Thank you for attending the Writing Fair 2023! Tozai Electric Industry Co., Ltd.

LED tape light TFT! 60 LEDs/m can be cut every 5 cm! Easy installation with adhesive tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

LED tape light TFT has a cumulative achievement of approximately 50,000 reels! It offers high flexibility to match installation dimensions and reduces wiring work. Easy installation and setup with double-sided tape! 【Features】 ■ A wide variety of colors, including RGB full color with SMD5050 ■ Cover: heat shrink tube (PO), improved weather resistance: filled with RTV rubber ■ Protection rating: IP54 ■ Uses Teraoka double-sided tape, can be cut every 5 cm, suitable for permanent or temporary installations! ■ Easy installation, safe specification LED (double-sided) tape light with DC12V ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it gentle on people ■ LED = energy-saving = CO2 reduction for decarbonization! 【Applications】 ■ Indoor indirect lighting (such as bar effects), interior lighting (stores, homes, etc.) ■ Space design lighting (events, concerts, etc.) ■ Decoration for showcases and signs *For more details, please contact us or refer to the catalog!

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• System lighting and lighting control
• Lighting Planning

The RGB3 elements are arranged in three rows, providing light that is about three times brighter and more vivid compared to conventional options, making a striking and glamorous presence even in large venues! Each bulb can be individually controlled!

HVLED Tape Light TFTS! ■ Maintains brightness up to the end of 3m ■ Input voltage: DC12V ■ Power consumption per bulb is 0.6W; for a cut size of 33.3mm, it is 18W (30LED)/m, and for a cut size of 100mm, it is 6W (10LED)/m ■ Cross-sectional dimensions: W11mm × H3.4mm ■ Can be installed on curved surfaces with a radius of 5cm or more ■ IP65 water-resistant specification ☆ For more details, please refer to the catalog page. Information about compatible controllers is also included. ☆ Many successful installations in the entertainment industry! Used in concerts and theaters of famous artists! Leave it to the professionals at Tozai. 【Applications】 ■ Decorative lighting for equipment ■ Decorative and spatial lighting for facilities and stores ■ Stage lighting for events and performances * For more details, please inquire or check the catalog!

• System lighting and lighting control
• Lighting
• Lighting Planning

LED tape light TF! 60 LEDs/m can be cut every 5 cm! Easy installation with double-sided tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

The features of the LED tape light TF are as follows! ■ A wide variety of colors, with RGB full color in SMD5050 ■ Refer to the catalog for covers and fillers ■ Uses Teruoka double-sided tape, suitable for both permanent and temporary installations! ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it friendly to people ■ LED = energy-saving = CO2 reduction for decarbonization! ■ DC12V 【Applications】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, homes, etc.) ■ Spatial lighting for events, concerts, etc. ■ Decoration for showcases, display shelves, and signs *For more details, please contact us or refer to the catalog.

• Display (display shelves, display boards, mannequins, etc.)
• System lighting and lighting control
• Lighting Planning

LED tape light TFTH! 60 LEDs/m can be cut every 5 cm! Easy installation with double-sided tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

The TF series LED tape light 'TFTH type' offers high flexibility to match installation dimensions and reduces wiring work. Easy installation and setup with double-sided tape! 【Features】 ■ SMD5050 includes RGB full color options ■ Cumulative production record of approximately 50,000 reels of LED tape lights! ■ The IP68 outdoor (indoor) cover is an oval-shaped silicone tube, filled with RTV rubber ■ Easy installation, safe DC12V LED (double-sided) tape light ■ Uses Teraoka's double-sided tape, suitable for both permanent and temporary setups! ■ Can be installed on curved surfaces, cuttable every 5cm (30LED/m is cuttable every 10cm) ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, reducing flicker and being gentle on people ■ LED = energy-saving = CO2 reduction for decarbonization! * Please refer to the catalog for installation examples of the tape light, compatible controllers, slim aluminum frames, and dotless tubes! * For more details, please contact us or refer to the catalog.

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• System lighting and lighting control
• Lighting Planning

This is a quick reference table for selecting the model of LED tape lights (lighting for creating light spaces). Some models support RGB full color! 60 LEDs/m can be cut every 5 cm!

