Announcement of the release of the flyer for the new product "Air Pressure Pump New Series."

For transferring high-viscosity liquids in large volumes for solvents, acids, and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary specifications with hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Not compliant with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drum, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• pump

Suitable for large-volume transfer of high-viscosity liquids and can be disassembled for cleaning.

"APDS Series - Discharge Only" APDS-32 (for oil) APDS-25 (32) SUS (for solvents, acids, and alkalis) APDS-1 (1.5)s (sanitary model / hygienic fitting specification) APDS-25PP (for acids and alkalis) ◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate ◎ Can be used for both discharge and suction "Benefits" ● Minimal residual liquid (about 200cc), efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable with small amounts of foreign matter ● Continuous operation possible ● Easy to clean due to a structure that allows for disassembly and cleaning ● Available in sanitary hygienic fitting specifications ● Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) * Not applicable under the Food Sanitation Act. "Features" ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Discharge only with pressurized drum, recovery not possible ● Double pressure reduction with regulator and safety valve for safety ● Pressure section (G3/4) and discharge section (G2) are separated

• pump

For transferring high-viscosity liquids in large volumes for acids and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available with sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• pump

[Sanitary Product / Heller Joint Specification] For the large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record for food use (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• pump

For oil use: Large capacity transfer of high-viscosity liquids; disassembly and cleaning possible.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with a regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not allowed.

• pump

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), capable of efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meters and gun nozzles are not compatible with foreign matter contamination.

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced-pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

Pump for transferring kerosene, light oil, and gasoline using compressed air to utilize internal pressure! Minimizes residual liquid, energy-saving, and safely allows for small portions of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

Pump for transferring using internal pressure with compressed air, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with a regulator and safety valve for peace of mind ● Equipped with an earth wire for static electricity measures (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. * Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

A pump that uses compressed air to utilize internal pressure for transfer! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), capable of waste-free discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Designed for discharge only with sealed pressurized drum, not for recovery ● Double pressure reduction with regulator and safety valve for added safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Air Pressure Pump Mechanism≫ This pump introduces reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle versions do not allow for foreign matter contamination.

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dividing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series - Discharge Only" APD-25 (for oil) APD-25N (for oil / with gun nozzle) APD-25G (for kerosene, light oil, gasoline) APD-25GN (for kerosene, light oil, gasoline / with gun nozzle) APD-25AS (for solvents) APD-25ASN (for solvents / with gun nozzle) APD-25GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Pressure-fed discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types)

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dispensing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series Discharge Only" APD-20 (for oil) APD-20N (for oil / with gun nozzle) APD-20G (for kerosene, light oil, gasoline) APD-20GN (for kerosene, light oil, gasoline / with gun nozzle) APD-20AS (for solvents) APD-20ASN (for solvents / with gun nozzle) APD-20SUS (for solvents) APD-20SUSN (for solvents / with gun nozzle) APD-20GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (about 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum type for discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, and SUS types)

• pump

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

As the new year begins, I would like to extend my heartfelt congratulations on your continued prosperity. I sincerely appreciate your exceptional support throughout the year. This is the STJ Group (Santec Telecom Japan, STJ Rentec). Now, I am pleased to announce that we will be opening our "Transceiver & Smartphone Rental Shop" simultaneously at three locations nationwide on January 26 (Monday)! ■ List of Services to be Offered - Same-day pickup/return of rental equipment - Usage explanations and demonstrations of rental equipment - Wireless solution consultation desk - Mobile BPO service counter As a special promotion to celebrate the opening of the rental shop, we are currently running a special price campaign for rental equipment pickup at the shop! For more details, please contact us!

This is the Agricultural Division of Sumitomo Forestry Greenery Co., Ltd. In our division, we manufacture and sell potting soil for agricultural, horticultural, and greening purposes. In the future, we would like to regularly introduce our products through the Nōsan Girl Letter.

We would like to inform you about our participation in the IT Trend EXPO 2026 Spring. 《Exhibition Information》 With the concept of "New encounters will change the way we work tomorrow," one of the largest online exhibitions in the industry will be held. NTT TechnoCross will be exhibiting in the Human Resources Comprehensive category. We have prepared numerous discussions and sessions featuring special guests who are active on television, allowing even those who are usually busy to efficiently gather information on products and services related to IT and DX. Additionally, the first 10,000 participants will receive a 500 yen Amazon gift card. Please be sure to register early. 《Exhibition Overview》 March 3 (Tuesday) to March 7 (Saturday), 2026, online (free: pre-registration required) 《Participation Registration》 https://it.expo.it-trend.jp/key/opl7kgdj *Please register (free) by clicking "Receive Ticket / Proceed to Participation Registration" at the above URL.