Notice of partial price revision and discontinuation of digital signage stand sales.

The best-selling digital signage stand DS-S series at SDS.

The display stand from SDS is designed to be stable and durable, as it undergoes safety testing for all products. After confirming safety through calculations, actual products are used for safety tests to ensure that all products meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. 【Features of DS-S Type1】 Type1 (minimum type) is a digital signage stand with a simple design that focuses on cost performance by omitting the front frame cover and STB storage box. The DS-S series is a stand that eliminates assembly time as it is shipped pre-assembled. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

The best-selling digital signage stand DS-S series at SDS.

The display stand from S.D.S is designed to be stable and durable, as it undergoes safety testing for all products. After confirming safety through desk calculations, actual products are used for safety tests to ensure that all products meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. 【Features of DS-S Type2】 Type2 (Economy Type) is a simple design digital signage stand equipped with a front frame cover, based on Type1 (Minimum Type). The DS-S series is a stand that eliminates the assembly time required, as it is shipped pre-assembled. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

The best-selling digital signage stand DS-S series at SDS.

The display stand from SDES is designed to be stable and durable, as it undergoes safety testing for all products. After confirming safety through desk calculations, we conduct safety tests using actual products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. 【Features of DS-S Type3】 Type3 (full specification type) is a simple design digital signage stand equipped with a front frame cover and STB storage box, built on the Type1 (minimum type). The DS-S series is a stand that eliminates assembly time, as it is shipped pre-assembled. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a catalog in booklet form, please do not hesitate to let us know.

• others

A digital signage stand that can accommodate displays up to W600×H600mm, making it compatible with a wide range of overseas displays.

The display stands from SDS are designed to be stable and durable, as they undergo safety testing for all products. After confirming safety through calculations, we conduct safety tests using actual products to ensure that all items meet safety standards. From the design stage, we prioritize stability and durability in our product development. 【Features of the Large Digital Signage Stand】 The large digital signage stand is compatible with digital signage displays ranging from 65 to 80 inches. It supports VESA dimensions up to W600×H600mm, making it compatible with a wide range of displays, including those from overseas manufacturers. *Please note that some displays may not be compatible, so please inquire about the displays you intend to use. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

Mobile stand exclusively for touch displays.

The display stands from SDS are designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are difficult to tip over and break. The iTouch stand is a portable stand ideal for the use of simple touch displays. It can be easily set up wherever you want to place a touch display, which is expected to become increasingly useful with multilingual support, allowing for safe touch operations. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us.

• others

A stand that can be installed with large displays on both the front and back sides.

The display stands from SDS are designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we prioritize stability and durability in our product development. The double-sided signage stand is a simple and stylish stand that can accommodate large displays up to 65 inches on both sides. By mounting displays on both the front and back, it enables extensive information dissemination in central plazas of shopping malls or busy walkways. *Please inquire about compatible displays, as some displays cannot be mounted. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

SBS Marketing Co., Ltd., which provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector based on practical experience in support companies and business companies, has published a page titled "Project Budget Overruns, Delays, and Increased Resource Burden!? 'Scope Creep'" on November 11, 2025 (Tuesday). 'Scope creep' refers to the gradual expansion of a project's initial scope without following formal processes, leading to delays, budget overruns, and increased resource burdens. The page explains examples of occurrence, the negative impacts that can arise, as well as the causes and countermeasures. (Page Overview: Excerpts) ■ What is 'Scope Creep'? ■ Examples of 'Scope Creep' occurrence ■ Negative impacts caused by 'Scope Creep' ■ Causes of 'Scope Creep' ■ Countermeasures to prevent 'Scope Creep' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/scope-creep-2025-11/

Starting from October 2025, Panasonic's indoor units for office and store air conditioners will be renewed! In this renewal, all models will come standard with "100 times nanoe X." This not only enhances comfort with commercial air conditioning but also contributes to improving air quality. Additionally, improvements in installation efficiency to enhance on-site work productivity and a strengthened lineup to accommodate diverse spaces have been implemented. The new indoor units are equipped with high concentrations of nanoe X as standard! They demonstrate a high effectiveness in purifying indoor air during air conditioner operation, providing a safer and more comfortable environment for office and store users and employees. Furthermore, the center of the suction inlet and the center of the hanging bolt have been unified. This allows for the combined use of canvas ducts and panels, improving installation efficiency. If you have any questions or would like a quote, please feel free to contact us. We will fully support you in replacing your commercial air conditioning!

We will be exhibiting at the "Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025," which will be held for two days starting from November 19 at Gran Messe Kumamoto (Masaki Town, Kamimashiki District, Kumamoto Prefecture). This exhibition is organized by the organizing committee of the Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025, aiming to enhance disaster prevention awareness through the introduction of advanced technologies and products related to disaster prevention, as well as to promote economic and technological exchanges. On the day of the event, we will showcase our "High Water Content Soil Improvement Agent MT Series" and "Soil Recycling Technology Bontelan Method," and we will introduce our technologies through practical demonstrations using actual soil. We invite those nearby to stop by our booth. Venue: Gran Messe Kumamoto (1010 Fukutomi, Masaki Town, Kamimashiki District, Kumamoto Prefecture, 861-2235) Date and Time: November 19 (Wednesday) 10:00 AM - 5:00 PM November 20 (Thursday) 9:30 AM - 3:30 PM Our Booth Location: B10 Presentation: November 20 (Thursday) 10:45 AM - 11:15 AM, Seminar Room 4 Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025 HP https://www.s-kumamoto.jp/