Announcement of Participation in the "2023 Yokohama International Automobile Technology Exhibition"

[Free Sample Available] A heating material made by turning a new carbon nanotube (CNT) material into a paint and applying a thin film coating.

Unlike planar heating elements made of metallic materials such as nichrome wire, this is a material that heats uniformly across its entire surface. HEATNEX utilizes CNT as a resistive element and prints it onto a film, achieving a flexible heating material. By adjusting the transparency, it can be made close to transparent and can also accommodate specifications that allow light to pass through. 【Features】 ■ A flexible heating material that can heat uniformly across its entire surface. ■ Efficient heating through heat conduction and far-infrared radiation. ■ Excellent thermal conductivity and thermal radiation, allowing for instant heating and heat dissipation. ■ It is possible to create a lightweight planar heating element by forming electrodes with conductive paste, etc. ■ Capable of emitting approximately five times more far-infrared radiation than metallic heating elements. *Evaluation results are based on internal comparisons. 【Newly Developed Products】 High-Temperature Compatible Products - Heat Resistance: 200℃ (Standard Product: 80℃) Using polyimide as the substrate allows for heating at higher temperatures compared to standard products. Low-Voltage Compatible Products - Heat Resistance: 80℃ - Surface Resistivity: 30Ω/□ (Standard Product: 150Ω/□) Can be used at low voltage, making it widely applicable. *For more details, please download the materials or contact us.

• others

[New Product] Ideal Isert for Reinforcing Female Threads in Resin Base Materials!

This is an insert nut suitable for reinforcing the internal threads of resin substrates. It has a self-tapping feature, eliminating the need for tapping and providing excellent workability. There are stop holes at both ends, allowing for insertion from either direction without any orientation. Additionally, the chips generated during insertion are completely collected by the stop holes, so there is no need for removal. It has threads on the inner diameter side, making it ideal for reinforcing the threads of substrates with low strength.

• others

Certified by the Japan Architecture Center! Just attach it to the installed nut to effectively prevent loosening and falling off of bolts and nuts!

It is significantly more effective than double nut anti-loosening measures and can reduce maintenance inspection processes. It also contributes to approximately 40% weight reduction. It can be easily installed using commercially available socket wrenches. It has passed tests using an impact-type vibration testing machine compliant with NAS3350 standards. The sizes range from M4 to M24. 【Product Features】 ○ Compliant product evaluated by the Japan Building Center (BCJ evaluation - LS0107-01, applicable to M12). ○ The anti-loosening performance of LockOne has been proven in tests using an impact-type vibration testing machine compliant with NAS3350 standards. ○ Available in sizes from M4 to M24. ○ Can be installed with a commercially available 12-point socket wrench. ◎ For more details, please download the catalog or contact us.

• Fastening hardware
• Interior and exterior construction accessories
• Work tools

Significantly reduce work time by one-third without removing the tang. Trial kits are also available in the lineup.

The "Tangless Insert" is a female thread reinforcement material that can be inserted without a tang using a special tool. Since the insert has no directional orientation, it can be inserted from either side. There is no need to break off or search for the tang after insertion, which reduces the working time by about one-third compared to conventional products, thereby improving work efficiency. 【Features】 ■ No specialized skills required. Anyone can easily perform the task. ■ Minimally damages the female thread during extraction. ■ Both manual and automatic extraction of the insert are possible. ■ A kit that includes manual insertion tools, drills, and taps is also available (three products: M4/M5/M6). *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

Achieve cost reduction and weight reduction! With deep drawing processing, a production efficiency increase of up to 4 times is possible.

We propose value-added (VA) solutions by transitioning our products, which were traditionally processed through cutting and pipe processing, to deep drawing processing. By switching from cutting processes, we achieve not only cost reduction but also weight reduction. Furthermore, by transitioning from pipe processing, we also achieve high precision. At Advanex, we can accommodate various shapes through our unique manufacturing methods. Please refer to the attached photos for the shapes. 【Bulge Processing】 [Points] - Capable of processing bulge shapes in the middle section of tubular products. - Unlike conventional bulge forming processes, we can create bulge shapes in the product's middle section using only molds. 【Giboshi Processing】 [Points] - Capable of processing with a necked shape (giboshi shape) at the tip. - By adding a neck to the product's tip, we can enhance the pull-out strength against vibrations. - Since deep-drawn products are processed with giboshi, there are no seams in the product. 【Irregular Drawing】 [Points] - Through transfer drawing, integrated forming from blanking to irregular drawing can be achieved within a single mold. - Complex irregular shapes can also be formed within the mold. For more details, please contact us or download the catalog.

• others

It is achieved by insert molding high-precision products that are difficult to handle with assembly processes such as press fitting and welding.

At Advanex, we are equipped with all technologies from press processing to injection molding, and we carry out production on a consistent line. We have injection molding machines ranging from 40 to 100 tons, capable of processing products from very small to medium-sized. We can design and manufacture everything in-house, from press molds to injection molds and automatic machines. This allows us to aim for reduced assembly man-hours, miniaturization, thinness, and high precision, while also proposing the best component designs for our customers. Additionally, we can accommodate insert molding in the Dongguan area of China.

• others

We can accommodate from "micro springs" with a wire diameter of Φ15 microns to "precision springs" of Φ4.0 millimeters.

Please feel free to consult us from the design stage. We will provide proposals tailored to your needs, including calculations for durability performance, considerations for manufacturability, integration of multiple parts into a single component, and introductions to new materials. We offer support for design, prototyping, and mass production in Japan, as well as overseas mass production in countries such as China, Vietnam, and Thailand.

• others

By equipping both multi-forming machines and press machines, various processes are possible, including complex shapes and cost-effective material processing.

At Advanex, we possess a wide variety of equipment, including our own multi-forming machines, general-purpose press machines, high-speed press machines, 250t link press machines, and NC machines. We can produce precision springs with thicknesses ranging from 30 microns to approximately 2.0 millimeters, not only domestically but also in overseas locations such as China and Thailand.

• others

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room No. 12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities prepared. We look forward to welcoming everyone!

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools