Introducing various wireless devices specialized for aerial photography with industrial drones, a staple of remote sensing! [Collaborative Products]

The transmitter uses analog video, while the receiver features Full HD video (HDMI) for collaboration ➡ No delay or freezing, certified for technical standards, made in Japan, perfect for embedded use!

◎ Collaboration product between the ultra-compact video transmission module (GTV-24TMS) and the analog-digital receiver (GTV-R1-HDCVBS), no license required. ★ If you have any questions or technical issues, feel free to contact us via email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) ★★ Remote sensing: A technology that captures the surrounding situation through aerial footage from a distance and obtains quantitative information about the measurement target using sensors and measuring instruments. ★ The number of receivers that can be installed for one transmitter is virtually unlimited, similar to a radio (1:n). ★ Our uncompressed wireless devices can be used with image-related equipment, image processing, surveillance systems, image transmission devices, etc., with 100% no delay! ● Video formats: 720p(60), 1080p(60), 4K(30/60). ● The size of the receiving monitor screen can be adjusted using a push switch. ● Equipped with an LED indicator to show the strength of the received signal. ● Maximum outdoor line-of-sight distance is approximately 500m.

• Audio and video equipment

Transmit analog (NTSC) 720p video from the sender, and play it back on the receiver with full HD video (1080P) + 100% no delay + no freezing!

【Overview Specifications】 ★ Optionally, the receiver side's video output (NTSC) can support full HD video output (1080p), and it can collaborate with various receivers! ★ There are embedded modules available for both the transmitter and receiver sides, allowing for the creation of custom wireless devices. The size of the uncompressed transmission module is 6.8 cm × 5.1 cm × 1.8 cm / weight 60g! ★ The advantages of uncompressed video communication are "high quality (NTSC, 720P)" with no freezing, "no delay," and "no compression distortion" during transmission and reception! ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) [Features] ◎ The number of combinations with the transmitter and receiver can be 1:n (∞)! ● Technology has been acquired for NTSC and PAL high quality (720p, 30f/s) and can operate on battery 006P. ● By using a high-gain antenna on the receiver side, the outdoor line-of-sight distance can exceed 500m. Note) Custom design for the "Unmanned Mobile Image Transmission System" is possible!

• Audio and video equipment

The transmitter's NTSC video (720p) and HD receiver (HDMI) provide 100% no latency full HD output. Contributes to the cost-effectiveness of the wireless system!

* Contributing to labor-saving in a mixed environment of analog and digital devices through collaboration! NTSC video is played back without delay or freezing with BNC connectors, and HD is equipped with HDMI connectors! Transmitter and receiver can also be combined in reverse! ★★ If you have any questions or technical issues, feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) "Features" ◎ Number of combinations with transmitter and receiver = 1:n (∞), made in Japan! ◆ No freezing or time lag; demo results: 100 out of 100 people were satisfied with the no-delay! ★ Use cases for uncompressed wireless devices include image-related equipment, image processing, surveillance systems, image transmission devices, etc.! ★ The analog (NTSC) terminal is a BNC receptacle, and the HD terminal is HDMI type A. ★★ The format for received video resolution: 720p (60), 1080p (60), 4k (30/60) can be adjusted with a push switch, and the size of the received screen can also be switched with the push switch. ★ "Technical compliance" has been obtained, and no license is required!

• Audio and video equipment

For customers considering the construction of a unique "remote sensing system" without delay, this module is made in Japan and is reliable. Please consult with us!

Model: GTV-24TMS (Made in Japan) ◎ What is remote sensing: A technology that understands the surrounding situation through aerial images taken from a distance and obtains quantitative information about the measurement target using sensors and measuring instruments. ★ Due to its ultra-compact size, it can be used as a transmitter for various applications! ★ The transmission module operates for 1.5 hours on a single 006P battery! ★ No license required as it has obtained technical compliance, no freezing! ● Compatible with various digital video signals for connection! Note: Design and compatibility for unmanned mobile image transmission systems are possible! [Features] ◎ Number of combinations with transmitter and receiver = 1:n (∞) is possible! ★ A product that stands out in terms of radio wave stability, no delay, transmission distance, confidentiality, energy saving, size, and reliability. ★ Can transmit NTSC: 720p 30f/s with no delay. By the way, the transmission delay time is on the order of μ (micro) seconds. ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)

• Dam construction

A long-selling product for business use for over 10 years! 100% free of time lag and freezing, compact and sturdy, energy-efficient, highly rated for its quality, made in Japan.

