Heating device for all-solid-state batteries {For secondary battery and all-solid-state battery research and development!}

Minimize work inside the glove box ◎ Solid electrolyte material screening / Impedance evaluation by temperature characteristics ◎ Multiple uniform, short time, and accurate test evaluation

It excels in material screening of solid electrolytes and impedance evaluation according to temperature characteristics! ▼Features▼ 1. Reproduces various heating patterns of inorganic electrolyte heating and sintering processes in a short time - Temperature can be adjusted with an accuracy of ±1°C within a temperature range of 50°C to 1200°C - The heating rate can reach a maximum of 300°C/min, allowing for various heating patterns to be tested in a short time from room temperature 2. Efficient simultaneous evaluation of impedance measurements for lithium-ion conductivity (conductivity) - Structure allows for heating with electrodes attached to both ends of the coin cell - Coin cell holder is prepared for 4 slots - Uniform heating/measuring of 4 samples simultaneously under the same conditions - Various coin cell diameters available from Φ20 to Φ8mm 3. Simple operation and design that prevents exposure to the atmosphere / atmosphere control - Work inside the glove box is limited to sample set only - Inside the quartz tube, a quartz coin cell holder is held, and only the coin cell is accurately heated - Light heating from outside heats the completely sealed transparent quartz tube - Gas introduction system and atmosphere control during heating are also easy For more details, please contact us.

• Batteries and Capacitors
• Fuel Cells
• Other Hydrogen/Fuel Cells

Tests can be conducted while observing the condition of the material surface [using a dual-swing crosshead], keeping the sample position centered to avoid missing any changes!

The "CATY-T3H SYSTEM" is a tabletop high-temperature tensile observation device that allows for thermal fatigue testing while observing the condition of the sample surface in real-time. It can be operated easily and supports high-temperature and high-speed heating. The adoption of a dual-swing crosshead ensures that the sample's position remains centered, even with expansion and contraction, minimizing any displacement of the observation point. By combining it with optional units, it can also accommodate tests such as bending observation. 【Features】 ■ Capable of high-temperature and high-speed heating up to 1500°C * However, this depends on the shape and thermal capacity of the sample. ■ Suitable for testing not only metallic materials but also composite materials of surface-mounted components ■ Enables stress measurement, low-cycle fatigue testing, and creep testing in gas flow or vacuum conditions ■ Realizes combined testing of thermal fatigue under stress and real-time observation * For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Steel

Utilizing the know-how of custom testing machines, we support testing and research with material testing machines such as impact, fatigue durability, tensile, and torsion testing machines.

▼Examples of Testing Machine Manufacturing▼ The description is just one example. For details, please check individual pages or feel free to contact us. Customization is also available. *Special order testing machines and high-temperature in-situ observation furnaces are featured on separate pages. 1. Impact Testing Machines - Charpy (pendulum/instrumented/semi-automatic/manual/automatic specimen replenishment) for metals, non-metals, and resins. - Drop weight impact (drop/falling weight/instrumented) for metals, non-metals, resins, carbon fibers, textiles, and automotive-related materials. 2. Fatigue Endurance Testing Machines - Creep (servo-electronic/weight type/multi-station/with constant temperature bath) for metals, ceramics, carbon fibers, resins, and electric wires. - Pulley fatigue for metals and products. - Torsional fatigue for metals and resins. - Friction and wear (thrust/reciprocating/sliding/rotational) for metals, ceramics, carbon fibers, and resins. 3. Other Material Testing Machines - Universal testing machines (tensile/compression/bending) for metals, ceramics, carbon fibers, resins, and electric wires. - Static torsion testing machines for resins, rubber, etc. ▼Material Testing Machines at Yoekura▼ Since our establishment in 1980, we have been manufacturing testing machines. We consistently handle the design, development, manufacturing, maintenance, inspection, and repair of equipment, and with our accumulated know-how and technology, we have produced testing machines for various customers across different industries.

• Printed Plywood
• Ready-mix concrete
• Other measuring instruments

Fuel, engine, wheels, suspension, spark plugs, etc. Leave the creation of original testing machines and software to us! Please let us know your testing requirements!

Our company has a proven track record of creating testing machines related to the following. If you have any requests regarding other testing machines, please feel free to contact us. [ Fuel-related ] Injector durability device for poor fuel Fuel pump high-temperature durability testing device Fuel pump durability testing device Fuel pump flow measurement device Fuel pump and SIFS performance measurement device Direct injection Malvern bench [ Engine-related ] Valve seat cold heat testing machine Valve guide sliding testing machine Exhaust system fastening part cold heat fatigue testing machine Durability testing machine related Mud water durability testing machine Boots durability testing machine CVJ durability testing machine Propeller boots durability testing machine Rack boots high and low temperature durability testing machine [ Wheel and suspension-related ] Wheel rotation bending testing machine (VIA specification) Wheel drop impact testing machine (JIS/ISO) Drum durability testing machine Front fork friction testing machine Wheel lateral destruction measurement testing machine Testing machine for suspension and steering [ Spark plug-related ] SP heating load life testing machine SP dielectric strength testing machine Please contact us for other achievements.

• others

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

We have published a white paper titled "Half a Year of Procrastination vs. Full Operation in 3 Months - Conditions for Companies That Should Use Initial Setup Support," aimed at companies considering the introduction and operation of attendance management systems. This document clearly explains the key points of initial setup that are prone to difficulties during implementation, as well as the differences between handling it in-house and utilizing specialized support. If you want to smoothly launch an attendance management system, please take a look.

From July 2026 until the end of September, we will hold a Summer Grand Appreciation Festival! High-pressure washers at great prices! Plan 1: A special set of SP60L/60new/60DX/60GE comes with a free Z swivel joint set! Plan 2: Customers who purchase a compressor will receive a new red hose (30m) for free! Plan 3: Washing hose [6M] available at a special price! A wide range of popular high-pressure washer series, cleaning accessories, painting machines, compressors, and other products are also available! Items listed can be purchased at great deals! Don't miss this opportunity!

(Japan) Termite Control Association Hachikusan FL No. 3359 (Japan) Termite Control Association Hachikusan MC No. 3511 The update from July 1, 2026, is now available.

An article has been published regarding the case of introducing the attendance management system "KING OF TIME" to G.C. Planning Co., Ltd. ~ In the case of G.C. Planning ~ The previous attendance management system had the challenge of making it difficult to check attendance in compliance with laws and regulations. The decision to implement was based on top-class implementation achievements and the unique support system of the agency, i Business Partners. Although there were moments that felt challenging during the implementation and operation, we resolved each issue by consulting with the sales representatives of iBP. [Case Overview] ■ Challenges before implementation - The previous attendance management system made it difficult to check attendance in compliance with laws and regulations. ■ Key points of implementation - Top-class implementation achievements and the unique support system of the agency, i Business Partners. *For more details, please refer to the related links or feel free to contact us.