Notice of advertisement publication in the Nikkan Kogyo Shimbun "Shiga/Hikone Valve Special Feature" April 27, 2023 issue.

For applying oil and adhesive! Also for filling varnish and grease!

*When using adhesive, only those that do not damage the material are allowed. For details, please contact us.* APP-C1-AL (for oil) APP-C1-SUS (for solvents) ◎ The discharge pipe has a large diameter to accommodate high-viscosity oils and solvents. ◎ Grease up to #3 consistency can be discharged. ◎ The suction pipe has been modified in two places for efficient discharge when switching between closed cans, etc. ◎ Can be shared with pails and drums of different diameters. *Benefits* ■ Capable of discharging high-viscosity liquids (below 10,000 cP). ■ The spring mechanism allows the pipe to reach the bottom of the can, minimizing residual liquid. ■ Can transfer to high places or long distances under high pressure. *Features* ■ Sealed pressurized and discharge-only system. ■ Entirely pressurizes one-gallon cans or pails. ■ Continuous operation is possible. ■ Lifting capacity of 30m. ■ Usable with air compressors of 1 horsepower (0.75 kW) or more.

• pump

Non-sticky! Refreshing and smooth mist. Ideal mist fan for heatstroke and static electricity prevention in areas where open flames are prohibited.

**Merits** ■ Maximum cooling of minus 8 degrees (−8℃) improves work efficiency in high-temperature and high-humidity environments ■ Continuous operation possible ■ Safe to use in explosion-proof areas as the power source is air ■ High water-saving function allows for usage while conserving water ■ By adjusting the valve opening, approximately 8 hours of operation can be achieved with 1 liter **Features** ■ Dedicated container included as a substitute for the tank ■ Compatible with large 10-liter water tanks and servers ■ Circulator and oscillating function enable wide-area cooling, ventilation, and air blowing ■ Mist and airflow adjustment with a needle valve ■ Two types available, 18 type and 24 type, selectable according to the "site" and "application"

• Mist Generator

Stylish and compact! The latest model that maximizes usability.

《Manual Gun Nozzle Series》 GN1-POM20 / GN1-POM25 (for AdBlue) Compatible with water, water-soluble liquids (neutral), kerosene, and diesel. 《Benefits》 A manual gun nozzle featuring a lightweight and compact universal design. Its simple structure and maximum durability make it resistant to malfunctions. Based on customer feedback, it has been thoroughly refined to be the optimal specification for transferring AdBlue. 《Features》 ● Significantly increased durability ● Easy-to-handle stylish straight grip ● Shape that minimizes interference with the water tank

• Rainwater tank

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

The comprehensive catalog "General Catalog J-02" for the 2023 fiscal year has been completed. This comprehensive catalog features many Joe Prince products primarily used in industrial equipment and facilities. Please make use of it.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.