We have prepared an LED tape light model selection table based on the positioning of the reference chart! 【Features】 ■ Slim and flexible tape light ■ Available in two types: SMD3528 and SMD5050, with SMD5050 supporting RGB full color ■ A wide range of light source colors ■ Safe specification of DC12V ■ Easier disposal compared to fluorescent lights ■ Emits less harmful rays such as infrared and ultraviolet, and has minimal flicker, making it gentle on people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Applications】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, homes, etc.) ■ Spatial lighting for events, concerts, etc. ■ Decoration for showcases and signs *For more details, please contact us or refer to the catalog!

• System lighting and lighting control
• Lighting
• Lighting Planning

The RGB3 elements are arranged in three rows, providing light that is approximately three times brighter and more vivid than conventional options, making a strong and glamorous presence even in large venues! Each bulb can be individually controlled!

■Maintains brightness up to 3m at the end ■Input voltage: DC12V ■Power consumption per bulb is 0.6W; for a cut size of 33.3mm, it is 18W (30LED)/m, and for a cut size of 100mm, it is 6W (10LED)/m ■Cross-sectional dimensions: W11mm × H3.4mm ■Curved installation possible with a radius of 5cm or more ■IP54 indoor specification ☆For details, please refer to the catalog page. It also includes information about compatible controllers. ☆Many successful installations in the entertainment industry! Used in concerts and theaters by famous artists! Trust the professionals at Tōzai. 【Applications】 ■Lighting for equipment decoration ■Lighting for decoration and spatial production in facilities and stores ■Production lighting for events and performances *For more details, please contact us or refer to the catalog!

• System lighting and lighting control
• Lighting
• Lighting Planning

Full-color LED tape light 12V. Individual RGB intelligent dimming controlled by DMX-SPI decoder for light space effects. Easy installation with double-sided tape.

The specifications for the full-color 12V are as follows! 【Specifications】 ■Model Name: TZHC-F12V-16L-48LED-W ■Rated Voltage: 12V / Power Consumption: 11.6W ■Number of LEDs: 48pcs/1m, LED Pitch: 20.8mm, Cut Size: 62.5mm ■Control IC: WS2811 ■LED 5050SMD RGB: Red: 600mcd / 625nm, Green: 1200mcd / 525nm, Blue: 300mcd / 465nm ■LED Beam Angle: 120 degrees ■PCB Size: W: 10mm x L: 500mm Max. 5m/roll ■Design Life: 50,000 hours, Operating Environment Conditions: Indoor -20 to +40℃ 【Features】 ■Full-color lighting (uses 5050 full-color LEDs) ■Minimal emission of harmful rays such as heat and ultraviolet light, and flicker-free, making it user-friendly ■Easier waste disposal compared to fluorescent lights 【Applications】 ■Indirect lighting, decorative lighting, and light space production for store and room interiors ■Lighting for amusement industry equipment ■Signboard edging ■Commercial LED lighting for under-shelf and showcase in stores ■Online live streaming, etc.

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• System lighting and lighting control
• Lighting Planning

LED tape light side view. Single color and RGB for indoor and outdoor use, 12V slim type, cut size: 5cm, number of LEDs: 3 per 5cm. For edging and indirect lighting.

The cumulative achievement of the LED tape light side view is approximately 50,000 reels! The features and applications are as follows. 【Features】 ■ Slim and flexible LED light. Indoor interior lighting! ■ Can be cut at 5cm intervals (every 3 pieces)! Width: approximately 10mm, thickness below 2.3mm, allowing for effective displays in various locations! ■ Please contact us in advance for cuts (covers and fillers may hinder workability) ■ Easier waste disposal compared to fluorescent lights ■ Side lighting increases variations ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it gentle on people ■ LED = Energy-saving = CO2 reduction for decarbonization! Safe to handle with a 12V specification, suitable for incorporation into fixtures and other applications! 【Applications】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, homes, etc.) ■ Spatial display lighting (events, concerts, etc.) ■ Decoration for showcases and signs Accessories sold separately: https://kensetsu.ipros.jp/product/detail/2000423996?hub=19+140413 *For more details, please contact us or refer to the catalog!

