We have added Taiki Corporation to the case study collection for BricsCAD/ACAD-DENKI in 2D CAD/3D CAD.

We will introduce a case filled with key points for replacing from major general-purpose CAD.

■Do you have any of these concerns? - I want to switch to a DWG-compatible CAD, but I don't know where to start. - I want the CAD after the switch to be accepted and used by the field. - I don't know the evaluation points during the switch. Many companies are considering replacing their CAD with a DWG-compatible one for cost reduction and operational efficiency. However, even though it may seem simple to switch, there are surprisingly many things to consider, such as how to proceed with the project and adjustments with the field. By looking at this case study, you can get a concrete image of the switching process. Please feel free to download it. ■For CAD-related inquiries, please leave it to Zuken Alpha Tech. With 35 years of experience as a CAD developer, our company is dedicated to providing customers with "value-added solutions" by tackling various challenges every day. We will not only assist with the replacement of DWG-compatible CAD but also combine our own products and customizations to offer the best proposals. If you have any concerns regarding CAD, please consult with us.

• Drawing, tracing, CAD

We will introduce the secret behind achieving "initiatives for realizing DX" that are in sync with the field.

■Do you have any of the following concerns? - You are progressing with DX preparations but feel a disconnect with the on-site team. - You are not effectively utilizing drawing data. - The workload in the manufacturing site is increasing, and there is a shortage of manpower. In the control panel manufacturing sector, improving work efficiency due to a serious labor shortage has become a challenge, and like other manufacturing industries, there is an urgent need to respond to DX. However, many companies may still be clinging to traditional methods, making it difficult to prepare for DX. This case study is a valuable reference for such companies. Please feel free to download it. ■For CAD-related inquiries, please leave it to Zuken Alpha Tech. With 35 years of experience as a CAD developer closely supporting electrical design, we are committed to providing our customers with "value-added solutions" by tackling various challenges daily. We will not only replace DWG-compatible CAD but also combine our own products and customizations to offer optimal proposals. If you have any concerns regarding CAD, please consult with us.

• Drawing, tracing, CAD

【Affordable and High-Performance】A low-cost permanent license with high compatibility and expandability with AutoCAD. A must-see for those struggling with CAD costs!

BricsCAD is an affordable and high-performance CAD software that allows you to create 2D, 3D, and BIM all in .dwg files. ■ Do you have any of these concerns? ■ - The operational/implementation costs of CAD are burdensome. - I want to operate with a multi-license. - I'm considering switching from AutoCAD, but I'm worried about utilizing existing drawings. - I'm considering introducing 3D, but I'm concerned about learning how to operate it. - I'm using free/cheap CAD, but it lacks features. BricsCAD has been adopted by over 180,000 companies and more than 450,000 users worldwide, with over 10,000 companies in Japan alone. It is praised for its reliability, scalability, and stability. ■ What BricsCAD can do ■ ● Directly read AutoCAD drawings (.dwg) ● Flexible options for perpetual licenses, subscriptions, network licenses, etc. ● Reuse print settings, template drawings, and sheet sets ● Streamline repetitive tasks with AI-powered drawing features ● Customization migration (LISP, .NET, ARX, etc.) ● 3D design with direct/parametric modeling capabilities ● Support for IFC and point clouds Try the free trial version first!

• others

[Case Studies and Demo Videos Available] Solve challenges with specialized features packed with 35 years of know-how and the familiar operation feel inherited from AutoCAD/BricsCAD!

■Do you have any of these concerns? - Checking drawings and counting parts on paper takes a lot of time and is prone to errors. - Work by multiple people leads to inconsistent writing styles. - Unable to respond to short delivery times or link data to manufacturing. "ACAD-DENKI" is an electrical CAD developed by our company, which has been supporting electrical design for 35 years, and is compatible with the industry-standard DWG format. 【Achieving cost reduction and increased productivity】 Users have given high praise for the familiar operation and rich features inherited from AutoCAD and BricsCAD. It facilitates not only reuse design but also smooth collaboration between different departments. The launch is supported by various support menus from experienced staff, ensuring peace of mind. Customization is available! ■Features ▼Full utilization of electrical-specific functions for increased efficiency - Various wiring inputs (automatic generation of intersection marks, automatic wire cutting, special wiring) - Symbol input (symbol palette, pattern registration and input) - Line number input, IO diagrams, terminal block tables, panel diagrams creation - Continuous printing ▼Significant efficiency improvements and prevention of errors through automatic processing functions - Relay and jumper wire calling - Drawing check function ▼Output of wiring connection information list - From-To list and external terminal list output function

• others

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

On December 23rd (Tuesday), the Japan Meteorological Agency announced the three-month forecast for January to March. During this period, there will be times when the extension of the Siberian high pressure is weak to the northeast and strong to the southeast, which may lead to the influence of cold air from the west. As a result, temperatures nationwide are expected to be nearly average from January to February. For more details, please visit our company website.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8