Notice of advertisement publication in the Nikkan Kogyo Shimbun "New Year Kyoto-Shiga Industry Special Feature" January 30, 2023 issue.

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFG-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity conditions (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only in factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, and installation in manholes on ships and decks, the uses are diverse.

• others

No oil refilling required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFG-24NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Large 24-inch stand type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes available to suit the usage location ● Stepless adjustment of rotation speed using the air valve throttle ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Noise reduction of approximately 5% ● Air consumption cut by 5% * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-lubricated air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement for drying operations ● Usable in high temperature and high humidity (Temperature: 0 to 60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for LP gas and underground tank areas, and installation in manholes on ships and decks.

• Heating and cooling equipment and facilities

No oil supply needed with lubricators; equipped with a maintenance-free air motor for powerful performance! Speedy ventilation!

"Oil-Free Air Axial Flow Fan and Blower Series" AFR-08NL/AFR-12NL ◎ Equipped with an oil-free air motor Can be used without oil and without a lubricator. It features a long-lasting motor suitable for continuous operation and can be used in explosion-proof areas. ◎ An essential item for explosion-proof areas and heat hazard zones! Ventilation for infection control! Because it uses an air motor... Point 1: Lightweight! Up to 1/4 the weight of electric pressure-resistant explosion-proof blowers (compared to other manufacturers' 12-inch model axial flow fans weighing 25.5 to 37.5 kg) Point 2: Safe and secure without using power! Point 3: Fewer breakdowns! Can be used as a circulator. 《Applications》 ● Heat stroke prevention ● Infection control measures for diseases like COVID-19 ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 5-40°C) * Please consult separately for other environmental conditions. 《Field》 Not only for factories such as chemical plants, painting factories, automobile transport vessels, and shipyards, but also for various applications such as tunnel construction, as a replacement for explosion-proof fans for ventilation in underground LP gas tank stations, and installation in manholes on ships and decks.

• Ventilation and smoke exhaust equipment

Chemical plants, aircraft factories, shipyards, painting booths. For ventilation, air supply, and cooling of machinery in plants and explosion-proof areas, etc.

"Fan Series" AFR-18 (Fan diameter 450mm) AFR-24 (Fan diameter 600mm) AFR-08NL (Fan diameter 200mm) AFR-12NL (Fan diameter 300mm) AFR-18NL (Fan diameter 450mm) ◎ Air motor factory fan that does not use electricity ◎ Standard equipped with air filter and lubricator ◎ Easy to operate "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas since the power source is air ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over "Features" ● Standard equipped with air filter and lubricator * Please use No. 32 lubricating oil. ● Duct hose can be attached as an option "Applications" ● Heat stroke prevention ● Efficiency improvement for drying work ● Ventilation and air blowing in narrow spaces such as manholes and tanks ● Connecting ducts for ventilation and air blowing in manholes ● Exhaust gas discharge from construction vehicles and heavy machinery ● Air circulation in high-temperature areas and drying rooms

• pump

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure that is trouble-free ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum, functioning as an inhalation pump as well ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, making it safe for use in explosion-proof areas without fire risk 《Features》 ● Designed for collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp, paper, and printing factories Collection of cuttings in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

A vacuum cleaner for collecting oil and metal shavings, equipped with a drum for easy disposal. It's convenient for site cleaning as it can handle both dry and wet materials.

"APPQO Series" APPQO600S (For oil / Wet and dry use) APPQO600 (For oil / Wet and dry use) APPQO600-SET (For oil / Wet and dry use) APPQO600-TC200 (100/50) (For oil / Wet and dry use / Drum can specification *Drum can itself is not included) APPQO600-DTC200 (100/50) (For oil / Wet and dry use / Drum can specification) *Drum can specification (Top plate, Carry) ◎ Simple structure with no failures ◎ Equipped with new features for greater convenience, easy operation possible ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry use ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Building Cleaning Equipment

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for the transfer of solvents in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drum (large plug G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Not only used in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. It is also used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air model (CHD1-20ASUS-N). **Can be used in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, home appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• pump

Air-operated handheld pump for kerosene and light oil, suitable for use in explosion-proof areas, easy to carry, designed for drum cans with hoses on both ends.

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a type for drums with hose connection "Mechanism of the Centrifugal Pump" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• pump

Air-operated portable hand pump for solvents, suitable for use in explosive areas and easy to carry.

