We have added a video explaining the Sonic blower and a case study (cooling) using the product to our company's YouTube channel.

"Sonic" water drainage drying is Sonic! We are introducing success stories and photos. [Simplified version]

This is a collection of case studies on Sonic Corporation's blower air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [removal of residues on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, and removal of residual water after cleaning contact lens pallets. We also include photographs. For more details, please contact us or refer to our catalog. We also have demo units available. You can try them out at your factory! Alternatively, you can conduct simple tests at our company! Please consider this!

• others

A product that suppresses water splashing generated during the inspection, printing, labeling, and water draining/drying of filled PET bottles, cans, bottles, and pouches before packaging.

The Sonic SMART Tunnel (Sonic Modular Air Tunnel) can be used in extensive water drainage drying systems. It is a turnkey product that dries PET bottles, cans, and bottles before inspection, printing, labeling, or packaging, with a processing capacity of 100 to 1500 CPM. Adaptability: The Sonic SMART Tunnel is a modular system. Due to its bolt-tight design, it can be easily expanded if changes in product size or additional air knife configurations are needed due to increased production line demands.

• others

Improved air knife of the conventional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

■High-Speed XE Air Knife The Sonic Corporation's High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A key feature is that there are no control plates inside the air knife, allowing for uniform blowing from end to end. Additionally, it effectively draws in the surrounding air to create a powerful blow. We offer a wide variety of options for the number, position, direction, and length of the nozzle's piping installation. We also provide the world's only rotary air knife.

• Conveyor

A specialized blower for draining/drying that uses a small motor to rotate at high speed and generate a large airflow!

Powerful air at over 25 m/s for water removal and drying! Additionally, time-saving and energy-efficient! Sonic Corporation's 'Blower & Air Knife' is a device that dramatically improves the efficiency of part drying, food processing drying, and water droplet removal. Processes that require a pressure of 400 kPa can be achieved with an ultra-high efficiency of just 29 kPa! It achieves a 75% reduction in energy consumption compared to compressor air, while maintaining a water removal efficiency of over 95%, resulting in significant energy savings. ≪Sonic Corporation Spiral Blower≫ 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with a small horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that greatly exceed those of compressors △▽△Basic Information△▽△ 【Product Lineup】 ■ Spiral Blower Thanks to proprietary technology, it generates a large airflow with energy efficiency compared to compressors and conventional blowers. The generated large airflow can be supplied continuously without pulsation. The structure is also easy to maintain.

• Conveyor

Blow away water, dust, and dirt from parts with high-speed air for quick drying. Demo units are also available for loan!

Water removal drying with Sonic Corporation's blower and air knife! By rotating the fan inside the blower at a minimum of approximately 12,000 rpm to 20,000 rpm, it is possible to achieve a larger airflow than that of compressors or domestic blowers. Additionally, another major feature of the Sonic air knife system is its economical nature, consuming only a fraction of the power compared to similar operations using conventional compressed air. Environmentally, it not only operates at low noise levels but also contributes to the reduction of carbon dioxide emissions due to its low power consumption. Demo units are available for loan, so please feel free to contact us. 【Demo Units】 ★ Unit 1 (Sonic 70) Flow rate: 3 Nm³/min to 13 Nm³/min Motor size: 5.5 kW *With inverter ★ Unit 2 (Sonic 85) Flow rate: 4 Nm³/min to 20 Nm³/min Motor size: 7.5 kW *With inverter ★ Air Knife Total length: 610 mm Maximum wind speed: approximately 170 m/sec Connection diameter: 3 inches Slit width: approximately 1 mm Note: Please contact us if a hose is needed.

• Conveyor

Sonic's blowers and air knives use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blowers! Demo units available for loan!