• System lighting and lighting control
• Lighting
• Lighting Planning

LED tape light TFTS! 60 LEDs/m can be cut every 5 cm! Easy installation with adhesive tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

The LED tape light TFTS offers high flexibility to match installation dimensions and reduces wiring work. Easy installation and setup with double-sided tape! 【Features】 ■ SMD5050 available in RGB full color ■ Cumulative production record of approximately 50,000 reels of LED tape lights ■ Cover: square silicone tube, filler: none ■ Easy-to-install DC12V safety specification LED (Teraoka double-sided) tape light ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has minimal flicker, making it gentle on people ■ LED = energy-saving = CO2 reduction for decarbonization! ■ IP65, waterproof specification for indoor and outdoor use *For more details, please contact us or refer to the catalog.

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• System lighting and lighting control
• Lighting Planning

LED tape light TFN! 60 LEDs/m can be cut every 5 cm! Easy installation with double-sided tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

The LED tape light TFN offers high flexibility to match installation dimensions and reduces wiring work. It allows for easy installation and setup with double-sided tape! 【Features】 ■ Approximately 50,000 reels of LED tape light sold! ■ Easy-to-install 12V safe specification LED (double-sided) tape light ■ Double-sided tape from Teraoka ■ Protection rating: IP20 ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has minimal flicker, making it gentle on people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Applications】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, homes, etc.) ■ Spatial lighting for events, concerts, etc. ■ Decoration for showcases and signs *For more details, please contact us or refer to the catalog.

• Showcases (for general store use, freezing, refrigeration, heat retention, etc.)
• System lighting and lighting control
• Lighting Planning

The LED tape light TFT RGB-SPI 12V controller comes with a screen. Individual control is possible for every 3 LEDs!

The LED tape light TFT RGB-SPI 12V features control ICs (WS2811) arranged every 3 LEDs. It operates on DC12V and can be up to 5m long (1 roll), utilizing high-brightness 5050 SMD (RGB)! 【Features】 ■ Easy installation with double-sided tape from Teraoka 777! ■ Can be cut every 5cm! ■ Cumulative production record of approximately 50,000 reels of LED tape lights! ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, reducing flicker and being gentle on the eyes ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Applications】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, homes, etc.) ■ Spatial lighting for events, concerts, etc. ■ Decoration for showcases and signs ☆ For installation examples of tape lights, compatible controllers, and dotless tubes, please refer to the catalog! *For more details, please contact us or refer to the catalog!

• System lighting and lighting control
• Lighting
• Lighting Planning

The 100V LED light bar reduces power installation costs and shortens construction time! It can be mounted using shelf hooks or magnets! The lightweight aluminum frame is high-strength and has excellent heat dissipation.

The features of the LO series LED light bar 100V are as follows: 1. No power installation required, reducing costs and time for electrical work. 2. Easy installation using shelf hooks or magnets. 3. The slim and lightweight aluminum frame offers high strength and excellent heat dissipation. 【Features of Each Component】 ☆ Aluminum Frame The body is 8mm high and 28mm wide, making it slim and stylish. ■ Ensures high heat dissipation by closely adhering to the LED substrate. ■ High strength despite being relatively lightweight. ☆ Cover (Light Guide Plate) Selection of brightness without uneven light. ■ Available in milky diffusion type and transparent cover type. ■ The transparent cover type has approximately 8% higher total luminous flux. ☆ Color Temperature Choose the color temperature according to the situation of the installation location. * For details, please refer to the catalog or contact us. 【Product Features】 ■ All components, except for the LED, are made in Japan! ■ Installation: Shelf hooks at two locations on the left and right. ■ Dimensions: Width: 28mm, Thickness: 8mm. ■ Maximum unit length is up to 1207mm. ■ Easier waste disposal compared to fluorescent lights. ■ Emits less harmful rays such as infrared and ultraviolet light, and has less flicker, making it gentle on the eyes. ■ Standards: Compliant with RoHS2.0. ■ LED (from a major South Korean manufacturer).

• LED light source/module
• Lighting
• Showcase

TOZAI's inverter shipment record exceeds 10 million units. Please leave custom solutions for sterilization devices to us!

【Domestic Production Inverter Board】 The inverter is essential for the use of ultraviolet sterilization lamps. With the technology and experience cultivated by TOZAI over many years, we will contribute to your development of sterilization lamp devices. 【Features】 - Reliable domestic production - A wide range of products tailored to various power supplies - Flexible support for various customizations such as residual heat processing and non-light detection - Lighter, energy-efficient, and higher luminous efficiency compared to copper-iron stabilizers We also offer a variety of other sterilization lamps and sockets for sterilization lamps. Please feel free to consult with us. We have a rich lineup that supports sterilization lamps from GL4 to GL40 in straight tube starter types. For more details, please feel free to contact us. Please note that the dimensions and electrical characteristics of the fluorescent lamp 30W (FL30) and the sterilization lamp (GL30) are different. *Please check the JIS standards for details. *It is necessary to confirm the matching of the lamp you will use with the inverter (this is not a verification of sterilization effectiveness). We have evaluation units available, so please feel free to inquire.

• Air conditioning equipment
• lamp
• Ballasts and fixture accessories

The core components of the UV-C sterilization device, including the PSE inverter, sterilization lamp, and socket, are all available from our company, shortening the procurement and application period for sterilization device components!

The details of the ultraviolet (UV-C) sterilization device are as follows. By attaching the sterilization lamp to the socket and connecting it to the inverter board, the sterilization lamp will light up. 【Compatible Lamps】 The fluorescent lamp 30W (FL30) and the sterilization lamp (GL30) have different dimensions and electrical characteristics. Please check the JIS standards for details. *It is necessary to confirm the matching of the lamp used and the inverter (this does not confirm sterilization effectiveness)! ■Advantages ☆Shortened procurement period - The PSE-certified inverter can shorten the application period for the sterilization device! - The driving components of the sterilization device can be assembled all at once in our company. ☆Optional support - Please consult us for harness processing and other inquiries! 【Inverter Features】 ■Lightweight, compact, and low power consumption compared to copper and iron, leading to energy savings. ■The inverter method lights up at a high frequency of 45-50 kHz, increasing luminous efficiency and eliminating flicker and noise! ■The inverter lighting circuit efficiently manages the preheating time! ■Easy assembly with the board unit. ■Cumulative shipment record: 10 million units, with transactions with over 100 companies last year. ■Produced domestically. 【Safety Design】 ■Equipped with protection circuits (overheating: thermal; overcurrent: fuse). ■Ultraviolet sterilization device.

• Air conditioning equipment
• lamp
• Ballasts and fixture accessories

DC24V UV-LED light bar! Suitable for incorporation into sterilization equipment and more. Length, mounting method, and LED pitch can also be customized!

LED light bars are easy to install: DC24V, lightweight and slim, ideal for integration into equipment! Smaller compared to UV lamps, with adjustable output based on the number of units! Available in two types: UV-A and UV-C, please choose according to your application. 【UV-A Applications: Alternative to Black Lights】 Insect traps, counterfeit bill detection, resin curing, etc. 【UV-C Applications: Alternative to Sterilization Lamps or for Integration into Sterilization Equipment!】 Air sterilization, surface sterilization, water sterilization, etc. 【Features】 ■ Customizable length ■ Lightweight aluminum frame with high strength and excellent heat dissipation ■ Connector installation processing available upon request. ■ Installation: Can be mounted with screws, shelf hooks, or magnets. *For more details, please contact us or refer to the catalog!

• LED light source/module
• Showcase
• Store display shelves

Blacklight fluorescent lamp! A lamp that efficiently emits a peak wavelength of 360nm (in the UV-A wavelength range), different from sterilization lamps!

