Notice of advertisement published in the Nikkei Sangyo Shimbun, issued by Nikkei Inc., "JIMTOF Special Feature," November 8, 2022 issue.

A new filter ideal for chip recovery has arrived! A must-see for customers using NC lathes and machining centers!

Cleaning time for our conventional stainless steel filters When dirt is severe, it takes about 30 minutes or more, now reduced to just a few minutes! *The time is an approximate guideline and may vary depending on the cleaning method, environment, and usage conditions. ◎ Filter cleaning has become easier ◎ It now includes a dewatering function ◎ Compatible with both stainless steel and non-woven fabric types *Not included with the main unit and sold separately. 【Compatible Products】 ■ Air-operated circulating filtration cleaner 'J-F Series' 　＜J-FS＞ For chips, SUS filter type 　＜J-FF＞ For polishing, non-woven fabric filter type ■ Air-operated tank cleaning filtration cleaner 'APDQO Series' 　＜APDQO-FS＞ For chips, SUS filter type 　＜APDQO-FF＞ For polishing, non-woven fabric filter type

• pump

Cutting fluids for machine tools can be reused! Tank cleaning time is drastically reduced!

**APDQO Series** APDQO-FF100 (Non-woven Fabric Filter) APDQO-FS100 (Stainless Steel Filter) APDQO-FB100 (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools, as well as filtering and separating 'liquids' and 'solids'. Therefore, in addition to filtering chips and sludge from machine tools, it can be used in the following ways: ● Cleaning machine tool tanks (removing chips and sludge and reusing cutting fluid) ● Separating and sorting food waste in food processing plants (restaurants) ● Separating water and sludge from mountains and rivers ● Separating and sorting waste and sewage

• others

Reusing cutting fluids for machine tools and tank cleaning.

**APDQO Series** APDQO-FF (Non-woven Fabric Filter) APDQO-FS (Stainless Steel Filter) APDQO-FB (Bag Filter) ◎ No electricity used ◎ Automatic stop when full ◎ Equipped with a safety valve as standard **Benefits** ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Dedicated to JIS standard 200L open drum cans ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of not only cleaning tanks of machine tools but also filtering and separating 'liquids' and 'solids'. Therefore, it can be used for purposes other than filtering chips and sludge from machine tools, such as: ● Cleaning of machine tool tanks (removal of chips and sludge and reuse of cutting fluid) ● Separation and sorting of food waste in wastewater at food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• others

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**J-F Series** J-FF (Non-woven Fabric Filter) J-FS (Stainless Steel Filter) J-FB (Bag Filter) ◎ Does not use electricity ◎ Can be cleaned without stopping the machine ◎ Mesh can be changed as an option **Benefits** ● Cleaning can be done without stopping the machine ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes ● Compact design allows work in tight spaces **Features** ● Diaphragm circulation type ● Continuous operation possible ● Filters available to match cutting fluid *Please be sure to use an air filter lubricator.* **Applications** ● Cleaning of machine tool tanks (removal of chips and sludge, reuse of cutting fluid) ● Separation and sorting of food waste in food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• pump

Introducing the "Tank Cleaning and Filtration Cleaner" for customers using NC lathes and MC lathes, designed to reduce work burden and achieve efficient cutting fluid management.

Are you facing any of these cleaning issues? - Cleaning tasks are cumbersome and labor-intensive, causing back pain. - Long hours of cleaning lead to unpleasant odors. - Machines have to be stopped during cleaning, reducing productivity. - Accumulation of chips leads to unstable processing accuracy and defective products. Accumulation of chips and sludge can shorten the lifespan of machine tools and increase manufacturing costs. That's where our "Filtration Cleaner" comes in as a solution! The key to the solution is the introduction of a "Filtration Machine"! We have prepared the following two types according to your needs. 1. Large Capacity Open Drum Type (APDQO-F Series) This model is compatible with 200L or 100L open drums. - Reuse of cutting fluid: Efficiently reuse by filtering chips. - Improved cleaning efficiency: Significantly reduce work time. - Versatile application: Can also filter liquids other than those from machine tools. - Thorough management: Completely drain liquids to keep the tank clean. 2. Compact Circulation Type (J-F Series) This model is suitable for work in narrow spaces. - Maintain production efficiency: Work can be done without stopping the machine. - Space-saving design: Easy to install even in tight areas. - Continuous maintenance: Regular filtration keeps cutting fluid clean at all times.

