Don't you think that the delivery time for DC-DC converters and AC-DC power supplies takes a long time?

It is a 2-in-1 designed device that allows the use of battery charger mode and power supply mode in a single unit.

Battery Charger "NPP Series" This product features two modes: battery charger mode and power supply mode. In battery charger mode, it performs excellently as a charger utilizing stage charging! However! In power supply mode, it is possible to charge the battery while also connecting a load to the unit, thereby providing a stable DC output! In the "3-stage charging" of the charger mode, it transitions from bulk charging to absorption charging and then to float charging. However, if a minimal load such as 5A is used, it may not transition to float charging and the charging will stop (it will not reach full charge). However, by using power supply mode, it allows for both full charging and stable supply to the load. Once the battery is fully charged, it will only supply the load stably. By disconnecting from the battery, it can also be used as an AC-DC power supply. For more details, please visit our website or view the catalog below.

• Management System
• Power and Energy Equipment
• Information and communication equipment and infrastructure

The DDR Series is a compact DIN Rail TYPE DC-DC converter that can be easily mounted on a DIN Rail.

The DDR Series is a DIN Rail TYPE DC-DC converter with an ultra-slim width of 52.5mm. It features an extremely wide input voltage range of 4:1 or 2:1 and allows for output voltage adjustment. The operating temperature range is also broad, and the product includes an isolation design and many features. It is used in various systems and applications, including industrial, railway control, security control, industrial control, communication systems, and power supplies for factory automation. 【Features】 - Wide temperature range from -40℃ to +85℃ - Compliant with BS EN/EN50155 and BS EN/EN 45545-2 - Slim-type DC-DC converter - Wide input range of 2:1 or 4:1 - Adjustable output voltage - DC4000V I/O reinforced isolation - Easy installation on DIN rail - Primary and secondary isolation design - Protection: overvoltage protection, overload protection, short circuit protection, reverse connection protection, input undervoltage protection - Certifications: UL / AS/NZS / EAC / CB / CE / UKCA - 3-year long-term warranty *For more details, please refer to the PDF document or feel free to contact us.

• Power and Energy Equipment

This is a DC-DC converter that supports redundant systems.

This is a DC-DC converter that supports a redundant module system. It features built-in dual rail DC input contacts and a single output, making it suitable for a wide range of applications across an extensive temperature range of -40°C to +80°C. 【 What is Redundant Module? 】 Redundancy in a system is not a negative concept. By using multiple units, if an issue arises that renders one unit unusable, another can start up as a backup power source, maintaining the safety of the system. It serves as a backup power source to enhance the overall reliability of system operation. 【 Features 】 - Wide temperature range from -40°C to +80°C - Usable in harsh environments - Built-in dual channel DC - OK signal and alarm relay contacts - Supports 1+1 and N+1 redundant systems - Primary and secondary side isolation design - Protection: overload protection, short circuit protection - Certifications: UL / EAC / CE / CB / UKCA - Long-term warranty of 3 years

• Power and Energy Equipment
• Information and communication equipment and infrastructure
• Other Smart Grid

The PSD Series is a PCB (printed circuit board) type DC-DC converter.

The PSD Series is a PCB (printed circuit board) TYPE DC-DC converter. It is suitable for a wide range of applications as it is divided into three models with different input ranges. It is used in systems such as blood analyzers, railway instrument panels, factory automation, system control, embroidery machines, and oscilloscopes. Additionally, it is a DC-DC converter that can be used in harsh environments such as high vibration and extreme low or high temperatures. 【Features】 - Wide temperature range from -10°C to +60°C - Usable in harsh environments - Easy operation status confirmation with LED indicators - Low ripple & noise - Protection: overvoltage protection, overload protection, short circuit protection, reverse connection protection - Compliance standards: EAC / CE / UKCA - Long-term warranty of 2 years *For more details, please refer to the PDF document or feel free to contact us.

• Other power generation
• Power and Energy Equipment
• Information and communication equipment and infrastructure

It has acquired railway planning and is ideal for applications such as railways and transportation! This DC-DC converter can be used in harsh environments, including high vibration and extreme low or high temperatures.

