【Emergency Leak Response】Absorbent material kit for acids, alkalis, solvents, and unidentified liquids.

The Pig Clear Spill Kit for liquid hazardous materials is a kit that includes absorbent materials capable of collecting approximately 18 liters of liquid in a transparent bag!

- The back is transparent, so the remaining amount is visible at a glance. - It comes with a convenient handle for portability. - It includes a handy disposal bag for temporarily storing used absorbent materials. - Its compact design takes up little space and can be placed inside vehicles such as trucks. 【Contents】 - Hazmat Pig Socks: 3 pieces - Hazmat Pig Mats: 12 pieces - Disposal Bags: 2 pieces 【Absorption Capacity】 Approximately 18.1 liters 【Bag Size】 Width 40.6 cm × Height 45.7 cm × Depth 14 cm

• Other store equipment and supplies
• Safety and consumables
• Environmental Survey

Are you prepared for a potential liquid leakage accident? This is a document summarizing the response manual for leakage countermeasures. We are also conducting our original leakage training!

We have summarized the procedures for preparing for a potential liquid leakage accident into seven steps. If an accident occurs and there is a lack of preparation, such as "no equipment to handle the leakage," "not knowing the handling procedures," or "not being aware of the risks involved in the handling work," there is a risk of secondary disasters. By preparing in advance, you can clarify what and how to use for handling when a leakage actually occurs. We will also introduce liquid leakage response kits that can be selected based on the type of liquid and the amount to be absorbed. 【Table of Contents】 ■ Steps 1 to 7 ■ Introduction of the "Liquid Leakage Response Kit" *If you are interested in "Leakage Response Training" or "Demonstrations," please feel free to contact us. *For more details, please contact us or refer to the PDF data.

• Cooking facility equipment and supplies
• Commercial kitchen
• Water Treatment

Special feature No. 7 on ISO 45001 clearly explains evaluation methods for OSHMS and provides examples of report writing after evaluation. Materials are also distributed for free!

Table of Contents 0. Introduction 1. Performance Evaluation Flow 2. Monitoring, Measurement, Analysis, and Performance Evaluation 3. Internal Audit 4. Management Review 5. Company Overview

• Building Cleaning Equipment
• Environmental Survey
• Water quality/pH measuring device

Over 200 types of products! Absorbents that keep factories clean and safe from leaks of oils and hazardous liquids.

The "Pig Comprehensive Catalog" is a comprehensive catalog from A.M. Products, which manufactures absorbent materials that contribute to creating a safe and clean environment in factories. Pig absorbents are easy to install and help keep the worksite clean, leading to reduced cleaning time and cleaning costs. We offer a range of absorbents tailored to various applications, including "Pig Tough Mat Green," which keeps walkways dry and clean, as well as absorbents for oil, liquids, and hazardous liquids.

• Safety and consumables
• Safety Supplies

A water-absorbent mat made from environmentally friendly, reusable recycled cellulose material for areas struggling with water!

This is a water absorption mat specifically designed to quickly and efficiently absorb large amounts of water in areas affected by leaks from rainwater or condensation from pipes and ducts. 【Product Details】 - After absorbing water, it can be wrung out and reused. - Made from environmentally friendly recycled cellulose material. - Each mat absorbs approximately 858mL of water. - Suitable for a wide range of applications, including flood prevention, leak prevention, and rain leak prevention.

• Other commercial buildings and service facilities

A clean, reusable, aesthetically pleasing water-specific sock-like absorbent material. It can be used to prevent water leaks and condensation from refrigerators, freezers, and cold cases.

- Made of polypropylene, it has the effect of suppressing mold growth, allowing for safe use over a long period. - By squeezing out the absorbed water and allowing it to air dry, it can be reused. Please avoid sun drying or using a dryer. Reuse is recommended up to three times. - Even after reuse, it maintains its shape well and is less prone to bacterial growth, which helps control odors. - It is flexible and fits well around the refrigerator and in corners. - The polypropylene cover is resistant to tearing and durable.

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• Other store equipment and supplies
• Refrigerated showcase

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI

This time, I would like to talk a little about current measurement in the switching evaluation of power semiconductors (including power devices and power modules).

From measurement instruments to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement instruments and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will announce surprise new products!

We have updated the article on the website of the semi-custom system construction "Select Beam." When planning factories, logistics warehouses, and stores, "system construction" has become an effective means of achieving cost reduction and shortening construction periods. The rationality of system construction through thorough standardization is very high, and it is adopted in many projects. However, due to the differing characteristics of each manufacturer, many business owners find themselves wondering, "Which manufacturer is suitable for our plans?" and "Is it really optimal compared to conventional methods?" In this article, we will compare and introduce the basic knowledge of the advantages and disadvantages of system construction, as well as recommend manufacturers by purpose in a ranking format. ■ Semi-Custom System Construction "Select Beam" This is a unique method by Sakura Structure, and it is a "third option" that is less expensive than system construction. It is the most suitable method for low-rise long-span buildings such as stores, warehouses, factories, and logistics facilities, as well as high-rise buildings like hotels.