Small lot production available! Manufacturing SUS shims from 0.01 mm. We also accept orders for complex shapes and variations in thickness of the same shape.

High-precision ultra-fine processing with a fiber laser with a beam diameter of 40μm!

Our company specializes in "precision thin plate laser processing." We have introduced a fiber laser with a beam diameter of 40μm, enabling ultra-precision micro-processing on thin plates from SUS 0.01t and above. We can achieve high-quality finishes on thin plates and non-ferrous metals. We can process various non-ferrous metals, and through clear printing and burr-free detailed processing, we can accommodate any shape according to our customers' requests. 【Features】 - Achieves ultra-precision micro-processing on thin plates with a fiber laser with a beam diameter of 40μm - Allows for processing with minimal thermal impact and no distortion - Capable of processing with high precision and minimal burrs - Supports high-reflective materials such as aluminum, brass, and copper, which are not possible with CO2 lasers - Accommodates any shape according to our customers' requests *For more details, please refer to the PDF document or feel free to contact us.

• others

Leave the production of shims up to 450mm made of SUS and the processing of thin plates to us. The image shows a product made with 0.1t material.

Leave the processing of SUS-made machine parts and shims for gap adjustments to us. We also welcome small lot items such as prototypes and products with the same shape but different plate thicknesses. Please consider us.

• others

We will create custom orders. Materials such as SUS, copper, brass, and phosphor bronze are also available. The thickness of the SUS plate can be processed from 0.01 mm. We can also accommodate complex shapes.

Our company offers "Precision Thin Plate Laser Processing," capable of high-quality finishing for thin plates and non-ferrous metals. By introducing a fiber laser with a beam diameter of 40μm, we achieve ultra-precise micro-processing on thin plates of SUS 0.01t and above. With clear printing and burr-free detailed processing, we can accommodate any shape according to our customers' requests. We can also work with brass, copper, and phosphor bronze! We have examples of processing, including cut-out lettering in stainless steel and representations of leaf veins in copper/brass. 【Product Examples】 ■ Stainless Steel: Cut-out Letters ■ Copper/Brass: Leaf Vein Representation ■ Stainless Steel: Shim, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other services and technologies

We offer custom-made shim plates using thin plate microfabrication technology. Materials other than SUS are also available! Please feel free to consult with us.

Our company offers "Precision Thin Plate Laser Processing," capable of high-quality finishing for thin plates and non-ferrous metals. We have introduced a fiber laser with a beam diameter of 40μm, achieving ultra-precise micro-processing on thin plates of SUS 0.01t and above. With clear printing and burr-free detailed processing, we can accommodate any shape according to our customers' requests. We can also work with brass, copper, and phosphor bronze! We have examples of processing, including cut-out lettering in stainless steel and representations of leaf veins in copper/brass. 【Product Examples】 ■ Stainless Steel: Cut-out Letters ■ Copper/Brass: Leaf Vein Representation ■ Stainless Steel: Shim, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other services and technologies

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK