Prepare for the 8th wave of COVID-19 and the influenza outbreak with small emergency batteries.

Important vaccine temperature management | Be fully prepared for power outages with a compact emergency battery as a measure against the simultaneous outbreak of the eighth wave of COVID-19 and influenza!

▼Preparation for the simultaneous outbreak of the 8th wave of COVID-19 and influenza To avoid confusion, careful preparation for the storage and administration of vaccines is necessary as part of the healthcare system's improvement measures. Many have adopted measures for power outage prevention for freezers installed at mass vaccination sites. 【Power Outage Measures】 ▲ Power outage measures and power backup for ultra-low temperature freezers storing COVID-19 vaccines, etc. ▲ Even in the event of a power outage, the ultra-low temperature freezer can be powered for approximately 10 hours without stopping (based on a power consumption of 300W). ▲ High output of 1500W! Capable of handling inrush current. ▲ Approximately 270 installations as power outage measures for freezers in municipalities and medical institutions. Due to insufficient power capacity, freezers for vaccine storage have faced power shortages, and unexpected power outages have caused freezers to stop, leading to cases where vaccines could not be kept at the appropriate storage temperature and had to be discarded. The 'LB0043PE4' is developed with the assumption of providing emergency power for facilities that freeze cells and samples, capable of handling inductive loads. It can supply power to ultra-low temperature freezers and refrigerated storage for vaccines for approximately 10 hours without stopping. (Based on a power consumption of 300W).

• Disaster prevention supplies

To all those who have a new type of coronavirus vaccine storage freezer, unexpected disaster and power outage measures can utilize a small storage battery as a backup power source.

【Power Outage Measures】 ▲ Power outage measures for ultra-low temperature freezers storing COVID-19 vaccines and other items, including emergency power supply and power backup. ▲ Provides power to ultra-low temperature freezers for 10 hours without interruption during a power outage (based on a power consumption of 300W). ▲ High output of 1500W! Capable of handling inrush current. - Cases of vaccine disposal due to power outages are occurring frequently. Due to insufficient power capacity, freezers for vaccine storage may experience power shortages, or unexpected power outages may cause freezers to stop, leading to an inability to maintain the appropriate storage temperature, which results in frequent vaccine disposal cases. CONNEXX SYSTEMS' emergency small storage battery is originally designed for emergency power supply in facilities that freeze cells and specimens, developed to handle inductive loads. It can provide power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption. (Based on a power consumption of 300W). It is a portable model with large casters, making it easy to move and transport to workplace vaccination sites such as companies and universities. It can continue to be used as a backup power supply for important equipment even after the COVID-19 pandemic is over.

• Disaster prevention supplies
• Batteries and Capacitors
• Other Batteries

"Freezer power outage measures / securing power" Emergency small portable battery that can be brought to vaccination sites | An emergency battery is needed in case of a power outage!

【Power Outage Measures and Backup Power Supply】 It is necessary to secure power for the freezer used for storing COVID-19 vaccines and to prepare an emergency power supply in case of a power outage. There have been frequent cases of vaccine disposal due to insufficient power capacity causing the vaccine storage freezer to experience power shortages, or unexpected power outages leading to the freezer stopping, which prevents maintaining the appropriate storage temperature. The emergency small storage battery from CONNEXX SYSTEMS was originally developed with the assumption of providing emergency power for facilities that freeze cells and specimens, designed to handle inductive loads. It can supply power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours* without interruption. (*Based on a power consumption of 300W) It is portable with large casters, making it easy to move and transport to vaccination sites. To ensure smooth vaccination, the emergency small storage battery 'LB0043PE4' has already been introduced and utilized as a backup power supply in situations where power outages should not occur. It can continue to be used as a backup power supply for important equipment even after the COVID-19 pandemic is over.

• Disaster prevention supplies
• Other Batteries
• Power and Energy Equipment

[Power Outage Measures] Prepare for a complete power outage response with a compact emergency battery in anticipation of the simultaneous outbreak of the new coronavirus "8th wave" and influenza!

【Power Outage Measures】 ▲ As a power outage measure and power backup for ultra-low temperature freezers that store COVID-19 vaccines and other items ▲ Provides power supply to ultra-low temperature freezers for 10 hours without interruption during a power outage (based on a power consumption of 300W) ▲ Proven implementation in approximately 270 municipalities and medical institutions for power outage measures for ultra-low temperature freezers. Due to insufficient power capacity, freezers for vaccine storage have faced power shortages, and unexpected power outages have caused freezers to stop, leading to cases where vaccines could not be kept at the appropriate storage temperature, resulting in frequent vaccine disposal. The 'LB0043PE4' is developed with the assumption of providing emergency power for facilities that freeze cells and specimens, capable of handling inductive loads. It can supply power to ultra-low temperature freezers and refrigerated storage for about 10 hours without interruption (based on a power consumption of 300W). In preparation for the simultaneous outbreak of the COVID-19 "eighth wave" and influenza, there have been numerous inquiries about purchasing additional emergency small storage batteries and considering switching from leased or rented equipment due to concerns about running costs during the prolonged pandemic, as portable small storage batteries are being sought for disaster prevention and power outage measures.