The details of the black light fluorescent lamp are as follows. ■Features ● Uses a phosphor that absorbs visible light and has a peak in the emission spectrum around 360nm ultraviolet light, along with a deep blue filter glass that efficiently transmits near-ultraviolet light (peak wavelength around 360nm)! ■Applications Used as a light source for testing, inspection, identification, investigation, etc.! Examples of use ● Various identifications (gems, ores, etc.), counterfeit detection (documents, stamps, etc.), light sources for insect trapping and moth attracting lamps, light sources for photochemical reactions. * The rated lifespan indicates the time until the ultraviolet output reaches 60% of its initial value! ■Lighting fixtures (holder type, trough) https://premium.ipros.jp/tozaidensan/product/detail/2000529995/?hub=148+2618078 ☆ Also available is an inverter board to drive separately sold black light fluorescent lamps: https://premium.ipros.jp/tozaidensan/product/detail/2000419256/?hub=163&categoryId=45680 * For more details, please contact us or refer to the catalog.

• Other store equipment and supplies
• lamp
• Ballasts and fixture accessories

The ultraviolet sterilization lamp generates abundant ultraviolet light at 253.7nm, which has the strongest sterilizing power in the short wavelength UV-C range!

The details of the sterilization lamp are as follows. Since the sterilization lamp is invisible (cannot be seen with the naked eye), please check with the manufacturer on the power supply side (such as the fluorescent inverter board) to ensure there are no issues with its use! 【Features】 1. The ultraviolet rays from the sterilization lamp are harmful to the eyes when viewed directly or through reflected light, and since they are invisible, it is not clear when the lamp has burned out. By installing an optional lifespan detection circuit on the inverter board driving the sterilization lamp, you can know when the sterilization lamp has burned out! Therefore, continuous sterilization effects can be achieved! 2. The output is maximized at an ambient temperature of 20°C! If used at very high or low temperatures, cooling or insulation may be necessary! 3. As humidity increases, the resistance of bacteria increases and the sterilization power decreases (it is said to drop sharply at relative humidity levels of 60-70%). 4. Please check the catalog for lifespan information! 【Applications/Examples】 Medical and welfare facilities, cultural, educational, and sports facilities, commercial, accommodation, transportation, commercial, and industrial facilities, residential facilities, administrative facilities - UV-C air purifiers, automatic UV sterilization devices, sterilization lockers, cleaning robots 【Related】 Food hygiene, pharmaceuticals, chemical products *For more details, please contact us or refer to the catalog.

• Air conditioning equipment
• lamp
• Ballasts and fixture accessories

For outdoor LED tape lights, there are two types: UB and standard. The UB has higher color rendering and luminous flux, but it consumes more power and has a shorter maximum length! Rated voltage is 8V.

TOKI LSC signage is as follows! 【Features】 ■ All-directional LED lighting ■ Dimming: Optional ■ Lamp replacement available in case of trouble ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it friendly to people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Standard Applications】 Decorative lighting: Eye-catching lighting for building facades, interior lighting for amusement, bridal, and entertainment purposes 【Specifications】 Color rendering index: 70, Power consumption = 0.1W/light Product weight = approximately 100g/m 【Specifications】 Material = Tape wire: Soft PVC, Socket part: Transparent PC Lead wire = 1.55㎟×2, 0.5m included Spare end cap included Transparent rubber cap attached, bending and cutting: OK 【UB Applications】 Indirect lighting for stores and restaurants, sign lighting. Indoor interior lighting 【Specifications】 Color rendering index: 85, Power consumption = 0.4W/light Product weight = approximately 100g/m 【Specifications】 Material = Tape wire: Soft PVC, Socket part: Transparent PC Lead wire = 1.25㎟×2, 0.5m included Transparent rubber cap attached Spare end cap included, bending and cutting: OK

• Other commercial buildings and service facilities
• System lighting and lighting control
• Lighting

LED tape lights come in UB and standard types, with UB having higher color rendering and luminous flux, but also consuming more power! Rated voltage is 8V.

