Notice of Participation in the Nagoya Machine Element Technology Exhibition

When it comes to tabletop robots, Musashi is the name. It features complete 3D alignment and automatically corrects for workpiece variations and pallet arrangement errors. It is an essential unit for micro-dispensing and stable coating.

- With the 3D alignment and leveling function, it is possible to perform XYΘ correction according to the tilt and deformation of the pallet or workpiece, as well as maintain a constant clearance against warping and distortion through "leveling (Z correction)." This ensures stable coating. - Approximately 30% reduction in operation cycle time. Significant reduction in working hours. - Improvement in yield due to high-level coating quality. - Enhanced operability and reduction in programming workload, alleviating the burden on operators. - Correction of coating trajectory according to variations in workpiece shape is also possible. - Comprehensive overseas support available (11 overseas locations). Peace of mind at overseas offices with engineers stationed at each location. For inquiries, please check our website via the link.

• Water heater Cooker IH

Semi-automatic/fully automatic coating device compatible ・Overwhelming track record ・High-speed, high-precision droplet application. Significant reduction in production cycle time. ・Fastest 333 shots/sec.

- The jet dispenser is one of the products of Musashi Engineering Co., Ltd. - Non-contact JET for "targeted application" - High-speed processing increases production takt time - Reduces costs by minimizing waste of liquid agents - Equipped with synchronous speed function - Overwhelming delivery performance - Options for liquid supply from syringe to tank available - Full lineup of dispense controllers for high-precision liquid control. - Supports various applications. - Comprehensive overseas support available (11 overseas locations). You can feel secure even during equipment setup at overseas offices, with engineers stationed at each location. For inquiries, please check our website via the link.

• Aluminum sash

- High-flow, continuous mixing and application of two-component liquid materials. - Achieves high-speed, high-quality gasket application. Also compatible with single-component dispensing specifications.

- The Mono-type dispenser is one of the products of Musashi Engineering Co., Ltd. - It excels in high-speed, high-flow, and high-aspect ratio gasket application. - It offers a lineup for both small and large flow rates. - With the dual-head feature, it can accurately measure and mix two-component curing materials. - It uses high chemical resistance parts compatible with various liquid materials. - It is equipped with a synchronous speed function. - It supports semi-automatic and fully automatic application devices. - A full lineup of dispense controllers for precise liquid control is available. - We can accommodate various applications. - We can propose combinations with our tabletop robots "SHOTMASTER" series, "SHOTmini" series, and the Cartesian robot "CROSSMASTER RX" series. - We can also suggest combinations with the essential unit for micro-application and stable production, "350PC Smart." - Comprehensive overseas support is available (11 overseas locations). You can feel secure during equipment setup at overseas offices, as engineers are stationed at each location. For inquiries, please check our website via the link.

• Bathroom unit

- Field network compatible inline general-purpose Cartesian robot - Can be combined in 9 different configurations for XY strokes to match work size.

- Selectable stroke (9 types in total) - Available in two types: finished product and assembly kit. - Compatible with field networks and CC-Link options. - Can be integrated into fully automated lines. - Image recognition and position correction function (350PC Smart) available as an option. - Full lineup of dispense controllers for high-precision liquid control. Compatible with our high-precision valves, stainless steel tanks, and various pumps. - Supports a wide range of applications beyond coating, including screw tightening, circuit board cutting, burr removal, various inspections, and printing. - Compatible with program sharing with our tabletop robots "SHOTMASTER" series and "SHOTmini" series. - Custom solutions are available to meet customer needs. - Comprehensive overseas support (11 locations worldwide). Engineers stationed at each overseas office for peace of mind. For inquiries, please check our website via the link.

• Security glass and sashes

- Achieves "high-speed tact" for screw tightening operations. - A rich lineup of applications tailored to various uses.

- The high-precision, high-speed tabletop screw tightening robot is one of Musashi Engineering's products. - A rich lineup of applications tailored to various uses. - It can be system-integrated with our tabletop robots "SHOTMASTER/SHOTmini series," which have a wide range of stroke options to match work sizes. - It can be system-integrated with our Cartesian robots "CROSSMASTER Rx series," which also have a wide range of stroke options to match work sizes. - A full lineup of dispense controllers for precise liquid control. - Supports various applications (circuit board cutting, printing, inspection, coating & UV irradiation). - Comprehensive overseas support available (11 overseas locations). Engineers are stationed at each location for peace of mind. For inquiries, please check our website via the link.

• Heating and cooling equipment and facilities

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

As a result of the conformity assessment audit of the Information Security Management System (ISMS), which is a management system standard, it has been proven that we comply with the requirements set forth by ISO/IEC, and the following audit registration certificate has been issued: JIP-ISMS517-1.0 (ISO/IEC 27017:2015) Scope of Application * Cloud Service Provider: Provision of "CaaS Cloud" This is based on the general information security standard ISO 27001 (ISMS) and includes additional management measures to address threats and risks specific to cloud services.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

We have released a case study-type assessment trial version that can be used for reviewing promotion, recruitment selection, and training measures for HR and education personnel. It can be helpful for organizing the challenges of your company's talent and identifying potential next-generation leaders. Please download it for free first and consider how to utilize it in the field.

NTT TechnoCross Corporation (Headquarters: Minato-ku, Tokyo, President: Atsuko Oka, hereinafter referred to as "NTT TechnoCross") will start providing a new version of its health management system "HM-neo" with a meeting record summarization feature powered by generative AI from April 1, 2025 (scheduled).