Are there any issues with the water drainage and drying processes for beverages, food, and food processing, as well as the blowing off of water droplets from cans, bottles, and PET bottles? ------ Such issues can be efficiently and economically resolved by the Sonic Air Knife System's high air volume and high-speed air! Tasks that previously required pressure like that of a compressor can now be achieved with just 29 kPa! When comparing the air volume of a compressor and a Sonic Blower, obtaining an air volume of 7 m³/min requires 62.5 horsepower from a compressor, whereas the Sonic Blower achieves this with only 4 horsepower. The difference is significant when compared to compressors and domestic blowers! 【Features】 ● Energy-saving effect reduces consumption by 75% compared to compressor air ● Water drainage efficiency of over 95% ● Generates a large volume of air with low horsepower ● The air is clean and dry, promoting evaporation with warm air at approximately 40°C ● Energy-efficient (compared to compressors) ● Lightweight and compact design *Demo units are available for loan, so please feel free to contact us. Additionally, if you can provide samples for testing, we will conduct tests at our company.

• others

Seeing is believing! Improve drying and reduce running costs by using high-speed air knives to remove water from air discharged by high-volume blowers!

Is there any problem with the Sonic food processing drying process and the blowing off of water droplets from cans/bottles? After sterilization and filling, it is also used for draining water before printing expiration dates on PET bottle caps, cans, retort packs, and for drying transport boxes. It is utilized in various industries, not only in the food sector but also for drying water from automotive parts, steel plates and pipes, and semiconductor components. The Sonic Air Knife System's high air volume and high-speed air efficiently and economically solve these problems! For those who have not been able to resolve these issues until now... we have numerous case studies for problem-solving! ***Videos will be updated regularly*** [Case Studies] - Examples for the food/beverage industry - Examples for the automotive industry - Examples for the pharmaceutical industry - Examples for the steel industry, etc. For more details, please contact us or download the catalog.

• container

Tilt the two air knives slightly and present a blowing method that focuses on the torso and upper part.

The air knife's gap or slot can be adjusted in length to allow for a wider gap. This means that the air knife concentrated on the body can maintain a standard gap while separately adjusting the knife's gap at the top and bottom to hit the handle and the lower ring. This method not only ensures that the air effectively hits the body of the canister but also reduces the required power consumption. SONIC has also suggested further cost reductions by using ABS piping instead of plated steel pipes to lower prices. [Content] [Issues] ○ Yankee Gas faced the problem of propane gas canisters not being sufficiently dry before going to the painting process while changing their solvent-based painting system. ○ Proper drying of the canisters is essential for effective painting. ○ The drying method they were using involved compressed air, which was ineffective and did not adequately remove moisture for painting. ○ High humidity means that no matter how much compressed air is applied, moisture remains on the canisters. For more details, please contact us or download the catalog.

• Conveyor

There was no need for additional construction, and it fit into the existing production line.

Sonic Corporation decided to operate the Sonic150 with 25 horsepower and two air knives, and to circulate air to raise the temperature coming from the air knives. The concept behind Sonic Corporation's revolutionary VT (patent pending) design is to utilize the pressure heat from the blower by partially circulating air. The exit temperature from the air knife will be approximately 45°C to 50°C. This method does not require an external thermal system. The air knife is installed about 10mm away from the bottle, allowing the bottle to pass through at a wind speed of approximately 9,300m/min. The high-speed air and heated exit temperature melt the ice and turn the remaining moisture into mist. As a result, the bottles can be completely dried. [Content] [Issues] ○ Moisture and cold air leave water droplets on the glass, resulting in the reformation of droplets before labeling. ○ Labels cannot be applied until the bottles are dried. ○ The injection and labeling of bottles can only occur after the empty bottles are stacked in a warmed warehouse and heated. For more details, please contact us or download the catalog.

• others

I have made it possible to repeatedly position the air knife.

We proposed 12 Sonic 70 blowers with 7.5 horsepower motors, enclosures, Sonic HEPA filters, and two custom 13" Sonic XE air knives. The performance of the air knives delivered at the beginning of this system perfectly matched the blow level requested by the customer. The results of the impurity contamination tests also confirmed that Sonic's HEPA filters maintained the requested 0.3μ. Additionally, to operate most effectively while keeping the noise level below 80dB, the angle and distance of the air knives are very important, so we manufactured custom Sonic air knives that fit the existing air knife enclosures, allowing for repeated positioning of the air knives. [Content] [Issues] - Compressed air with HEPA filters - The factory was using more compressed air for automatic devices on the production line and other equipment on a daily basis - Due to the increased demand for compressed air, there was a need to add another air compressor to avoid pressure drops For more details, please contact us or download the catalog.