• Disaster prevention supplies
• Other Batteries
• Power and Energy Equipment

Ensuring power supply for freezers / Power outage measures: Portable emergency battery that can be brought to workplace vaccination sites | An emergency power source is needed in case of an unexpected power outage!

**Power Outage Measures and Backup Power Supply Preparation** It is necessary to secure power for the freezer used for storing the COVID-19 vaccine and to prepare an emergency power supply in case of an unexpected power outage. There have been frequent cases of vaccine disposal due to insufficient power capacity causing the freezer to fall into a power shortage or unexpected power outages leading to the freezer stopping, which prevents the maintenance of the appropriate storage temperature. CONNEXX SYSTEMS' emergency small storage battery is originally designed for emergency power supply in facilities that freeze cells and specimens, developed to handle inductive loads. It can supply power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption. (Based on a power consumption of 300W) Being portable with large casters, it can be easily moved and brought to vaccination sites at companies and universities. To ensure smooth vaccination, the emergency small storage battery 'LB0043PE4' is already being implemented and utilized as a backup power supply in situations where power outages should not occur. It can continue to be used as a backup power supply for important equipment even after the COVID-19 pandemic is over.

• Disaster prevention supplies
• Other Batteries
• Power and Energy Equipment

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacteria transmission in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus transmission by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing type "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

In recent years, with the outbreak of infectious diseases, there has been a demand for products that cater to "contactless operation," and this trend has extended to environments where automatic doors were previously operated by touch switches. As the automation of doors and the non-contact operation of automatic doors become more widespread, do you have any of the following concerns? ☑ Although automatic doors have been installed, they remain open due to people crossing frequently in busy areas. ☑ Touch switches have been introduced to reduce unnecessary openings and closings, but hygiene is a concern. ☑ Touch switches require regular battery replacements since they are powered. The light beam touch sensor "HA-T401" opens and closes automatic doors without contact, and its compact detection range makes it suitable for narrow passages and busy areas, contributing to energy savings and infection control. 【Benefits of Implementation】 ○ Adaptable to various door types with four spot settings, ideal for busy roads and narrow passages. ○ Energy-saving effects with two setting modes that reduce unnecessary openings and closings of automatic doors. ○ Equipped with a light beam touch function, allowing doors to open and close simply by waving a hand, ensuring hygiene. ◎ For more details, please download the catalog or contact us.

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

Engineering Meetup Report is Now Available! We have published the event report from the AI Startup Engineering Meetup, held at Google for Startups Campus Tokyo. The event brought together four AI startups, where engineers and engineering leaders with backgrounds at major companies shared insights on: ◆Product development ◆Career journeys ◆AI-related initiatives Kort Valuta was represented by our Chief Operating Officer and a Backend Engineer, who shared perspectives on product development in the fintech industry and the unique development environment of a startup. The networking session that followed sparked meaningful conversations on technology and career development, creating valuable new connections among participants. At Kort Valuta, we will continue to value collaboration with the technology community while striving to build even better products. Read the event report: https://prtimes.jp/main/html/rd/p/000000126.000076589.html We're hiring! If you're interested in building the future of fintech with us, check out our careers page: https://recruit.kortvaluta.com/?utm_source=WEB&utm_medium=sns&utm_campaign=ipros

We have been featured in the July 2026 issue of the monthly product information magazine "Mechatronics" for engineers, published by Gicho Business Communications Co., Ltd. The product highlighted is the ultra-thin linear vibration actuator (LRA) "TapSense" BMD-0412, which has a thickness of 1.4mm. This LRA is ideal for providing mechanical switch-like haptic feedback effects in thin tablet PCs and laptops. With excellent responsiveness and vibration levels, it can not only reproduce a crisp click sensation but also deliver a variety of haptic feedback experiences, such as dial operation feel. Additionally, its high responsiveness makes it easier to control compared to conventional LRAs. (Rare-earth-free compatible product) - Size: 25mm × 26mm × 1.4mm - Resonant frequency: 200 Hz - OD Voltage: 10.0 Vp / Waveform: 3-pulse sine wave / Vibration level @ 40g fixture: 7.50 Gpp - Rise time 0-90%: ≦30ms / Fall time 100-10%: ≦30ms - Rated voltage: 3.0Vrms - Rated current: 360mA - Resistance value: 8Ω