Introduction to materials summarizing methods to improve storage efficiency!

Let's review the unnecessary space and improve the storage efficiency of the warehouse.

Flat loss refers to the loss of storage space that occurs when items such as shelves and products are not appropriately placed in relation to the size of a factory or warehouse, or when the selection of loading equipment results in unnecessarily wide aisles. [Note] In such cases, there may be flat loss... - Products with different shipping frequencies are stored on the same shelf. - Racks suitable for the stored items are not installed, resulting in dead space. - Aisle widths are wider than necessary. Here are three solutions to address these issues! ■ Shuttle Runner - Automatically transports pallets between shelves, saving fork aisle space and converting it into storage space. - Can also reduce the workload of fork operators. ■ Roller Through Rack - Stores pallets by flowing them down inclined lanes, saving fork aisle space. - Maximizes limited storage space without power. ■ Drive-In Rack - Allows the use of wide pallets to utilize 80% of the warehouse as storage area. - Reduces aisle space and increases storage capacity! For more details, please download the respective catalogs or improvement materials.

• Shelves and racks
• Automated warehouse (AS, RS)

Extend the existing rack upwards! By utilizing the upper space, the storage rate is doubled, and with a high-rise picking cart, picking is easy, safe, and efficient!

Height loss refers to the loss that occurs when the vertical space, such as the upper part of a warehouse, is not utilized effectively. Do you have any of the following concerns in warehouse management? ● Increased storage items leading to insufficient space ● High costs for replacing racks to improve storage rates ● Worrying that utilizing upper space may reduce picking efficiency ● Few qualified personnel for high-level picking These issues can be resolved with JALOC's "TanaTSumU" and "High Pick Runner." ■ TanaTSumU A system that allows for the addition of racks above existing medium-duty racks, transforming them into high-rise racks. ■ High Pick Runner A cart that can rise 3.2 meters while carrying a person, allowing for direct picking of items placed on high-rise racks up to about 5 meters. By using TanaTSumU and High Pick Runner together, you can fully utilize the upper space of the warehouse, enhance storage efficiency, and conduct picking operations smoothly. For more details, please download the catalog or contact us.

• Terminal board/equipment storage rack
• Storage Container
• Shelves and racks

The width and shape of the storage shelves can be flexibly designed and laid out to suit your site! Why not make effective use of your storage space?

"Yamakake loss" refers to the wasted space that arises from not effectively utilizing the storage shelf space. For example, yamakake loss occurs when there are unnecessary gaps between products on the storage shelf or when long items are placed horizontally. ↓ Here are 3 recommended products to eliminate storage space loss ↓ ■ Pallet Rack - Load capacity per level ranges from 500Kg to 3000Kg - Width, depth, and height can be designed freely - Safety design with earthquake-resistant options ■ J Shelf - Lightweight and rust-free resin shelf rack - High recyclability using recycled PVC (vinyl resin) - Flexibly designed for weight and depth ■ Carton Box - Infinite shapes available, with hundreds of existing products - Can be manufactured in any shape to match product dimensions or module sizes - Essential for logistics improvement *For more details, please download the materials.

• Box Pallet
• Shelves and racks
• palette

■ FaceMe Security "Visitor Access Management" Key Features and Characteristics < Set Access Periods for Each Visitor > - Individual settings for the dates and times visitors can enter - Optimal access periods can be set according to the visitor's situation, whether for short visits or long stays. < Two Types of Authentication Methods to Accommodate Various Scenarios > ▶ Authentication via IP Camera - Enables authentication from a distance, achieving facial recognition without the need to disembark. ▶ Authentication via Facial Recognition Device (e.g., tablet) - Ideal for entry scenarios such as reception or security posts. Can be flexibly utilized depending on the installation location and operation. - Allows for on-the-spot registration of facial information using the device, enabling smooth responses to sudden visits or unexpected guests. < Real-Time Notifications Supporting Security and Reception Operations > - Real-time notifications of visitor and employee classifications, authorization expiration, and authentication status. - Prevents delays and oversights in verification, balancing the reduction of security staff workload with enhanced security. These features resolve issues arising from visual checks, logbooks, and IC card operations, simultaneously achieving enhanced security and improved efficiency in reception and security operations.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

A system for driver terminals has been realized through API integration, promoting the optimization of the delivery process and improvement of services to customers. Seino Information Service Co., Ltd. and Briskola Co., Ltd. announce that they have adopted Briskola's full lifecycle API management product "BAMs Series" for the construction of a system utilizing APIs and the management of API connections with various business applications for driver terminals, aimed at improving delivery efficiency and achieving digitalization of logistics for Seino Transportation Co., Ltd. and transportation groups nationwide. By implementing Briskola's "BAMs Series" for API management in the delivery management system constructed through API integration, we will focus on responding to the expected increase in the number of API calls due to the anticipated increase in terminal numbers, as well as ensuring stable system operation and preventive detection. This will lead to improved operational efficiency for drivers and the provision of high-quality services to customers sending and receiving packages.

In this case study, we have received cooperation from Obayashi Corporation and Sankyu Inc., leaders at the forefront of the construction and logistics industries, to introduce their specific initiatives regarding "early detection of heatstroke risk" and "ensuring worker safety." Additionally, we have published an interview article with Obayashi Corporation, who contributed to the development of "GenVital LTE," as a "development story." As heatstroke risk has become a social issue, we encourage everyone in companies working on improving on-site productivity and safety measures for workers to read this for insights. GRIFFY will continue to contribute to creating safer and more comfortable working environments through DX solutions, including "GenVital LTE." ◾️ Obayashi Corporation (case study) ◾️ Sankyu Inc. (case study) ◾️ Obayashi Corporation (development story) *Please check the link for more details on the article.

We conducted an RTK accuracy verification of the GNSS reference station (Hi-Target Vnet6plus receiver + choke ring antenna) installed at our company building. Generally, with a single-frequency GNSS, once the baseline length exceeds 10 km, it becomes impossible to consider the path through the ionosphere as the same, and the difference in ionospheric delay becomes a significant source of error. By using dual-frequency GNSS, it is possible to correct the delay based on the differences in delay caused by the frequency of the radio waves; however, it is still said to be effective only up to about 10 km. Why is that? We have published the verification results on our blog.