We will solve your on-site problems! Why not reduce the hassle with custom-cut adhesive paper?

Complex shape cutting of adhesive paper, which is difficult to do by hand, and various different shapes are also welcome! Sold in units of one sheet, with a size of 200mm x 300mm, cut to fit as much as possible on one sheet.

Are you using adhesive paper for assembling small parts and not adhering them together? Is there a site where the adhesive paper is being cut manually? While manual cutting can produce clean straight lines, there are many shapes, such as curves or porous designs, that have limitations when cut by hand. Leave the troublesome cutting of adhesive paper to us. We welcome both multiple identical shapes and various different shapes! We will sell it in sheets, trimmed to fit within 200mm x 300mm, on a per-sheet basis. Please feel free to contact us. Companies wishing for samples, please let us know.

• others

Small lot orders are possible in the size of 200mm x 300mm! It is also possible to deliver different types of products on a single sheet, allowing for cost reduction.

The adhesive paper used for bonding and assembling parts needs to be cut to match the parts, but for small lots, it is often processed on-site. However, depending on the shape of the parts, it can be difficult to process circular or curved shapes manually, which may lead to time loss and waste of adhesive paper. Our company's adhesive paper complex shape cutting technology was developed through the actual processing of adhesive paper used in-house. Compared to manual cutting, we have significantly reduced time and waste, which has alleviated the workload on-site. Additionally, depending on the quantity of assembled products, there are often cases where small lots of various types of adhesive paper are needed rather than large quantities. Our company can accommodate mixing different types of adhesive paper within a 200mm x 300mm area. This helps to reduce the workload on-site.

• others

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacteria transmission in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus transmission by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing type "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

In recent years, with the outbreak of infectious diseases, there has been a demand for products that cater to "contactless operation," and this trend has extended to environments where automatic doors were previously operated by touch switches. As the automation of doors and the non-contact operation of automatic doors become more widespread, do you have any of the following concerns? ☑ Although automatic doors have been installed, they remain open due to people crossing frequently in busy areas. ☑ Touch switches have been introduced to reduce unnecessary openings and closings, but hygiene is a concern. ☑ Touch switches require regular battery replacements since they are powered. The light beam touch sensor "HA-T401" opens and closes automatic doors without contact, and its compact detection range makes it suitable for narrow passages and busy areas, contributing to energy savings and infection control. 【Benefits of Implementation】 ○ Adaptable to various door types with four spot settings, ideal for busy roads and narrow passages. ○ Energy-saving effects with two setting modes that reduce unnecessary openings and closings of automatic doors. ○ Equipped with a light beam touch function, allowing doors to open and close simply by waving a hand, ensuring hygiene. ◎ For more details, please download the catalog or contact us.

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

Engineering Meetup Report is Now Available! We have published the event report from the AI Startup Engineering Meetup, held at Google for Startups Campus Tokyo. The event brought together four AI startups, where engineers and engineering leaders with backgrounds at major companies shared insights on: ◆Product development ◆Career journeys ◆AI-related initiatives Kort Valuta was represented by our Chief Operating Officer and a Backend Engineer, who shared perspectives on product development in the fintech industry and the unique development environment of a startup. The networking session that followed sparked meaningful conversations on technology and career development, creating valuable new connections among participants. At Kort Valuta, we will continue to value collaboration with the technology community while striving to build even better products. Read the event report: https://prtimes.jp/main/html/rd/p/000000126.000076589.html We're hiring! If you're interested in building the future of fintech with us, check out our careers page: https://recruit.kortvaluta.com/?utm_source=WEB&utm_medium=sns&utm_campaign=ipros

We have been featured in the July 2026 issue of the monthly product information magazine "Mechatronics" for engineers, published by Gicho Business Communications Co., Ltd. The product highlighted is the ultra-thin linear vibration actuator (LRA) "TapSense" BMD-0412, which has a thickness of 1.4mm. This LRA is ideal for providing mechanical switch-like haptic feedback effects in thin tablet PCs and laptops. With excellent responsiveness and vibration levels, it can not only reproduce a crisp click sensation but also deliver a variety of haptic feedback experiences, such as dial operation feel. Additionally, its high responsiveness makes it easier to control compared to conventional LRAs. (Rare-earth-free compatible product) - Size: 25mm × 26mm × 1.4mm - Resonant frequency: 200 Hz - OD Voltage: 10.0 Vp / Waveform: 3-pulse sine wave / Vibration level @ 40g fixture: 7.50 Gpp - Rise time 0-90%: ≦30ms / Fall time 100-10%: ≦30ms - Rated voltage: 3.0Vrms - Rated current: 360mA - Resistance value: 8Ω