The features of the TOKI TLP Tape Light Standard Constant Point Type Toki Reds Standard and UB are as follows: 【Features】 ■ Omnidirectional emitting LED for decorative lighting ■ Dimming: Optional ■ Lamp replacement possible in case of trouble ■ Easier disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it gentle on people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Toki Reds Standard Applications】 Decorative lighting: Eye-catching lighting, interior lighting for amusement, etc. 【Specifications】 Color rendering index: 70, Power consumption = 0.1W/light, Product weight = approximately 70g/m 【Specifications】 Material = Tape wire: Transparent soft PVC, Socket part: Transparent PC Lead wire = 0.75㎟×2, 0.5m included, spare end cap included, bending and cutting: OK 【Toki Reds UB Applications】 Indirect lighting in stores and restaurants, indoor interior lighting, sign lighting 【Specifications】 Color rendering index: 85, Power consumption = 0.4W/light, Product weight = approximately 70g/m 【Specifications】 Material = Tape wire: Transparent soft PVC, Socket part: Transparent PC Lead wire = 0.75㎟×2, 0.5m included, spare end cap included, bending and cutting: OK

• Other commercial buildings and service facilities
• System lighting and lighting control
• Lighting

LED tape lights come in two types: UB and standard. The UB type has higher color rendering and luminous flux, but it consumes more power and has a shorter maximum length.

The features of the tape light are as follows! 【Features】 ■ Omnidirectional emitting LED suitable for decorative lighting ■ Dimming: Optional ■ Lamp replacement possible in case of trouble ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it friendly to people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【TLP Applications】 - Standard: Decorative lighting: Eye-catching lighting for building exteriors, interior lighting for amusement facilities, etc. - UB: Indirect lighting in stores and restaurants, indoor interiors, sign lighting 【LSC Applications】 - Standard: Toki Reds standard: Decorative lighting: Eye-catching lighting for indoor and outdoor building exteriors, interior lighting for amusement facilities, etc. - UB: Indirect lighting in stores and restaurants, indoor interiors, sign lighting ◎ Differences between indoor TLP and outdoor LSC 【Specifications】 Product weight = approximately 70g/m (TLP), approximately 100g/m (LSC) 【Specifications】 Material = Tape wire: Transparent soft (TLP), PVC soft PVC (LSC) Lead wire = 0.75㎟×2 0.5m included (TLP), 1.55㎟×2 0.5m included (LSC) Transparent rubber cap attached (LSC) *Other Toki products are also available.

• Other commercial buildings and service facilities
• System lighting and lighting control
• Lighting

The DC5V full-color LED tape light allows for individual RGB intelligent effect control for each LED using a DMX-SPI decoder!

The details of the LED tape light DC5V full color are as follows: ■ Model Name: TZ-HC-F5V-60L-60LED-W ■ Rated Voltage: DC5V / Power Consumption: Max. 14.4W / 1m ■ Number of LEDs: 60 pcs / 1m, LED Pitch / Cut Size: 16.6mm ■ LED 5050SMD RGB: Built-in WS2812B (Control IC) Red: 600mcd / 625nm, Green: 1200mcd / 525nm, Blue: 300mcd / 465nm ■ LED Beam Angle: 120 degrees ■ PCB Size: W: 10mm x L: 500mm Max. 4m/roll ■ Operating Environment Conditions: Indoor: -20 to +40℃, Design Life: 50,000 hours 【Applications】 ■ Commercial LED lighting for under-shelf lights and showcases in stores ■ Indirect lighting, decorative lighting, and light space production lighting for store and room interiors ■ Lighting for amusement industry equipment production ■ Border lighting for signs ■ Production lighting for weddings, after-parties, and various events ■ Online live streaming, etc. * Optional mounting holder for fixing is available on the last page of the catalog * Cumulative production record of LED tape lights is approximately 50,000 reels.

• System lighting and lighting control

LED seamless lighting fixtures are an alternative to T5 and T6 slim tube fixtures! Suitable for hotel lobbies, exhibition venues, under supermarket shelves, indirect lighting for furniture, and light space interior lighting.

