We have opened a hardware e-commerce site "Pittari Kanamono" where you can find both niche products and standard items!

For metal processing and stainless steel processing, please leave it to us.

Our company specializes in the manufacturing and shaping of metal processing/stainless steel products. We have received requests from a wide range of customers, including public facilities, commercial stores, factories, and residences, and have produced over 80,000 custom-made and small-lot orders. Additionally, we can accommodate custom-made and small-lot requests starting from one piece. We also accept repairs and remanufacturing of other companies' products. Please feel free to contact us. 【Product Lineup】 ■ Handrails - Handrails for ramps, handrails for stairs, handrails for balconies, etc. ■ Sinks - Undermount sinks, overmount sinks, etc. ■ Ladders - Straight ladders, square-shaped ladders, R-shaped ladders ■ Stands and Frames - Stands, frames, structures, and substructures, etc. *For more details, please download the PDF or contact us.

• Other fittings

Our best product for September is the two-layer corner sink.

We received a request from a customer for a sink that fits perfectly into the dead space in their kitchen, and we handled everything from design to production. The customer wanted to separate clean and dirty water while washing dishes, so we opted for a double sink. However, since a standard double sink can be costly, we divided the sink in the middle with a board to keep costs down. The middle board is usually 1mm thick, but to prevent warping during welding, we made it 3mm thick, also considering the appearance. The customer mentioned they wanted the bottom of the sink to be flat for easier dishwashing, so we positioned the drain as close to the upper right corner of the sink bottom as possible. Using cost-effective materials, we prioritized making it easy for the customer to wash dishes as per their request. In terms of design, we added a skirt board to ensure that the sink layers are not visible from the front, creating a neat appearance. We received a delightful message from the customer saying, "Thank you for accommodating my detailed requests. The installation is complete, and it fits just as I imagined. I appreciate the careful finishing of areas that I could only describe in feelings."

• Restaurant furniture and equipment

Stainless steel polished finish (#400) sink cabinet with door

In the sink used in elementary schools, the inspection port has been designed to be positioned further back so that the toes can fit in. Since we were requested by the customer to manufacture within the budget, we proposed a design that fits within the budget based on the design drawings. Additionally, to prevent water from leaking from the lined countertop, we used stainless steel for the lined post form, and since the sink needed to be deep and seamlessly connected to the back guard, we manufactured it as a single unit. Furthermore, considering the wall dimensions for installation, we allowed for some clearance instead of a perfect fit, and since the inspection port is not likely to be used frequently, we implemented a mechanism that can be easily removed with a magnet. One of our strengths is that we can outsource the drawings and have them properly designed, allowing us to manufacture with precision!

• others

This is a custom-made stainless steel sink table with drawers!!

We shaped the design based on the image sketch provided by the customer. We proposed and designed a spacious work area, placing pots and other items under the induction heater, and incorporating a long towel rack in front of the sink as per your request.

• others

It's a handrail that surrounds the piloti of the supermarket!

Since it will be used externally, the appearance of the welded parts will stand out, making it a product that tests the manufacturing company's technical skills. I was very happy when the customer came to see the finished product and said, "Nice!"

• others

We received a request from a customer for a sink that perfectly fits the dead space in their kitchen, and we handled everything from design to production.

I wanted to separate clean and dirty water when washing dishes, so I opted for a two-compartment sink. However, a standard two-compartment sink can be costly, so to keep costs down, I divided the sink with a board in the middle. The middle board is usually 1mm thick, but since it would warp when welded at that thickness, I made it 3mm thick to prevent warping and also considered the appearance.

• others

It is a stand for placing pamphlets at the entrance of a public place.

This is a repeat production of exactly the same item that our company made several decades ago. At that time, our company did not have CAD, and there were no design drawings left, so we recreated it by measuring the actual size.

• others

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

We have realized aerated solid culture using microorganisms with a compact tabletop device. This allows for the selection of test conditions with a small amount of raw materials, contributing to a reduction in development time and waste of test materials. It supports a wide range of research and development from basic studies in the lab to scale-up verification. This device is ideal as a first step towards extracting new value from underutilized biomass, developing new materials, and ultimately creating new industries.

At b-search Co., Ltd., we view AI not just as a tool for improving operational efficiency, but as a partner that enables each employee to create greater value. We utilize AI for analyzing job data, extracting trending keywords, creating and improving job postings, drafting scout messages, organizing meeting content, and sharing internal knowledge. At the same time, we value the unique contributions that only humans can make, such as developing recruitment strategies based on a deep understanding of client companies and communicating in ways that resonate with job seekers. Additionally, we handle over 100 types of job media and tools, combining AI and data analysis with the expertise of our staff to accelerate the PDCA cycle of recruitment activities. We also support recruitment practices through scouting and RPO, and we are engaged in recruitment branding that is mindful of AI searches and Google searches through BE GOOD. By merging the agility of AI with human expertise, we analyze not only the number of applications but also KPIs such as interview scheduling rates and cost per hire. Through optimal recruitment support tailored to the challenges of each company, we aim to "continuously create success from recruitment."

We are pleased to announce that AiCrystal Inc. (Headquarters: Nagoya City, Aichi Prefecture; CEO: Masaki Takaishi; hereinafter referred to as AiCrystal) has received the "Innovation Award" at the "CEATEC AWARD 2026" held at CEATEC 2026 for its "Overall Process Optimization Platform." CEATEC 2026 is one of Japan's largest IT and electronics exhibitions, scheduled to take place from October 13 (Tuesday) to October 16 (Friday), 2026, at Makuhari Messe, where the award-winning content will also be showcased. For more details, please visit the news article on our company website.