ACH Series" ACH-20SUS (for solvents / pump only) ACHD-20SUS (for solvents / for drums) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge capacity of 50L/min ● Air-driven for safe operation without electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Volute centrifugal pump ● Also available in a hose connection type for drums "How a Centrifugal Pump Works" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height differences, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "volute pump.

• pump

Pursuing reasonable prices. For the transportation of dilute sulfuric acid and alkaline solvents in fire-restricted areas.

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) CHD-20HPP (for solvents) CHD-20HPPV (for solvents / with ball valve) CHD-20HPPN (for solvents / with gun nozzle) CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only PSE (Electrical Appliance and Material Safety Law) compliant product PSE compliant product for safety and security

• pump

A chemical pump designed to pursue reasonable pricing. For the transfer of dilute sulfuric acid and alkaline solvents in areas where open flames are prohibited.

Chemical Pump 《CHD Series》 CHD-20APP (for solvents) CHD-20APPV (for solvents / with ball valve) CHD-20APPN (for solvents / with gun nozzle) CHD-20AHP (for solvents) CHD-20AHPV (for solvents / with ball valve) CHD-20AHPN (for solvents / with gun nozzle) 《Benefits》 ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe dispensing of flammable liquids ● Motor part can be replaced 《Features》 ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, so no risk of electric leakage ● Air motor type with high discharge volume, non-pulsating ● Dedicated for discharge PSE (Electrical Appliance and Material Safety Law) compliant product PSE compliant product for peace of mind and safety

• pump

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for an air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• pump

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

**CHD Series** CHD-20PP (For solvents) CHD-20PPV (For solvents / with ball valve) CHD-20PPN (For solvents / with gun nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing for an air motor type to be exchanged for an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid discharge. ● Gun Nozzle (N) Can be operated with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• pump

The use of materials such as SUS, PTFE, and FFKM in the liquid contact parts has increased the range of compatible liquids compared to our conventional product (CHD-20SUS)! Suitable for the transfer of solvents in chemical plants.

**CHD1 Series** CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) ● Continuous operation possible ● Lightweight and compact body ● Inexpensive **Features** ● Compliant with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 22L/min ● For discharge only **Applications** Not only used in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. Additionally, it is used in water treatment, pharmaceutical processes, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air-operated model (CHD1-20ASUSN). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Ethyl acetate ■ Butyl acetate ■ Hydrogen peroxide ■ Sodium hydroxide ■ Nitric acid (30% concentration)

• pump

[For Solvents / Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20APP (For Solvents) CHD-20APPV (For Solvents / with Ball Valve) CHD-20APPN (For Solvents / with Gun Nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement.

• pump

[For Solvents / Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed for a reasonable price.

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) is easy to detach and attach, allowing for replacement of the air motor type with an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• pump

As emergency supplies for apartments and municipalities. For replenishing drinking water during disaster emergencies.

**EDO Series** - EDO-40 (for oil, kerosene, light oil, and water / screw connection type) - EDO-50 (for oil, kerosene, light oil, and water / screw connection type) - EDO-50H (for oil, kerosene, light oil, and water / screw connection type) ◎ For emergency water supply pump ◎ Easy to operate ◎ Standing action type **Benefits** ● Maximum discharge of 100L/min ● Powerful liquid transfer with 5m suction, 5m/7m/12m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows for work while standing **Features** ● Manual, 100V power supply ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble

• pump

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - CAC-CAC 15A to 50A (All bronze / for water) - CAC-CAC JIS5K 15A to 50A (All bronze / for water) - CAC-CAC JIS10K 15A to 50A (All bronze / for water) ◎ For emergency water supply pumps ◎ Liquid transfer 《Benefits》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Two types: screw-type flange and JIS standard round flange * No flange for JIS 5K type and JIS 10K type ● Additionally available in bronze (for oil) and gasoline specifications

• pump

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - FC-CAC 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS5K 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS10K 15A to 50A (Brass for key parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer "Benefits" ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply "Features" ● Two types: screw-type flange and JIS standard round flange * No flange for JIS 5K type and JIS 10K type ● Separate models available for brass (for water) and gasoline specifications

• pump

【All brass / for water】Suction 6m (2.5m when dry) with a performance of 15m lift! Usable in locations without power.