• pump

Reduce downtime by cleaning the cutting fluid tank! Easy collection and disposal. Continuous operation is OK. J-F series and APDQO series.

We manufacture and sell the "Air-Powered Tank Cleaning Filtration Cleaner" to reduce the burden of daily cleaning of cutting fluid tanks. This product is recommended for those who face issues such as "machines stop during cleaning, leading to inefficiency," "difficulties in collecting and disposing of cutting fluid," "time and cost involved in tank cleaning," and "frequent breakdowns of electric vacuum cleaners." 【Product Lineup】 Circulation work without stopping the machine! Separates cutting fluid and chips! ■ Air-Powered Circulation Filtration Cleaner "J-F Series" - Separates cutting fluid and chips without stopping the machine - No risk of electric leakage during continuous operation - Easy disposal of chips - Filtration capacity of 60L/min < J-FS > Chip-specific SUS filter type Standard mesh < J-FF > Polishing-specific non-woven fabric filter type For aluminum, stainless steel, BC (CAC), resin, etc. Solving cleaning tasks in approximately 5 minutes! ■ Air-Powered Tank Cleaning Filtration Cleaner "APDQO Series" - High-speed cleaner - Can be washed thoroughly - Continuous operation is possible < APDQO-FS > Chip-specific SUS filter type < APDQO-FF > Polishing-specific non-woven fabric filter type

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not allowed.

• pump

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), capable of efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meters and gun nozzles are not compatible with foreign matter contamination.

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced-pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

Pump for transferring kerosene, light oil, and gasoline using compressed air to utilize internal pressure! Minimizes residual liquid, energy-saving, and safely allows for small portions of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

Pump for transferring using internal pressure with compressed air, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with a regulator and safety valve for peace of mind ● Equipped with an earth wire for static electricity measures (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. * Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

A pump that uses compressed air to utilize internal pressure for transfer! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), capable of waste-free discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Designed for discharge only with sealed pressurized drum, not for recovery ● Double pressure reduction with regulator and safety valve for added safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Air Pressure Pump Mechanism≫ This pump introduces reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle versions do not allow for foreign matter contamination.

• pump

Cleaning the coolant tank that used to take a whole day is now done in just 10 minutes! Improving cleaning efficiency and reducing unpleasant odors contribute to environmental improvement!

The automobile manufacturer Company I had three people working almost a full day to clean the coolant tanks of machine tools, and this had become the norm (standard operation). Therefore, we introduced the 'APDQO-F'. It allows one person to perform the task, and the working time was remarkably improved to about 10 minutes. Additionally, for machine tools that were difficult to manage, we had been outsourcing the work, which incurred costs. However, after the introduction, we were able to perform the work in-house, leading to cost reductions. [Solution] ■ APDQO-FF Non-woven fabric filter type for drum cans - Replaceable non-woven fabric, disposable type ■ APDQO-FS SUS filter type for drum cans - The filter is made of stainless steel, allowing for repeated use *For more details, please refer to the PDF document or feel free to contact us.

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dividing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series - Discharge Only" APD-25 (for oil) APD-25N (for oil / with gun nozzle) APD-25G (for kerosene, light oil, gasoline) APD-25GN (for kerosene, light oil, gasoline / with gun nozzle) APD-25AS (for solvents) APD-25ASN (for solvents / with gun nozzle) APD-25GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Pressure-fed discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types)

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dispensing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series Discharge Only" APD-20 (for oil) APD-20N (for oil / with gun nozzle) APD-20G (for kerosene, light oil, gasoline) APD-20GN (for kerosene, light oil, gasoline / with gun nozzle) APD-20AS (for solvents) APD-20ASN (for solvents / with gun nozzle) APD-20SUS (for solvents) APD-20SUSN (for solvents / with gun nozzle) APD-20GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (about 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum type for discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, and SUS types)

• pump

A vacuum cleaner for collecting oil and metal shavings in a pail. Now more convenient with a hand switch.

