Introducing one-point advice for sample preparation.

Final finishing dedicated polishing machine. Compatible with large samples using a 12-inch polishing bowl.

Vibromet 2 can eliminate the slight tissue alteration that occurs during sample preparation without using hazardous chemicals required for electrolytic polishing, exposing the material's original structure on the analysis surface. ■ No worry about distorting the sample surface. It finishes the surface suitable for AFM and EBSD analysis. ■ Does not use hazardous chemicals. ■ No adjustments needed during polishing.

• Other analytical equipment

Achieves excellent pore impregnation in an easy-to-use and compact form.

The SimpliBack process is optimized for room temperature curing embedding. ■ Programmable. You can set the vacuum level, time in a vacuum state, and the number of cycles in a vacuum state. ■ Intuitive interface ■ Large sample chamber increases processing capacity, allowing for the analysis of more samples than ever before. ■ Easy to clean

• Non-destructive testing
• Other analytical equipment

A simple operating system! Providing a precise sectioning tool that can cut various materials.

The "IsoMet Low Speed" is a precision cutting machine designed to cut various types of materials with minimal deformation (strain). It possesses excellent versatility with low cross-flow capability and the ability to accommodate a wide range of sample shapes and configurations. As a result, it provides a precise sectioning tool capable of cutting various materials, including brittle or ductile metals, composites, cement, laminates, plastics, electronic devices, and biomaterials. 【Features】 ■ Achieves high surface quality with reproducibility ■ Accommodates various sizes and shapes with a wide selection of sample chucks ■ Allows for quick and easy setup ■ Cuts consistently at accurate positions ■ Motor speed can be adjusted between 0 to 300 rpm ■ Compatible with various diamond (HC, LC) and CBN blades in sizes of 3in, 4in, and 5in *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

Designed for high-volume embedding! Tested under harsh conditions, assuming the working environment of a busy lab.

The "Simplimet 4000" is a high-speed embedding machine with high reliability in continuous operation environments. Designed for use in 24/7 operating environments with regular maintenance, it prevents unexpected downtime through a robust and experience-based preventive maintenance program. Additionally, this compact product, with a width of 311mm, allows for the installation of consumables and multiple embedding machines, accommodating future expansions. 【Features】 ■ Excellent durability and high reliability in continuous operation environments ■ Reduces unexpected failures ■ User-friendly operation. Necessary items are all on the front panel, eliminating complicated settings. ■ The status bar and countdown timer at the bottom allow for quick visual understanding of the embedding status. ■ Compact size fits in narrow labs. ■ Smart Cool system saves time and water while ensuring safety. ■ Innovative mold design enables rapid temperature rise.

• Other analytical equipment

By adjusting with a 3-axis blade movement and a vice that does not require tools, quick cutting setup is possible!

The "Isomet High Speed" is a tabletop precision cutting machine that can efficiently and accurately cut various materials. Thanks to its innovative machine and vice design, it allows for quick and easy setting of the cutting position using precision lasers. Additionally, it employs an automatic dressing system to extend blade life and optimize cutting quality. 【Features】 ■ High-performance machine focused on efficiency, consistency, and precision ■ Equipped with a powerful 2kW blade motor output ■ Minimizes distortion of the sample surface caused by the blade ■ Reduces cutting time without affecting surface quality ■ Simple user interface ■ Adjusts cutting speed in real-time while maintaining powerful cutting efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

Simplifying the grinding process! We provide robustness and stability with a durable die-cast body.

The "Ecomet 30" is a grinding machine designed for busy laboratory environments. It features a comfortable splash guard design, allowing for easy control of the device while holding samples. The automatic machine simplifies operation by placing all commonly used functions on the front screen with an easy-to-use touchscreen interface, eliminating the need for complex menus. Additionally, it has a convenient cleaning function for easy maintenance. 【Features】 ■ Simplifies daily grinding tasks ■ Comfortable splash guard design ■ Easy control of the device while holding samples ■ User-friendly touchscreen interface for the automatic machine ■ Convenient cleaning function for easy maintenance ■ Durable die-cast body provides robustness and stability *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

For demanding environments! 10-inch (254mm) / 12-inch (305mm) medium-sized manual abrasive cutting machine.

The "Abrashimet M" is a medium-sized manual abrasive cutting machine that achieves consistent and reproducible cutting quality for medium-sized samples. With excellent operability and durability, and a spacious chamber, this device is ideal for quick and easy cutting in demanding environments. Additionally, it introduces a new abrasive cutting feature that allows for parallel dual-blade cutting, enabling two parallel cuts in a single cycle. 【Features】 ■ Cuts large and high-strength materials with a 5.5hp (4kW) motor ■ Accommodates samples up to 25 inches (635mm) wide in a spacious chamber ■ Large-capacity recirculation system for easy daily maintenance ■ Efficient and powerful motor with high functionality allows for reproducible cutting ■ Achieves consistent and reproducible cutting quality for medium-sized samples *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

The seismic sensor device "HK-2" detects strong tremors equivalent to a seismic intensity of 5 or higher, transmits a signal to the control room, and emergency stops the facility equipment. 【Installation Location】 Automotive parts factory 【Challenges】 Due to the maintenance and replacement of the factory equipment control devices, we considered updating the existing seismic sensors as well, but since production had already ended, we were looking for alternatives. 【Effects After Installation】 The HK-2 has the function to emergency stop equipment during an earthquake, and since its functionality is the same as the existing device, it was introduced as a replacement. Its compact size also allowed it to fit within the existing control panel being used. ★See more examples of the seismic sensor device "HK-2" https://www.hotron.co.jp/recommend/HK-2_lp.html#anchor_a04 ◎For more details, please download the materials or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We have renewed our brochure regarding "Soil Contamination Investigation and Measures." Soil contamination investigation and measures require complex and specialized knowledge, including legal regulations, investigation obligations, and countermeasure methods. In this brochure, we have systematically organized the overview of legal regulations and various countermeasures to make it easier for those unfamiliar with the Soil Contamination Countermeasures Act and the Water Pollution Prevention Act to understand. Additionally, we have included a flowchart indicating "when soil investigation is necessary," allowing businesses to grasp the relevant situations for themselves. By clarifying "what needs to be done now," we support decision-making for companies engaged in environmental risk management. The structure is designed to be easy to understand even for those encountering the Soil Contamination Countermeasures Act for the first time, so please take a look. For more details, please refer to the news page on our company website linked in the related links section. 【Contact Information】 Mitsubishi Material Tech Corporation, Sales Planning Department (Weekdays 9 AM - 5 PM) 03-6628-6905 or contact form

"This company has a nice atmosphere..." The reason might be the "scent" of the space. Why scent in the office now? Just by introducing scent, the quality of the office dramatically improves. 1. Visitor Reception: Enhancing the Quality of Hospitality Just having a pleasant scent wafting through the entrance and reception room gives visitors a positive first impression of a company that pays attention to detail. 2. Increased Concentration: Towards a More Productive Workplace Scent directly brings relaxation and refreshment effects to the brain. It supports mood changes during work breaks and helps maintain concentration during long hours of desk work, leading to improved employee performance. 3. Enhanced Corporate Image (Branding) The memory of "that office always has a nice scent" quietly and surely enhances the company's brand image. It becomes a powerful tool for differentiating from other companies. Start with a "Free Trial Installation" If you want to improve the atmosphere of your office and create a more comfortable working environment for your employees, why not try the power of scent? Please feel free to contact us.