Free demo available: Fall detection device using non-contact sensors.

For the toilet, bath, and living room! This is a monitoring device that we definitely want to provide for elderly individuals living alone at home. Leaving them unattended after a long fall can lead to life-threatening situations.

It is a non-contact microwave. It will be installed on the ceiling. The fall detector "FM21 (Fall Monitor)" monitors the movements of elderly individuals every 5 seconds and promptly notifies relevant parties of any potential dangers. It can be used in facility restrooms as well as in home hallways, living rooms, and changing areas, and it can detect both leaving the toilet and falls with just one unit. Additionally, if a person remains in the restroom or bath beyond a set time without exiting, for example, if they have not exited for 30 minutes, it will report "danger in the restroom or bath." 【Features】 ■ Monitors danger occurrences in the office with sound and text display on the monitor, and similar notifications to staff smartphones. ■ Home elderly danger notifications: reports to external parties via smartphone, monitoring of cohabiting elderly individuals: inexpensive melody notifications for family members (can report from the 2nd and 3rd floors as well). ■ Compatible with nurse call systems; intercom available. *Other bed-exit mats are also available for sale. The particularly recommended bed-exit mat is the one designed to detect standing up from a wheelchair. *For more details, please download the PDF or contact us.

• Nursing care products

We will prevent falls and tumbles from the bed!

The "LEM Series" is a floor mat that detects actions such as stepping, sitting, and the back leaving the mat. All four types of mats predict the user's rising from bed and potential falls, notifying relevant parties. The two types of mats, the back mat and the edge sitting mat, help prevent falls from the bed. Please feel free to contact us if you have any requests. 【Features】 ■ Detection of falls and drops around the bed ■ Can be operated at a low cost ■ Can be linked with call switches and emergency buttons, etc. *For more details, please download the PDF or contact us.

• Nursing care products

Installed on the ceiling or wall, it quickly detects falls without contact! It alerts to danger when there is no exit after entering the toilet, bath, or living room beyond the set time.

The fall detection device "FM21 (Fall Monitor)" monitors the movements of elderly individuals at 5-second intervals and promptly notifies relevant parties of any potential dangers. It allows for flexible time settings and will report danger if there is no exit after the set time has elapsed since entry. It is widely installed in senior housing and nighttime care facilities! If danger is detected, it will display sound and messages on the computers or smartphones of the management office or staff room via Wi-Fi. *It can also be used with 4G/LTE even without a Wi-Fi environment. 【Features】 ■ Monitors danger occurrences in the office with sound and text display on the monitor, and similar notifications to staff smartphones. ■ Home elderly danger reporting: Notifications to external parties via smartphone, monitoring cohabiting elderly: Affordable melody notifications for family members (can notify from the 2nd or 3rd floor). ■ Compatible with nurse call systems; intercom available. ★ Free practical verification tests are also possible! ★ *For more details, please download the PDF or contact us.

• Nursing care products

It detects when you touch the bed railing and alerts you to potential dangers with a melody in advance. Easy to install and low cost! *Demo units available for loan.

The handrail mat "LEM103" is a type of sensor designed to be installed on the handrail of a bed. When the upper body is raised and the back is lifted from the bed, the sensor detects this and alerts with a melody to indicate danger. It is easy to install and has features that are not easily noticeable to the person being cared for. 【Features】 ■ Easy installation ■ Low-cost operation ■ Selectable notification methods ■ Bed exit and alarm functions ■ Can be linked with call switches and emergency buttons We also offer free demonstrations of the device. If you are interested, please feel free to contact us. *For more details, please download the PDF or contact us.

• Nursing care products

A call mat that detects movements such as getting off the bed, chair, or floor. It prevents dangers such as falls and tumbles in advance!

The call mat is a mat-type sensor. When you stand up from the bed, place your feet on the mat, and step on it, the sensor detects this and notifies the call system. It is simply placed on the floor, easy to install, and features low misrecognition due to being stepped on. 【Features】 ■ Easy installation ■ Can be operated at low cost ■ Selectable notification methods ■ Bed exit and alarm functions ■ Can be linked with call switches and emergency buttons We also offer free rental of demo units. If you are interested, please feel free to contact us. *For more details, please download the PDF or contact us.

• Nursing care products

Reducing the burden on caregivers! "Bed-exit mats" that help prevent falls and accidents around beds in elderly facilities and hospitals.

Even though it is absolutely dangerous, the reality is that facilities are struggling because they can no longer impose substantial restraints due to legal regulations. For monitoring patients who cannot be left unattended at all times, this is a sensor designed to observe them in a free environment rather than through physical restraints. It is a caregiving product used in nursing homes and similar facilities, specifically for warmly watching over individuals who cannot be fully independent, and it is an excellent item that can reduce the burden on caregivers. Please consider this opportunity. 【Features】 ■ Detection of falls and tumbles around the bed ■ Can be operated at low cost ■ Can be linked with call switches and emergency buttons, etc. *For more details, please download the PDF or contact us.

• Nursing care products

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI