[New Lineup] BCP and Evacuation Shelter Folding Simple Bed "Standard Type" (Alcohol Disinfectant Compatible)

Folding bed made of lightweight plastic board ■ Moisture-resistant and suitable for long-term storage ■ Compact storage available ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Standard Type★ 【Reasons to Choose This Product】 ■ Can be compactly stored when not in use, saving storage space. ■ Can be easily set up in about 1 minute. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■ Compatible with alcohol disinfection and sterilization, allowing for constant cleanliness. ■ Using beds in evacuation shelters helps suppress coughing caused by dust and particles. ■ Color changes are possible. *For more details, please refer to the PDF document or feel free to contact us.*

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Unexpected uses for bubble wrap beyond packaging: as a cold weather measure, it can be used to "line the floor," "stick to windows," or "serve as a substitute for a sleeping bag," as well as for emergency supplies.

Under normal circumstances, "bubble wrap" is used as packaging material, but it can be utilized differently during emergencies and disasters. It is recommended to stockpile bubble wrap in advance for various uses during emergencies and disasters. The insulation effect of bubble wrap can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors in places like gymnasiums and mitigates cold from the ground. ■ Sticking it to windows It reduces the intrusion of cold air from windows. ■ Wrapping it around water pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It helps to keep warm. ■ Popping the bubbles It can relieve accumulated stress. *For more details, please feel free to contact us.*

• Piping and insulation
• Disaster prevention supplies
• Heat insulation and heat shielding methods

Unexpected uses of bubble wrap beyond packaging: It can be used for cold protection by "laying it on the floor," "sticking it to windows," and "providing warmth," as well as preventing water pipes from freezing.

Under normal circumstances, "bubble wrap" is used as packaging material, but it can be used differently during emergencies and disasters. It is recommended to stockpile bubble wrap in advance for various uses during emergencies and disasters. The insulation effect of bubble wrap can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors in places like gymnasiums and mitigates cold from the ground. ■ Sticking it to windows It reduces the intrusion of cold air from windows. ■ Wrapping it around pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It helps to keep warm. ■ Popping the bubbles It helps relieve accumulated stress. *For more details, please feel free to contact us.*

• Piping and insulation
• Disaster prevention supplies
• Heat insulation and heat shielding methods

■Made of plastic, it is resistant to deterioration from water absorption and humidity, suitable for long-term storage. ■Can be used safely even in bad weather. ■Disinfection and sterilization with alcohol is possible.

This product uses "Plaparl," a lightweight rigid plastic sheet manufactured by Kawakami Sangyo Co., Ltd. - Since it is made of plastic, it can be reused multiple times. - It does not absorb moisture or water, allowing for long-term storage. - It can be disinfected and sterilized with alcohol. - The strength will not decrease even if the box gets wet in bad weather. *For more details, please feel free to contact us.

• Outdoor toilet unit
• Disaster prevention supplies
• Manhole body

■Partition (divider) made of lightweight plastic board ■Made of plastic, can be disinfected by wiping with alcohol and other substances

This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ■ By connecting the panels, you can create partitions. Depending on how they are connected, it allows for flexible layout changes. ■ Size settings comply with the guidelines of the Shelter and Evacuation Life Society. Internal dimensions: 1840×1840×height 1450 mm External dimensions: 2000×2000×height 1450 mm Panel size: 762×1450 Set contents: 11 panels, 20 connecting parts ■ Easy to assemble without tools. ■ Made of plastic, it can be reused repeatedly. It does not absorb moisture or water, allowing for long-term storage, and can be disinfected with alcohol. ■ By partitioning the space, it prevents droplet infection and protects privacy. *For more details, please refer to the PDF document or feel free to contact us.

• Other commercial buildings and service facilities
• partition
• Disaster prevention supplies

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Cooling equipment accounts for 30-40% of power consumption in data centers. Improving its efficiency is key to cost reduction. The importance of cooling optimization has also been demonstrated by NREL, a research institution under the U.S. Department of Energy. In cooling towers, slime, scale, and biofilm hinder heat exchange and contribute to increased chiller load. SEA'S7 suppresses these issues and improves heat exchange efficiency. This leads to an effect equivalent to a 1-3°C improvement in condenser water temperature, resulting in an expected energy savings of about 1-10% in chiller power. Additionally, it has a proven track record of inactivating 99.997% of Legionella bacteria in cooling water within 180 seconds, making it effective for hygiene measures. It is an innovative aqueous solution that simultaneously achieves water quality improvement, energy savings, and reduced maintenance. For more details, please visit our website! https://www.7seven7.jp/topics/20260322.html

Currently, Majesta Fragrance is preparing a new lineup of scents. We are collaborating with a Japanese fragrance company and meticulously crafting every detail. Highlights of the new release: - Created in partnership with a domestic specialty fragrance company - High-quality scents that elevate "omotenashi" (hospitality) - Formulated to be ideal for commercial diffusers - Scents that evoke Japan's vast nature and traditional aesthetics The long-awaited new fragrances will be completed soon. We will provide further details about the release timing here at a later date.

■ FaceMe Security "Visitor Access Management" Key Features and Characteristics < Set Access Periods for Each Visitor > - Individual settings for the dates and times visitors can enter - Optimal access periods can be set according to the visitor's situation, whether for short visits or long stays. < Two Types of Authentication Methods to Accommodate Various Scenarios > ▶ Authentication via IP Camera - Enables authentication from a distance, achieving facial recognition without the need to disembark. ▶ Authentication via Facial Recognition Device (e.g., tablet) - Ideal for entry scenarios such as reception or security posts. Can be flexibly utilized depending on the installation location and operation. - Allows for on-the-spot registration of facial information using the device, enabling smooth responses to sudden visits or unexpected guests. < Real-Time Notifications Supporting Security and Reception Operations > - Real-time notifications of visitor and employee classifications, authorization expiration, and authentication status. - Prevents delays and oversights in verification, balancing the reduction of security staff workload with enhanced security. These features resolve issues arising from visual checks, logbooks, and IC card operations, simultaneously achieving enhanced security and improved efficiency in reception and security operations.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.