• Conveyor

It has been proven to be the most cost-effective solution.

Sonic Corporation proposed a method to install a rotating air knife (patented) from above and a standard air knife from the side, angled from top to bottom. Due to the low production speed and the complex shape of the engine block, the rotating air knife has proven to be suitable. The rotating air knife can achieve a rotational speed of 200 rpm. By rotating the air knife and then blowing, it can deliver multiple high-impact blows to the surface of the parts with a single air knife. In cases of such complex shapes, attempting to achieve the same drying with other methods would require the installation of six air knives. This technology has proven to reduce horsepower and provide the most cost-effective solution while utilizing limited space. [Content] [Issues] - The surface of the engine block has many complex irregularities, and if water remains in these areas, it can ultimately lead to defective products. - The factory has found existing drying methods to be inefficient and is seeking an urgent solution. For more details, please contact us or download the catalog.

• Conveyor

Non-contact water removal and drying of wire cables using Sonic Corporation's blower and air knife.

We would like to introduce a successful application of the Sonic SP Dryer cable drying machine. A manufacturer of low-voltage wires and cables, as well as bare aluminum and copper wires, needed to install a spark tester before the final packaging process. This meant that the wire running at 3000 feet per minute (900 m/min) had to be completely dried before the spark test. Due to the rapid increase in line speed, traditional methods became costly and inefficient. If the cable is not completely dried, the inspection machine may misidentify it as defective. Because of the high-speed production at 3000 feet per minute (900 m/min), Sonic recommended the SP dryer. This is a drying device housed in a box that features air knife technology (XE 42” long) with a centrifugal blower (Sonic 150, 20 horsepower) to achieve energy savings. For more details, please contact us or refer to the catalog.

• others

Using it before the final drying provided results that exceeded expectations in terms of drying effectiveness.

Sonic Corporation's 96” (2.44m) air knife operates with the Sonic 100 (15 horsepower motor). Long steel plates flow under the air knife at a speed of 1.22m/min to 3.05m/min. The widths of these steel plates range from 48” to 96” (1.22m to 2.44m). Typically, this line runs for several days in two shifts and then stops for several days. Essentially, it operates continuously without stopping during the given shifts. This system provides unparalleled satisfaction to customers and has demonstrated exceptional drying effectiveness when used before final drying to blow away a significant amount of residual water. [Content] [Issues] ○ After blasting the material, it needs to be wiped and all remaining sand particles must be completely blown away. ○ In special cases, residual shot may occur after passing through the cleaning brush. ○ Residual shot material sticks to large electromagnetic surfaces, making transportation hazardous. For more details, please contact us or download the catalog.

• others

"Somewhat inconvenient" can quickly transform into "cost" and "risk" due to an increase in the number of employees or an expansion of business scope. What we are introducing this time is the process of a home care industry company with around 700 employees verbalizing their frustrations regarding payroll operations and considering the optimal system configuration. When we verbalize "somewhat inconvenient"... 1) The support quality of the payroll system being used is poor, causing significant stress. 2) The number of employees has been on the rise in recent years, raising concerns about running costs due to the pay-per-use system. 3) Macros are being used for data integration with a separate system. 4) We want to make backend processes like payroll payment reports easier. Information from iBP What is important here is to decide how to handle the multiple issues that have arisen, which is the "prioritization of tasks." You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/36302

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We have released an introduction document for our cloud management system "Loglass." This document clearly presents the features and usage images of "Loglass," which streamlines management tasks such as budget formulation, performance management, forecast updates, and management accounting. Loglass centralizes data scattered across various systems and spreadsheets, reducing the effort required for collection, aggregation, and analysis, thereby supporting quicker and more accurate management decisions. Additionally, it helps address challenges such as the personalization of management tasks and increased workload through automation of data aggregation, history management, and real-time analysis functions. The document also includes actual implementation examples and the effects of implementation, showcasing results such as reduced workload, enhanced analysis capabilities, and improved decision-making speed. Companies considering promoting DX in management or reviewing operations centered around Excel and spreadsheets are encouraged to take a look.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.