※ The key specification of industrial wireless devices is 100% no delay, not low delay. 【Features】 ★★ No time lag, no similar products, and non-compressed wireless devices! ◎ Comprehensive after-sales support! Compatible with a transmitter-receiver ratio of 1:n (∞). ★ Our non-compressed wireless devices can be used without delay in image-related equipment, image processing, surveillance systems, and image transmission devices. ★ The advantages of non-compressed video communication are 100% real-time "high quality (NTSC: 720P)" with no time lag or compression distortion between transmission and reception! [Features] ● Wireless devices that support everything from general specifications to professional specifications with no delay, certified for technical standards! ◆ The receiver is equipped with a high-brightness blue LED indicator to show the strength of the received signal. ● The transmission delay time between sending and receiving is on the order of μ (micro) seconds. ● Palm-sized, capable of continuous operation for 9 hours with a dedicated battery! ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)

• Pipeline Construction

The features of a completely uncompressed wireless device are no freezing, delay time in the microsecond range, and visually, it is not low latency but "no latency." Made in Japan for your peace of mind!

*Contributes to monitoring systems, reliability improvement, and labor-saving; demo units available; made in Japan!* ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) **Features** ★ Our uncompressed wireless devices can be used without delay for image-related equipment, image processing, monitoring systems, and image transmission devices. ★ As an option, the receiver side can support high-quality video output (NTSC: 720p) to HD video output, and modifications to the transmitter and receiver are also possible. ★ "Interference countermeasures" can be reduced by using directional antennas and installation methods. **Specifications** ◎ Number of transmitter-receiver pairs = 1:n (∞) combinations possible! ◆ Already obtained technical compliance, no license required, with a 3-year warranty! ◆ Usable with any camera system; simply connect NTSC/PAL video, yellow, red, and white AV cables, and antennas. By the way, the transmission delay time is in the order of μ (micro) seconds. ◆ The receiver is equipped with an LED indicator that shows the strength of the received signal.

• Audio and video equipment

We have various Q&A regarding purchasing and technical aspects in our question collection. It is definitely helpful. Feel free to consult us; we have demo radios available!

Our company's uncompressed wireless devices can be utilized with image-related equipment, image processing, surveillance systems, and image transmission devices with 100% no delay. If you have any questions or technical issues, please feel free to contact us via email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) We can support connections with various digital video signals in imaging equipment! Our wireless devices are unaffected by weather radar, ensuring no sudden interruptions in video! The advantages of "uncompressed" live video communication are "high quality" and "no time delay" during transmission and reception! Our wireless devices are compact and energy-efficient, contributing to the reliability and labor-saving of surveillance and management systems! Frequently Asked Questions (FAQ): Q1: Please tell me the prices of the wireless units and module products. A1: Wireless units and module products will always come with an antenna. The antennas themselves range from a few thousand yen to around 100,000 yen. Once the choice of antenna is determined, the total price will become clear.

• Other Management Services

We have newly added the "RB Catcher," a log capture device installed on impermeable sediment control dams in flow sections, to our product lineup and have started sales. The RB Catcher is directly attached to the upstream part of the impermeable sediment control dam to enhance log capture functionality. Unlike the conventional straight arrangement, it features a structural layout that creates gaps between units, ensuring that water flow is maintained without causing blockages after capturing logs. This allows for the reliable capture of subsequent logs without overflow, preventing damage downstream. By adding this new log capture device to our lineup, we will flexibly respond to various needs in the field.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

The receiver section of the radio is designed to receive signals properly even when influenced by other radios used in the world, and standards have been established for this purpose, requiring designs that comply with these standards. This time, I will briefly discuss the wireless standards for the receiver section! 【Contents】 ■ Minimum reception sensitivity ■ Adjacent channel selectivity ■ Receiver intermodulation ■ Spurious response ■ Harmonic emission * For more details, please refer to the PDF document or feel free to contact us.