and are subjected to carburizing hardening, ensuring ample strength. It operates quietly, is compact, lightweight, and economical. The installation of the transmission and reduction gear can be done at any angle—horizontal, vertical, or sideways. If you contact us, we will send you detailed drawings, including dimensions, rotational speeds, and gear ratios via fax, mail, or email. Gears can be manufactured in modules ranging from 0.5 to 22. Compared to other companies' inverter products, our products have fewer failures, consume less power, and are more economical! Regarding reduction gears, speed-up gears, transmissions, and forward-reverse switching, we have many models not listed in the catalog. If you provide us with the power, horsepower, gear ratio, and reduction ratio, we will send you the drawings of suitable models. Additionally, we can design and manufacture custom modifications of standard products or new designs at a low cost starting from just one unit. We can produce equivalent products to those from Yamai Manufacturing, Oya Manufacturing, Daito Seiki, and Taniguchi Reduction Gear. We design and manufacture speed-up gears for hydroelectric power generation and wind power generation.

• Transport machinery

Are you having trouble because there is nothing the same when replacing products? We can accommodate modifications of standard products or new designs and manufacturing at a low cost starting from just one unit!

A non-stop transmission that allows for instantaneous and precise shifting operations even while rotating! With a slide key mechanism, precise shifting operations can be performed whether in motion or at a standstill. Gears and shafts are made of chrome-molybdenum steel, treated with carburizing hardening, ensuring ample strength. It operates quietly, is compact, lightweight, and economical. The installation of the transmission and reduction gear can be done at any angle—horizontal, vertical, or sideways. If you contact us, we will send you detailed drawings including dimensions, rotation speed, gear ratios, etc., via fax, mail, or email. Gears can be manufactured in modules ranging from 0.5 to 22. Compared to other companies' inverter products, our products have fewer failures, lower power consumption, and are more economical! We have many models of reduction gears, speed increasers, transmissions, and forward/reverse switches that are not listed in the catalog. If you provide us with the power, horsepower, gear ratio, and reduction ratio, we will send you drawings of suitable models. Additionally, we can design and manufacture custom modifications of standard products or new designs at a low cost starting from just one unit. We can produce equivalent products to those from Yamai Manufacturing, Oya Manufacturing, Daito Seiki, and Taniguchi Reduction Gear. We design and manufacture speed increasers for hydroelectric power generation and wind power generation.

• Transport machinery

Yamagai Manufacturing, Oya Manufacturing, Daito Seiki, Izumi Giken, Taniguchi Reducer, San Seiki - Some equivalent products can be manufactured.

Non-stop transmission capable of instant and precise shifting even while rotating. Compared to other companies' inverter products, it has fewer failures, lower power consumption, and is economical! With a slide key mechanism, precise shifting is possible whether in motion or at rest. Gears and shafts are made of chrome molybdenum steel and are subjected to carburizing hardening, ensuring ample strength. It operates quietly, is compact, lightweight, and inexpensive. The installation of the transmission and reduction gear can be done at any angle: horizontal, vertical, or sideways. If you contact us, we will send detailed drawings, rotation speeds, gear ratios, etc., via fax, mail, or email. Gears can be manufactured with a module range of 0.5 to 22. Since it uses mechanical reduction instead of electric reduction, there is no issue of torque drop at low speeds! ■ Reduction gear: Spur gear for approximately 0.75 kW to approximately 1000 kW ■ Increase gear: Spur gear for approximately 200 W to approximately 1200 kW ■ Transmission: Spur gear for approximately 0.75 kW to approximately 1000 kW ■ Forward/reverse switching: Spur gear for approximately 0.4 kW to approximately 37 kW ■ Other products: Equivalent designs can be manufactured. ■ Parts manufacturing: Gears, shafts, and other components can be produced. *For other details, please consult us.

• Transport machinery

We have published an introduction document for the solution "Easy Commuting Expenses," which supports the efficiency of commuting expense management. This document clearly presents the features and benefits of "Easy Commuting Expenses," which enables centralized management of commuting costs, including train, bus, and private car commuting. It streamlines tasks that place a heavy burden on staff, such as determining commuting routes, calculating refunds for commuter passes, responding to fare changes, and managing payment histories, while supporting fair and appropriate commuting expense reimbursements. Additionally, it includes case studies based on the implementation results from over 650 companies nationwide, as well as the effects of cost reduction and operational efficiency. Companies considering a review of commuting expense management or business improvements are encouraged to take a look.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

An article has been published regarding the case study of the attendance management system "KING OF TIME" implemented at Nichirei Industrial Co., Ltd. ~ In the case of Nichirei Industrial ~ The workload related to attendance management has decreased. With the transition from analog tasks to automated aggregation of working hours and granting of annual leave, we can now focus on our work with peace of mind. Particularly regarding the "punching method," we utilize fingerprint and facial recognition. By using biometric authentication, impersonation is not possible, and I believe the accuracy of attendance has significantly improved. Transparency has been ensured. 【Case Overview】 ■Challenges Before Implementation - Handwritten attendance sheets were used, resulting in input tasks to incorporate data into the payroll system. ■Key Points of Implementation - Systematization has reduced input tasks. Biometric authentication prevents impersonation. *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.