The RSD Series is a sealed DC-DC converter designed for railway applications. It is suitable for use in harsh environments, including high vibration and extreme low or high temperatures. With a wide input range, it is ideal for many railway and various transportation systems. It is also adopted in onboard systems for trains, trams, special vehicles, emergency vehicles, as well as in systems like robots and AGVs. 【Features】 - Compliant with EN50155 and EN45545-2 railway standards - Compact 1U type (36mm) - Reinforced insulation with DC4000V I/O - Semi-sealed with cooling via free air convection - Built-in constant current limiting circuit - Easy operation status confirmation with LED indicators - Low ripple & noise - Usable in harsh environments - Internal board coating - Protection: overvoltage protection, overload protection, short-circuit protection, input reverse connection protection - Certifications: UL / AS/NZS / EAC / CB / CE / UKCA - Long-term warranty of 3 years *For more details, please refer to the PDF document or feel free to contact us.

• Other power generation
• Power and Energy Equipment

It can be used for various applications! It is a compact DC-DC converter with a large capacity.

The SD Series is a compact DC-DC converter. It is a product that can be used in harsh environments, such as high vibration and extreme low or high temperatures. It is suitable for a wide range of applications as it is divided into three models with different input ranges. It is adopted in onboard systems for railways, special vehicles, emergency vehicles, as well as in systems for robots and AGVs. 【Features】 - Built-in EMI filter, low ripple noise - Adjustable output voltage - Usable in harsh environments - Protection: overvoltage protection, overload protection, short-circuit protection, over-temperature protection - Standards obtained: AS/NZS / UL / EAC / CE / UKCA - Long-term warranty of 2 years *For more details, please refer to the PDF document or feel free to contact us.

• Other power generation

Compact and multifunctional, useful with a variety of features!!

There are four types: RS: Single output RD: 2-channel output RID: Equivalent to RD with a standalone output circuit RQ: 4-channel output RD/RID are widely adopted. A 2-in-1 type that includes a 5V output with a typical AC-DC output!! What was designed as two units can now be one, allowing for space-saving installation.

• Parts and Materials
• Manufacturing Equipment

DIN rail type AC-DC power supply Slim type "HDR" Balanced type "MDR" High capacity type "NDR"

【HDR】 Five types ranging from 15W to 150W, slim type that is easy to use. 【MDR】 Five types ranging from 10W to 100W, with alarm signal output. 【NDR】 Four types ranging from 75W to 480W, this type is for large capacity. 【Applications】 ■ Industrial automatic machinery ■ Manufacturing equipment ■ Control panels *For more details, please refer to the PDF document or feel free to contact us. 【Contact Information】 ■ Phone: 03-6424-5005 ■ Email: info@earthpower.co.jp

• Other Batteries

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

Engineering Meetup Report is Now Available! We have published the event report from the AI Startup Engineering Meetup, held at Google for Startups Campus Tokyo. The event brought together four AI startups, where engineers and engineering leaders with backgrounds at major companies shared insights on: ◆Product development ◆Career journeys ◆AI-related initiatives Kort Valuta was represented by our Chief Operating Officer and a Backend Engineer, who shared perspectives on product development in the fintech industry and the unique development environment of a startup. The networking session that followed sparked meaningful conversations on technology and career development, creating valuable new connections among participants. At Kort Valuta, we will continue to value collaboration with the technology community while striving to build even better products. Read the event report: https://prtimes.jp/main/html/rd/p/000000126.000076589.html We're hiring! If you're interested in building the future of fintech with us, check out our careers page: https://recruit.kortvaluta.com/?utm_source=WEB&utm_medium=sns&utm_campaign=ipros

We have published a white paper titled "Half a Year of Procrastination vs. Full Operation in 3 Months - Conditions for Companies That Should Use Initial Setup Support," aimed at companies considering the introduction and operation of attendance management systems. This document clearly explains the key points of initial setup that are prone to difficulties during implementation, as well as the differences between handling it in-house and utilizing specialized support. If you want to smoothly launch an attendance management system, please take a look.

From July 2026 until the end of September, we will hold a Summer Grand Appreciation Festival! High-pressure washers at great prices! Plan 1: A special set of SP60L/60new/60DX/60GE comes with a free Z swivel joint set! Plan 2: Customers who purchase a compressor will receive a new red hose (30m) for free! Plan 3: Washing hose [6M] available at a special price! A wide range of popular high-pressure washer series, cleaning accessories, painting machines, compressors, and other products are also available! Items listed can be purchased at great deals! Don't miss this opportunity!

(Japan) Termite Control Association Hachikusan FL No. 3359 (Japan) Termite Control Association Hachikusan MC No. 3511 The update from July 1, 2026, is now available.