LED seamless lighting is an LED lighting solution designed to replace T5 and T6 slim tube fixtures. It can be connected in series with up to 10 units. Even with a built-in power supply, it remains slim, and its luminous efficiency is 105lm/w. It is ideal for under-shelf, fixture, indirect, and ambient interior lighting! 【Applications】 ■ Under-shelf lighting for stores ■ Lighting for showrooms and clinics ■ Fixtures ■ Indirect lighting, decorative lighting, and ambient lighting for stores and rooms, including walls and displays 【Notes】 ・Not compatible with dimming ・When connecting products, please install end caps on the last product. *For installation, please refer to the optional components in the catalog. 【Specifications】 Since the following may vary by series, please refer to the catalog for details (model name, size, power consumption, input current, number of LED elements, weight, total luminous flux). ■ Input voltage: AC100–200V ±10% 50/60Hz ■ Color temperature: 2700K, 5000K (2000K, 2400K, 3000K, 3500K, 4000K, 4500K, 5700K, 6500K are made to order) ■ Color rendering index: Ra80 or higher ■ Design life: 40,000 hours ■ Main materials: Aluminum, polycarbonate ■ Operating temperature: -10℃ to +40℃

• Wiring devices
• Fluorescent Light Type
• Ceiling Lighting Fixtures

With a thickness of 4.4mm, it can be used in narrow spaces! TOZAI's LED light bar is customizable in terms of unit length and light color!

The high-output version of the LF series LED light bar has arrived. It maintains its slim, stylish design while becoming brighter with higher output. 【Features】 ■ More than twice the brightness compared to the conventional LF series in terms of total luminous flux ■ Slim design with a thickness of 4.4mm, making it usable in narrow spaces ■ A wide variety of options for LED pitch, unit length, and light colors ■ Splash-proof design (silicone-filled, equivalent to protection grade IP54) ■ Compliant with RoHS2.0, reducing environmental impact ■ Optional harness connector specification available (connectable, maximum allowable input current 1.5A) 　※ Standard specification is parallel wiring ■ Reliable domestic design and production (Made in Japan) 【Applications】 ■ Under-shelf lighting for stores, LED lighting for showcases, acrylic panels, and product shelves ■ Indirect, decorative, and ambient lighting for store interiors and rooms ■ Lighting for amusement equipment displays ■ Embedded applications in industrial equipment ■ Situations requiring direct illumination *For more details, please inquire or refer to the catalog!

• LED light source/module
• Lighting
• Showcase

For the development of ultraviolet (UV-C) sterilization devices. We propose a reliable domestic PSE inverter (power supply unit)!

Interest in ultraviolet sterilization devices has increased during the COVID-19 pandemic, leading to a surge in inverter demand! We have achieved cumulative shipments of approximately 10 million units, delivering to over 100 companies just last year. To further contribute to our customers, we have developed inverters housed in PSE cases. Our inverters are PSE certified, which helps reduce both "cost" and "time" during your product development. This allows for a shorter time to market! We offer a wide range of products and can provide customized solutions. Please take a look at our catalog. **Features of the Inverter** - "Reliable domestic production" - Innovations to reduce the number of components, maximizing performance with fewer parts ⇒ Fewer components = lower failure rates and heat generation (loss), resulting in increased reliability - Equipped with protective features (fuses, thermal protection, etc.) - Lighter, more energy-efficient, and better light emission efficiency compared to copper-iron stabilizers **Options and Customization Examples** - Non-light detection: Confirming the non-lighting of sterilization lamps that cannot be viewed directly - Others: Dimming, preheating circuits, harness processing, and various other options available Combining your expertise with our inverters, sockets, and lamps is ideal! Please feel free to consult with us.

• Air conditioning equipment
• lamp
• Ballasts and fixture accessories

TOZAI's inverter shipment record exceeds 10 million units. Many applications in sterilization devices! We can provide a complete supply of lamps, lamp sockets, and inverters!

【Domestic Production Inverter Board】 An inverter essential for the use of fluorescent lamps and ultraviolet sterilization lamps. With the technology and experience cultivated by TOZAI over many years, we will meet your company's needs. 【Features】 ■ Reliable domestic production ■ A wide lineup compatible with fluorescent lamps and sterilization lamps from 4W to 40W ■ Flexible support for various customizations such as preheating circuits and non-lighting detection ■ Lightweight, energy-saving, and high efficiency compared to copper-iron stabilizers *It is necessary to confirm the matching of the lamp you will use with the inverter. We can assist with lamp selection and matching confirmation. Evaluation samples are also available. 【Regarding Procurement of Peripheral Components】 Are you struggling with the global shortage of semiconductors and components? With connections built over 70 years of history with suppliers, we can assist you in procuring the necessary components. (Lamps, sockets, switches, connectors, power supplies, fans, wires, etc.) If you have any concerns, please feel free to contact us.

