Video on advice points for electronic component sample preparation is now available.

Introducing our lineup of cutting machines, embedding machines, polishing machines, and hardness testing machines.

For more details, please check the PDF document.

• Other measuring instruments

Intelligent interface! Supporting customers who produce a large number of samples!

The automatic grinding machine "Automet Series" is a high-performance device designed with reliability, flexibility, and operability in mind. The programming features available in the professional model contribute to more reproducible results and support customers who produce large quantities of samples. Additionally, the robust cast aluminum base provides durability to maintain a long lifespan and minimizes vibrations. 【Features】 ■ Enables reproducible sample preparation ■ By setting the movement amount of the Z-axis, the grinding amount of the sample can be automatically controlled ■ Prevents contamination using the new rinse and spin function ■ Reduces cleaning time for the bowl with disposable bowl liners ■ Allows for proper cleaning of the entire bowl with an extendable water supply hose *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

Achieves excellent pore impregnation in an easy-to-use and compact form.

The SimpliBack process is optimized for room temperature curing embedding. ■ Programmable. You can set the vacuum level, time in a vacuum state, and the number of cycles in a vacuum state. ■ Intuitive interface ■ Large sample chamber increases processing capacity, allowing for the analysis of more samples than ever before. ■ Easy to clean

• Non-destructive testing
• Other analytical equipment

A simple operating system! Providing a precise sectioning tool that can cut various materials.

The "IsoMet Low Speed" is a precision cutting machine designed to cut various types of materials with minimal deformation (strain). It possesses excellent versatility with low cross-flow capability and the ability to accommodate a wide range of sample shapes and configurations. As a result, it provides a precise sectioning tool capable of cutting various materials, including brittle or ductile metals, composites, cement, laminates, plastics, electronic devices, and biomaterials. 【Features】 ■ Achieves high surface quality with reproducibility ■ Accommodates various sizes and shapes with a wide selection of sample chucks ■ Allows for quick and easy setup ■ Cuts consistently at accurate positions ■ Motor speed can be adjusted between 0 to 300 rpm ■ Compatible with various diamond (HC, LC) and CBN blades in sizes of 3in, 4in, and 5in *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

Designed for high-volume embedding! Tested under harsh conditions, assuming the working environment of a busy lab.

The "Simplimet 4000" is a high-speed embedding machine with high reliability in continuous operation environments. Designed for use in 24/7 operating environments with regular maintenance, it prevents unexpected downtime through a robust and experience-based preventive maintenance program. Additionally, this compact product, with a width of 311mm, allows for the installation of consumables and multiple embedding machines, accommodating future expansions. 【Features】 ■ Excellent durability and high reliability in continuous operation environments ■ Reduces unexpected failures ■ User-friendly operation. Necessary items are all on the front panel, eliminating complicated settings. ■ The status bar and countdown timer at the bottom allow for quick visual understanding of the embedding status. ■ Compact size fits in narrow labs. ■ Smart Cool system saves time and water while ensuring safety. ■ Innovative mold design enables rapid temperature rise.

• Other analytical equipment

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On June 4, 2026, we published a page titled "Do We Set 'Forecasts' Too Optimistically Compared to Reality? The 'Planning Fallacy'." The 'Planning Fallacy' refers to the psychological phenomenon of underestimating the time, costs, and risks involved in carrying out tasks while overestimating the benefits. The page explains examples of its occurrence, the factors that lead to it, and methods to overcome it. (Page Overview: Excerpts) ■ What is the 'Planning Fallacy'? ■ Examples of the 'Planning Fallacy' ■ Why does the 'Planning Fallacy' occur? ■ How to overcome the 'Planning Fallacy'? (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/planning-fallacy-2026-06/

Kort Valuta has released a workplace initiative model that leverages points exchangeable for electronic money to support the adoption of safety and wellness habits. Examples include: ・Hydration reporting ・Viewing heatstroke prevention content ・Pre-shift condition checks ・Voice-based condition checks By linking these activities to incentive points, organizations can encourage voluntary participation while supporting workplace safety and employee well-being. The model is designed not only for frontline environments such as: ・Logistics ・Construction ・Manufacturing but also for office-based health and well-being programs. Safety posters and reminders alone are often not enough to drive lasting behavioral change. We hope this initiative provides a practical example for organizations seeking new approaches to workplace safety and employee engagement. Read the full press release: https://prtimes.jp/main/html/rd/p/000000118.000076589.html #HeatstrokePrevention #WorkplaceSafety #EmployeeWellbeing #HealthManagement #OccupationalHealth #HR #Logistics #Construction #Manufacturing #TwooCa

Our company will be presenting at the "On-Site Made Easy! Latest Technology Seminar Vol. 20" (organized by Shinken Shimbunsha)! Kinos Logic will be speaking in Session 3 (15:50 - 17:00). We will provide a clear explanation of the tool "Seigou Navi," which can streamline the review of civil engineering drawings on a PC, using real-life examples. ■ Event Overview Date and Time: June 30, 2026 (Friday) 13:00 - 17:00 *Entry starts at 12:30 Format: Zoom (online broadcast) Capacity: 300 participants for the Zoom live broadcast Participation Fee: Free (Note: Additional fees for continuing education unit application services, etc.) Application Deadline: June 26 (Friday) 17:00 Organizer: Shinken Shimbunsha