I started a YouTube channel called "Building a House I'm Glad I Built"!

Gentle to both people and the Earth! OM Solar harnesses the blessings of nature to create a comfortable living.

The "OM Quattro Solar" is a system that utilizes the heat and light of the sun to not only provide heating and hot water for your home but also generate electricity. By taking advantage of the property of solar panels that emit heat during electricity generation, the system can recover this heat for use in heating and hot water production. This heat utilization can help mitigate the decrease in power generation efficiency caused by the increase in temperature of the solar panels during operation. The solar panels use high-efficiency monocrystalline silicon. 【Features】 ■ Generates heat and electricity simultaneously ■ Touch panel remote control ■ Allows you to check temperature and power generation via the internet *For more details, please refer to the catalog or feel free to contact us.

• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)

Live by harnessing the blessings of nature! A solar thermal floor heating system that supports a comfortable lifestyle.

"OM Solar" is a solar thermal floor heating system designed in accordance with the laws of nature. In the cold winter, it utilizes solar heat for floor heating to create a comfortable thermal environment, and from spring to autumn, it generates hot water using solar heat. In summer, it expels warm air from the roof through the attic, and at night, it takes in cooled air by utilizing radiative cooling. This system helps create a comfortable living environment by integrating comprehensive ideas such as residential design, the way people perceive warmth, thermal environment design, air quality, living flow, and garden creation. 【Features】 ■ Purifies air while providing floor heating and ventilation simultaneously ■ Heats the entire indoor space with floor heating until the next morning ■ Produces approximately 300 liters of hot water per day ■ Introduces cooled air into the room through radiative cooling ■ Controlled by a touch panel remote *For more details, please refer to the catalog or feel free to contact us.

• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)

The installation is in one location in the attic! Electronic whole-house air purification unit exclusively for OMX/Passiv Aircon.

"OM e FILTER" is a built-in air purifier specifically designed for the whole-house air conditioning system "OMX" and "Passiv Aircon." It utilizes a "whole-house air conditioning system" that maintains the thermal environment of the entire home with just one unit, operating 24 hours a day, along with "duct pathways." It ensures that the air throughout the house is purified, capturing everything from mold, pollen, to PM2.5, providing "clean air." It also does not miss dust in corners of rooms or in hallways without equipment. [Features] - Installation in one location in the attic - Only one filter to maintain for the unit - Captures dust without fail - Dust collection power adopted by medical institutions - Airflow remains nearly unchanged, and costs are reasonable *For more details, please refer to the PDF materials or feel free to contact us.

• Ventilation system

Reduce "heat loss" due to ventilation! Introducing the Passiv Aircon dedicated total heat exchange ventilation system.

"PAtH" is a total heat exchange ventilation system that upgrades Passiv Aircon homes. By bringing in outside air closer to room temperature, it reduces "heat loss" due to ventilation. It ventilates while adjusting humidity to combat indoor dryness in winter and excess humidity during summer and rainy seasons. Additionally, it utilizes the ducts of Passiv Aircon, eliminating the need for double piping and allowing for a neat installation. 【Features】 ■ Reduces "heat loss" due to ventilation ■ Adjusts humidity while ventilating to combat indoor dryness in winter and excess humidity during summer and rainy seasons ■ Utilizes Passiv Aircon ducts ■ No need for double piping, allowing for a neat installation ■ Total heat exchange efficiency for temperature and humidity is 80% *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation system

Recommended for construction companies! Heating, cooling, hot water supply, and heat exchange ventilation all in one unit! Providing a customized thermal environment for each individual resident!

"OMX" is an indoor, outdoor, and hot water storage unit that features heating, cooling, hot water supply, and heat exchange ventilation, achieving an energy-efficient and comfortable thermal environment throughout the year, including underfloor heating. The hybrid system of solar energy (solar heat) and heat pumps reduces the initial installation costs for a warm winter and cool summer lifestyle, while also minimizing maintenance costs with minimal electricity usage. The system controls temperature changes that are favorable for living, providing a customized temperature environment for each resident, contributing to health and comfort. It also operates automatically in various modes depending on the season, weather, and time. [Main Automatic Operations] ■ Heating using solar heat ■ Heating utilizing heat pumps ■ Heat pump cooling and waste heat utilization for hot water supply ■ Heat exchange ventilation only *For more details, please refer to the PDF document or feel free to contact us.

• Unit Products
• Air conditioning equipment
• Heating and cooling equipment and facilities

In winter, heating is provided from under the floor, and in summer, cooling is provided from the ceiling, maintaining a comfortable indoor thermal environment year-round! Whole-house air conditioning and floor heating with a single air conditioner!

The "Passive Air Conditioner" creates a comfortable thermal environment without the discomfort of drafts or indoor temperature differences. Installed in the attic of a house that incorporates elements of passive design, it maintains a comfortable indoor thermal environment year-round by providing heating from the floor in winter and cooling from the ceiling in summer through ducting. By planning the architecture and air conditioning system as a single unit, both indoor and outdoor spaces are neatly integrated, and the hassle of daily maintenance is reduced to just one unit. This leads to a simpler and more comfortable way of living. 【Features】 ■ Insulation ■ Sunlight shading ■ Daylight utilization ■ Utilization of solar heat and natural wind ■ 24-hour operation to reduce temperature differences *For more details, please download the PDF or feel free to contact us.

• Heating and cooling equipment and facilities
• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Cooling system

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.