We will be exhibiting at the exhibition!

Automatic measurement of the current state of slopes and landslides, as well as the condition of structures, using "points" and "surfaces." Achieving 24-hour automatic monitoring.

The 3D surface measurement system "DAMSYS-Hybrid" scans the measurement monitoring area with a Leica multi-station and visualizes the results on-site. It can simultaneously acquire data from both "points" through prism reflection and "surfaces" through 3D scanning, allowing for rapid understanding of unexpected behaviors. The behavior of slopes and ground can be managed in both the "vertical direction" and the "direction perpendicular to the slope's inclination," enabling automatic detection of displacements over a 24-hour period.

• Other measuring instruments

Improving safety during crane operations / Managing in a three-dimensional area to prevent intrusion into restricted zones and maintain distance from surroundings.

―Introduction to the Option System― 【On July 12, 2024, the MR visualization system for the option system has resumed sales!】 Using the technology of "GyroEye" developed by Informatics Co., Ltd.*, this system projects an area set with a "3D barrier" as a hologram in real size into the real world. 【Supported Devices】 Microsoft HoloLens 2, Trimble XR10 【Supported Data Formats】 DWG, DXF, IFC *To use this option system, registration for the dedicated app "GyroEye Web Data Converter," which converts CAD data into MR-compatible data, is required. *The 3D barrier and the WEB Data Converter have different coordinate systems, so they do not match perfectly. *There may be instances where it does not operate correctly due to weather conditions. *High-precision projection may not be possible depending on the site environment and weather conditions. *GyroEye is a registered trademark of Informatics Co., Ltd. *For more details on the MR visualization system, please refer to the catalog.

• Reinforced concrete construction
• Steel structure construction
• Bridge Construction

Visually manage the position and tilt of the piles to achieve high-precision pile driving. It can also be viewed remotely via a web browser.

"Pile Navi Cloud-V" is a system that enables high-precision pile driving construction while confirming the position and inclination of piles using a non-prism total station. When displaying the differences between design values and actual measurements, it can be checked on an in-vehicle monitor or a remote web browser (K-Cloud). Information such as the amount of deviation from the start to the end of measurement is automatically saved. It can be implemented according to site needs, such as with three-point heavy machinery or all-casing. 【Features】 ■ NETIS registered (Number: KT-220168-VE) ■ Compatible with precast piles and cast-in-place piles ■ Improved accuracy and safety through system management *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Earthworks

Are you struggling to explain "safety" to the client using just drawings? • The risks in blind spots are difficult to convey to the client through drawings alone. • Safety measures often become a target for cost reduction, making it hard to communicate their necessity. • There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are clear to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in those locations." It can be used directly as explanatory material for clients. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they are combined with rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

We will be exhibiting at the "JECA FAIR 2026 - 74th Electrical Industry Exhibition." Our company, a 110-year-old electrical materials manufacturer, operates under the motto "Turning desires into reality," providing various electrical materials and metal processing products. At our exhibition booth, you will be able to see not only pull boxes but also actual products such as conduit accessories, ducts, and supports. Additionally, we will hold seminars several times a day on strength calculations and seismic calculations. If you have concerns about whether your material selection is optimal, if the pricing is appropriate, or if it takes too long to receive calculation documents, please feel free to consult with us at our booth (3-39). Our experienced design staff will be available to speak with you directly! 【Main Exhibits】 ■ Seismic supports ■ Metal ducts ■ Accessories for conduits ■ Accessories for flexible conduits ■ Pull boxes ■ Support materials 【Exhibition Information】 Date: May 27 (Wednesday) - May 29 (Friday), 2026 Venue: Tokyo Big Sight, Halls 1, 2, 3, and 8