◎Emergency water supply pump ◎Liquid transfer ◎Material of the frame 《Advantages》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Two types: screw-type phase flange and JIS standard round flange ※ No phase flange for JIS 5K type and JIS 10K type ● Separate options available for brass (for oil) and gasoline specifications 《Included in the set》 ● Frame: 1 unit ● Wing pump: available with 1 or 2 units ● Male couplings: 1 each for suction and discharge ※ Hose and female couplings are not included 《Regarding the direction of piping》 The wing pump cannot be used with the piping direction changed. Please install the suction side down and the discharge side up. The valve is designed to close under its own weight, and if installed sideways or upside down, the valve will not close, preventing liquid discharge. 《Difference between Yatsunami and King》 The King has a lower discharge volume compared to the Yatsunami. Additionally, the King does not have a round flange type or a full brass type.

• pump

Water absorption of 6m (2.5m when dry) and a performance of 15m in height. Made of aluminum, lightweight, and equipped with a manual water supply pump.

"HWA Pump Series" - HWA-0 (Brass for key parts / for water) - HWA-2 (Brass for key parts / for water) ◎ For emergency water supply pump ◎ Liquid transfer ◎ Lightweight and compact 《Benefits》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Lightweight water wing pump ● Flange is screw type ● Body made of aluminum casting

• pump

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"King Wing Pump Series" - FC-CAC 15A to 50A (Brass for essential parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer 《Benefits》 ● Suction performance of 6m (2.5m when dry) and discharge of 15m ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● With screw-type phase flange ● Only essential parts made of brass

• pump

For dispensing AdBlue in locations without power, for replenishment from the back-in-box.

"Ad-3 Series" Ad-3 (for AdBlue / battery-operated) Ad-3-100V (for AdBlue / electric) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. "Benefits" ● Lightweight and compact ● Can be refilled in places without power or air ● No need to lift the box ● Can dispense approximately 26 boxes with 2 AA batteries "Features" ● For back-in-box use * Back-in-box sold separately ● Two types: battery-operated and 100V ● Comes with a 2.5m hose (hose extension is not possible) ● Includes a handheld nozzle * Auto-stop function is not included.

• pump

We have launched a new “Audience Control Feature” for TwooCa Mall, enabling merchants to limit product visibility and sales to specific companies, organizations, and communities. With this feature, merchants can now: ✔ Offer employee-exclusive discounts and company sales ✔ Create fan club or community-only merchandise sales ✔ Customize product visibility for specific user groups In addition, by integrating with TwooCa’s payment functions and digital-money-convertible point system, the platform provides a seamless purchasing experience for users. This feature is designed to support value creation in closed communities such as: ・Employee welfare programs ・Fan clubs ・Membership communities ・Sports teams We will continue expanding TwooCa Mall as a platform optimized for employee engagement, member experiences, and community-based commerce. ▼ Press Release https://prtimes.jp/main/html/rd/p/000000108.000076589.html #TwooCa #EmployeeBenefits #Fintech #Cashless #HRTech #CommunityCommerce #SportsBusiness #FanEngagement #DX

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

We will be exhibiting at the "Hokkaido Civil Engineering and Architecture Future Technology Exhibition 2026," which will be held for two days from May 27 at the Daiwa House Premist Dome (Sapporo City, Hokkaido). This exhibition aims to provide valuable information to the construction industry in Hokkaido regarding their efforts in DX (Digital Transformation) and GX (Green Transformation), as well as to showcase and allow experiences with a variety of construction machinery, surveying equipment, and digital technologies. Our goal is to contribute to the operational efficiency of construction companies in Hokkaido and to address the challenges faced by the construction industry. On the day of the event, we will be showcasing the "High Water Content Soil Improvement Agent MT Series," so if you are nearby, please feel free to stop by. Event Name: Hokkaido Civil Engineering and Architecture Future Technology Exhibition 2026 Dates: May 27, 2026 (Wednesday) 9:30 AM - 4:00 PM May 28, 2026 (Thursday) 9:30 AM - 4:00 PM Venue: Daiwa House Premist Dome (1 Hitsujioka, Toyohira Ward, Sapporo City, Hokkaido) Organizer: Hokkaido Civil Engineering and Architecture Future Technology Exhibition Executive Committee Supported by: Hokkaido Development Bureau of the Ministry of Land, Infrastructure, Transport and Tourism, Hokkaido, Hokkaido Board of Education, Sapporo City, and others Hokkaido Civil Engineering and Architecture Future Technology Exhibition 2026 HP https://www.caft-exhibition.com/

"This is a paid seminar, but it comes with a limited-time web authentication key." We will hold a paid seminar for the software "Reinforced Soil" calculation system. Enrollment for participants has begun. This is a CPD accredited seminar. Certificates of attendance for obtaining CPD credits from other organizations can be issued. Please check the detailed announcement page below for more information.