【Emergency Leak Response】Absorbent material kit for acids, alkalis, solvents, and unidentified liquids.

The Pig Clear Spill Kit for liquid hazardous materials is a kit that includes absorbent materials capable of collecting approximately 18 liters of liquid in a transparent bag!

- The back is transparent, so the remaining amount is visible at a glance. - It comes with a convenient handle for portability. - It includes a handy disposal bag for temporarily storing used absorbent materials. - Its compact design takes up little space and can be placed inside vehicles such as trucks. 【Contents】 - Hazmat Pig Socks: 3 pieces - Hazmat Pig Mats: 12 pieces - Disposal Bags: 2 pieces 【Absorption Capacity】 Approximately 18.1 liters 【Bag Size】 Width 40.6 cm × Height 45.7 cm × Depth 14 cm

• Other store equipment and supplies
• Safety and consumables
• Environmental Survey

Are you prepared for a potential liquid leakage accident? This is a document summarizing the response manual for leakage countermeasures. We are also conducting our original leakage training!

We have summarized the procedures for preparing for a potential liquid leakage accident into seven steps. If an accident occurs and there is a lack of preparation, such as "no equipment to handle the leakage," "not knowing the handling procedures," or "not being aware of the risks involved in the handling work," there is a risk of secondary disasters. By preparing in advance, you can clarify what and how to use for handling when a leakage actually occurs. We will also introduce liquid leakage response kits that can be selected based on the type of liquid and the amount to be absorbed. 【Table of Contents】 ■ Steps 1 to 7 ■ Introduction of the "Liquid Leakage Response Kit" *If you are interested in "Leakage Response Training" or "Demonstrations," please feel free to contact us. *For more details, please contact us or refer to the PDF data.

• Cooking facility equipment and supplies
• Commercial kitchen
• Water Treatment

Special feature No. 7 on ISO 45001 clearly explains evaluation methods for OSHMS and provides examples of report writing after evaluation. Materials are also distributed for free!

Table of Contents 0. Introduction 1. Performance Evaluation Flow 2. Monitoring, Measurement, Analysis, and Performance Evaluation 3. Internal Audit 4. Management Review 5. Company Overview

• Building Cleaning Equipment
• Environmental Survey
• Water quality/pH measuring device

Over 200 types of products! Absorbents that keep factories clean and safe from leaks of oils and hazardous liquids.

The "Pig Comprehensive Catalog" is a comprehensive catalog from A.M. Products, which manufactures absorbent materials that contribute to creating a safe and clean environment in factories. Pig absorbents are easy to install and help keep the worksite clean, leading to reduced cleaning time and cleaning costs. We offer a range of absorbents tailored to various applications, including "Pig Tough Mat Green," which keeps walkways dry and clean, as well as absorbents for oil, liquids, and hazardous liquids.

• Safety and consumables
• Safety Supplies

A water-absorbent mat made from environmentally friendly, reusable recycled cellulose material for areas struggling with water!

This is a water absorption mat specifically designed to quickly and efficiently absorb large amounts of water in areas affected by leaks from rainwater or condensation from pipes and ducts. 【Product Details】 - After absorbing water, it can be wrung out and reused. - Made from environmentally friendly recycled cellulose material. - Each mat absorbs approximately 858mL of water. - Suitable for a wide range of applications, including flood prevention, leak prevention, and rain leak prevention.

• Other commercial buildings and service facilities

A clean, reusable, aesthetically pleasing water-specific sock-like absorbent material. It can be used to prevent water leaks and condensation from refrigerators, freezers, and cold cases.

- Made of polypropylene, it has the effect of suppressing mold growth, allowing for safe use over a long period. - By squeezing out the absorbed water and allowing it to air dry, it can be reused. Please avoid sun drying or using a dryer. Reuse is recommended up to three times. - Even after reuse, it maintains its shape well and is less prone to bacterial growth, which helps control odors. - It is flexible and fits well around the refrigerator and in corners. - The polypropylene cover is resistant to tearing and durable.

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• Other store equipment and supplies
• Refrigerated showcase

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.