Currently offering a collection of image examples for Multi Truss A and B!

[Sales and Leasing] Since it can span large distances, a "temporary work passage" can be installed easily and at low cost!

In sites with a wide excavation area, the shortest approach to the office becomes a challenge. However, many may be troubled by the fact that systems like pedestrian bridges using H-shaped steel can become quite heavy, leading to a desire to establish a work passage more simply and at a lower cost. The large-span truss material "Multi Truss A" can span 20 meters depending on the design conditions, allowing for the easy installation of a "temporary work passage" by placing scaffold boards on top. This contributes to shortening the installation period and reducing costs, and we have received positive feedback from major general contractors on site. *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials
• Temporary Construction
• Renovation and repair methods

[Sales and Leasing] This is a box-type truss material suitable for large spans, usable for various applications such as "temporary roofs" and "temporary walkways" that are strong and durable.

Multi-Truss A is a box-type "long-span truss material" that can be easily assembled by simply joining dedicated joint plates with bolts and nuts. Depending on the design conditions, it can span up to 20 meters, making it widely used in large-scale repair and renovation projects that require large openings. Additionally, it has various applications and can be utilized as a "temporary walkway," "temporary roof," or "protective scaffolding" that is strong and suitable for long spans. Compared to traditional methods using heavy materials, it has fewer components and can be easily assembled, significantly contributing to cost reduction and shortening of construction periods. 【Features】 - It is widely adopted in "large-scale repair work" and "renovation work" where large openings of four spans or more are required, which cannot be achieved with beam frames. - It allows for easy assembly of strong "temporary walkways," "temporary roofs," "protective scaffolding," and "work stages" with long spans. - Simple assembly by just joining dedicated joint plates with bolts and nuts, contributing to cost reduction and shortening of construction periods. - Assembly and disassembly are performed at ground level, eliminating the risk of falls. *Case study materials are available! For more details, please download the PDF below.

• Temporary Construction
• Roof and gutter construction
• Renovation and repair methods

Lease: With a simple design that has a small number of parts, it can be easily assembled even for first-timers. It achieves excellent cost performance on sites with large spans.

Multi Truss B is a "joint-type truss material for large spans" that is used as a unit by inserting pins. Depending on the design conditions, it can span 25 meters, making it suitable for various applications such as "temporary roofs," "work stages," "mobile platforms," and "walkways" that require strength over large spans. It has been widely adopted for rain protection in renovation work for shrines, temples, and historical sites. The frame-type Multi Truss B is lightweight with fewer components, allowing for easy assembly, which contributes to reduced transportation costs and shortened construction periods. 【Features】 - Capable of accommodating various applications such as "temporary roofs," "temporary walkways," and "work stages" with strength over large spans. - Can be used as a unit simply by covering the ends of the upper and lower frame members with direct joints. - Fewer components and easy assembly contribute to shortened construction periods. *Case study materials are available! For more details, please download the PDF below.

• Temporary Construction Materials
• Roof and gutter construction
• Renovation and repair methods

【Lease】From single-pitched to gabled/hipped roofs, a joint-type large space work scaffold suitable for "temporary roofs and provisional roofs."

Multi Truss B is a joint-type truss material suitable for large spans, designed to be used as a unit by inserting pins for simple roofs and temporary roofs. Not only for "simple roofs and temporary roofs," but depending on the design conditions, it can span 25 meters, making it usable for various applications such as "work stages," "mobile platforms," and "walkways" that require strength over large spans. The frame-type Multi Truss B consists of lightweight components with a small number of parts, allowing for easy assembly, contributing to reduced transportation costs and shortened construction periods. 【Applications】 - All-weather simple roofs and temporary roofs (single slope, gable type) / gable type simple roofs, mountain type, circular type temporary roofs - Work scaffolding for ceilings, mobile platforms - Temporary walkways, bridges, temporary stages - Platforms for material storage *We are currently offering materials with case studies! Please download the PDF below.

• Scaffolding and Support Materials
• Temporary Construction
• Renovation and repair methods

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Our seminar, “Back-Office DX in the Era of Digital Salary Payments,” was featured on HAB News Squash (Hokuriku Asahi Broadcasting) This seminar was co-hosted by Kort Valuta Inc. and Schult Social Insurance & Labor Consultant Office, and was held on January 19, 2026, for companies based in Ishikawa Prefecture https://www.hab.co.jp/news/article/202601217724.php As cashless payments continue to expand, digital salary payments are gaining attention across Japan. The coverage highlights current challenges faced by regional SMEs, including limited information and know-how, as well as key considerations and benefits for implementation. ▶️The seminar video featured in the news is now available on YouTube https://www.youtube.com/watch?v=GlHcFSTrFHM

Our company will release the 10.1-inch Windows tablet "TW2A-NF9LTA" equipped with an NFC reader/writer in March 2026. This product is a business-oriented model that comes standard with a dedicated OS for specific applications, "Windows 11 IoT Enterprise LTSC 2024 (64bit)," which enables long-term stable operation. With the built-in NFC reader, users can simply hold their IC cards, including My Number cards (and My Number health insurance cards), for identity verification without the need for an external card reader. It supports a wide range of business scenarios utilizing NFC, such as access control, attendance management, and cashless payment terminals in restaurants. Additionally, as a tablet for business use, it is equipped with features and specifications that are in high demand during operation. It includes our original business efficiency app "NFC Optimizer for Windows," our proprietary "Battery Protection Mode" for safe operation during AC constant power supply, and a feature that allows the product's power to be turned ON/OFF in conjunction with the power breaker, all achievable without incurring development costs for dedicated software, only requiring costs for the kitting process.

We will introduce the ultrasonic microscopy observation of semiconductor packages that we conduct. Due to storage conditions and mounting conditions, delamination may occur between the metal parts (die pad) and the package resin in semiconductor packages. Delamination inside the package is a defect that significantly affects product quality, but it cannot be detected from the appearance. By using ultrasonic microscopy, we can clearly capture the internal structure of the package and contribute to reliability evaluation.

Here is an example of observing the adhesive condition through a metal plate using an ultrasonic microscope. An ultrasonic microscope can confirm internal information that cannot be seen from the outside, as long as the ultrasonic waves can pass through. We observed the condition of the adhesive remaining on the metal plate from the metal side in a sample where the chip came off after reliability testing. Please refer to the PDF document for details and results of the observation.