• Air conditioning equipment
• lamp
• Ballasts and fixture accessories

Fluorescent lamp inverters (domestic production): lighting fixtures, various controls, AC/DC power supplies, ultraviolet sterilization lamps, near-ultraviolet 360nm blacklight fluorescent lamps.

Free combination of fluorescent lamp inverters & special fluorescent lamps (blacklight fluorescent lamps, UV-C 253nm ultraviolet sterilization lamps)! 【Features】 <Fluorescent Lamp Inverter: Domestic Production> Super lightweight and compact compared to copper and iron, the inverter operates at a high frequency of 45-50kHz, eliminating flicker visible to the naked eye! ■Lighting Fixtures (Holder Type, Trench) - The trench significantly reduces assembly time! ■Control (Regulation) Fluorescent Lamp Inverters of various series available - Dimming: Linear control for brightness according to purpose - Control: Flashing, ON/OFF - Lifespan Detection: Function to detect non-lighting and disconnection due to the lifespan of the fluorescent lamp - Hf Fluorescent Lamp: High-frequency lighting dedicated fluorescent lamps in straight tube and circular (circle line) shapes ■Slim Line: Slim Line T5 (16・20mm) fluorescent lamps ■AC/DC Power Supply Fluorescent Lamp Inverter ■Inverter-type stabilizers for ultraviolet (UV-C) air purifiers, sterilization lockers, cleaning robots, etc., as well as for sterilizing banknotes, cleaning medals, and automatic ultraviolet sterilization devices ■Efficient preheating time with fluorescent lamp inverter lighting circuits! <Ultraviolet Sterilization Lamp: Contactless Tech (Avoiding Sealing)>

• Air conditioning equipment
• lamp
• Ballasts and fixture accessories

East and West of Lamp Sockets! Latest Comprehensive Catalog! LED-related items are listed separately! [Free Materials Available] Includes many explanations of incandescent bulb technology, safety precautions, and warnings!

East and West of Lamp Sockets! Latest Comprehensive Catalog! 【Contents】 ■ Halogen P.1 ■ HID Lamps P.15 ■ Blacklight Fluorescent Lamps, Germicidal Lamps, Inverters P.19 ■ Incandescent Lamps P.25 ■ Sockets P.67 ■ Technical Explanation of Incandescent Bulbs, Safety Precautions and Warnings P.83 *For more details, please contact us or refer to the catalog!

• lamp
• System lighting and lighting control
• Ceiling Lighting Fixtures

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

Teak and Merbau Uni and Random Length Flooring We accept made-to-order production of teak laminated flooring. 【Uni and Random Length Flooring】 Wood species: Teak, Merbau Size (thickness): 15mm, 18mm Size (width): 120mm, 150mm, 180mm Size (length): Random length, fixed length Minimum order quantity: 200 square meters 【Laminated Flooring】 Wood species: Teak Size (thickness): 15mm, 18mm Size (width): 100mm (FJL2), 150mm (FJL3), 200mm (FJL4) Size (length): Fixed length Minimum order quantity: 200 square meters

We have launched a "Procurement Agency" page where our company acts as a one-stop service for sourcing electronic components and devices. Utilizing a network of over 2,000 companies both domestically and internationally, we handle everything from material search to quotations, arrangements, delivery management, and VMI (Vendor Managed Inventory). We also welcome spot consultations for shortages and long-lead-time materials. ▼ For details and inquiries, click here https://www.bmn.jp/ipo

We have published a page introducing our EMS service, which handles the entire production of electronic devices. From PCB assembly, unit assembly, final inspection, to packaging and shipping. By linking with procurement services, we achieve both supply stability and cost optimization. If you provide us with drawings, BOM, and inspection standards, we can present you with an estimate and schedule in the shortest time possible. ▼ For details and inquiries, click here https://www.bmn.jp/ems