**APPQO Series** APPQO550AH (For oil / Wet and dry use / With hand switch) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options **Benefits** ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition ● No hassle of manually operating a valve upon return ● Can be turned ON only when needed ● Does not waste air ● Easy one-handed operation **Features** ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• pump

A vacuum cleaner for collecting oil and metal shavings in a pail can. It is convenient for site cleaning as it is suitable for both dry and wet use.

《APPQO Series》 APPQO550S (For oil / Wet and dry use) APPQO550 (For oil / Wet and dry use) APPQO550-SET (For oil / Wet and dry use / Vacuum cleaner set) ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, trouble-free ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎Simple structure, no breakdowns ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less prone to breakdown compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Designed for collection only (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure that is trouble-free ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum, functioning as an inhalation pump as well ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, making it safe for use in explosion-proof areas without fire risk 《Features》 ● Designed for collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp, paper, and printing factories Collection of cuttings in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

A vacuum cleaner for collecting oil and metal shavings, equipped with a drum for easy disposal. It's convenient for site cleaning as it can handle both dry and wet materials.

"APPQO Series" APPQO600S (For oil / Wet and dry use) APPQO600 (For oil / Wet and dry use) APPQO600-SET (For oil / Wet and dry use) APPQO600-TC200 (100/50) (For oil / Wet and dry use / Drum can specification *Drum can itself is not included) APPQO600-DTC200 (100/50) (For oil / Wet and dry use / Drum can specification) *Drum can specification (Top plate, Carry) ◎ Simple structure with no failures ◎ Equipped with new features for greater convenience, easy operation possible ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry use ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Building Cleaning Equipment

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On February 10, 2026 (Tuesday), they published a page titled "What is the true nature of 'nice people who are exhausting to interact with'? 'Covert Aggression.'" 'Covert Aggression' refers to behaviors that harm others while pretending to be a 'good person,' as well as aggressive tendencies and personality traits that attempt to manipulate others subtly. The page explains relevant cases, characteristics, causes for falling into this behavior, and ways to cope with it. (Page Overview: Excerpts) ■ What is 'Covert Aggression'? ■ Cases that fall under 'Covert Aggression' ■ Characteristics of 'Covert Aggression' ■ Why do people fall into 'Covert Aggression'? ■ Coping strategies for 'Covert Aggression' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/covert-aggression-2026-02/

We will be exhibiting at WIND EXPO, the Wind Power Generation Exhibition. We will address the challenges faced by our customers through wind condition observation using floating LiDAR in offshore wind power generation, sea state monitoring with moored buoys, and topographic and geological surveys using multi-beam acoustic depth sounding devices, as well as related marine and sea condition investigations. At our booth, we plan to introduce our products and services, display posters, and distribute brochures. We invite everyone to come and visit us.

Announcement of the seminar on "How to Use the Management System Aipia for the Construction Industry." *You can participate from your office or home as long as you have an internet connection. Seminar Overview: In the construction industry, it is necessary to simultaneously handle many tasks such as estimating, cost calculation, cost management, and schedule management. Managing these with Excel or paper is cumbersome and poses challenges for information sharing and error prevention. This seminar will explain how to utilize the management system Aipia for the construction industry to centrally manage tasks such as estimating, cost calculation, cost management, and scheduling. We will clearly introduce points to enhance operational efficiency and information collaboration, incorporating actual system operations. Seminar Content: What is the management system "Aipia" for the construction industry? Key points for streamlining estimating and cost calculation tasks Visualizing the site through cost management and scheduling What business improvements can be achieved with Aipia implementation? Frequently asked questions and points to consider during implementation Let's try using the system!