Notice of advertisement publication in the separate edition of the Nikkan Kogyo Shimbun "JIMTOF Special" November 7, 2022 issue.

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), capable of efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meters and gun nozzles are not compatible with foreign matter contamination.

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced-pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

Pump for transferring kerosene, light oil, and gasoline using compressed air to utilize internal pressure! Minimizes residual liquid, energy-saving, and safely allows for small portions of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

Pump for transferring using internal pressure with compressed air, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with a regulator and safety valve for peace of mind ● Equipped with an earth wire for static electricity measures (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. * Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

A pump that uses compressed air to utilize internal pressure for transfer! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), capable of waste-free discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Designed for discharge only with sealed pressurized drum, not for recovery ● Double pressure reduction with regulator and safety valve for added safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Air Pressure Pump Mechanism≫ This pump introduces reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle versions do not allow for foreign matter contamination.

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dividing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series - Discharge Only" APD-25 (for oil) APD-25N (for oil / with gun nozzle) APD-25G (for kerosene, light oil, gasoline) APD-25GN (for kerosene, light oil, gasoline / with gun nozzle) APD-25AS (for solvents) APD-25ASN (for solvents / with gun nozzle) APD-25GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Pressure-fed discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types)

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dispensing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series Discharge Only" APD-20 (for oil) APD-20N (for oil / with gun nozzle) APD-20G (for kerosene, light oil, gasoline) APD-20GN (for kerosene, light oil, gasoline / with gun nozzle) APD-20AS (for solvents) APD-20ASN (for solvents / with gun nozzle) APD-20SUS (for solvents) APD-20SUSN (for solvents / with gun nozzle) APD-20GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (about 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum type for discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, and SUS types)

• pump

A new filter ideal for chip recovery has arrived! A must-see for customers using NC lathes and machining centers!

Cleaning time for our conventional stainless steel filters When dirt is severe, it takes about 30 minutes or more, now reduced to just a few minutes! *The time is an approximate guideline and may vary depending on the cleaning method, environment, and usage conditions. ◎ Filter cleaning has become easier ◎ It now includes a dewatering function ◎ Compatible with both stainless steel and non-woven fabric types *Not included with the main unit and sold separately. 【Compatible Products】 ■ Air-operated circulating filtration cleaner 'J-F Series' 　＜J-FS＞ For chips, SUS filter type 　＜J-FF＞ For polishing, non-woven fabric filter type ■ Air-operated tank cleaning filtration cleaner 'APDQO Series' 　＜APDQO-FS＞ For chips, SUS filter type 　＜APDQO-FF＞ For polishing, non-woven fabric filter type

• pump

Cutting fluids for machine tools can be reused! Tank cleaning time is drastically reduced!

**APDQO Series** APDQO-FF100 (Non-woven Fabric Filter) APDQO-FS100 (Stainless Steel Filter) APDQO-FB100 (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools, as well as filtering and separating 'liquids' and 'solids'. Therefore, in addition to filtering chips and sludge from machine tools, it can be used in the following ways: ● Cleaning machine tool tanks (removing chips and sludge and reusing cutting fluid) ● Separating and sorting food waste in food processing plants (restaurants) ● Separating water and sludge from mountains and rivers ● Separating and sorting waste and sewage

• others

Reusing cutting fluids for machine tools and tank cleaning.

**APDQO Series** APDQO-FF (Non-woven Fabric Filter) APDQO-FS (Stainless Steel Filter) APDQO-FB (Bag Filter) ◎ No electricity used ◎ Automatic stop when full ◎ Equipped with a safety valve as standard **Benefits** ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Dedicated to JIS standard 200L open drum cans ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of not only cleaning tanks of machine tools but also filtering and separating 'liquids' and 'solids'. Therefore, it can be used for purposes other than filtering chips and sludge from machine tools, such as: ● Cleaning of machine tool tanks (removal of chips and sludge and reuse of cutting fluid) ● Separation and sorting of food waste in wastewater at food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• others

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**J-F Series** J-FF (Non-woven Fabric Filter) J-FS (Stainless Steel Filter) J-FB (Bag Filter) ◎ Does not use electricity ◎ Can be cleaned without stopping the machine ◎ Mesh can be changed as an option **Benefits** ● Cleaning can be done without stopping the machine ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes ● Compact design allows work in tight spaces **Features** ● Diaphragm circulation type ● Continuous operation possible ● Filters available to match cutting fluid *Please be sure to use an air filter lubricator.* **Applications** ● Cleaning of machine tool tanks (removal of chips and sludge, reuse of cutting fluid) ● Separation and sorting of food waste in food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• pump

Introducing the "Tank Cleaning and Filtration Cleaner" for customers using NC lathes and MC lathes, designed to reduce work burden and achieve efficient cutting fluid management.

Are you facing any of these cleaning issues? - Cleaning tasks are cumbersome and labor-intensive, causing back pain. - Long hours of cleaning lead to unpleasant odors. - Machines have to be stopped during cleaning, reducing productivity. - Accumulation of chips leads to unstable processing accuracy and defective products. Accumulation of chips and sludge can shorten the lifespan of machine tools and increase manufacturing costs. That's where our "Filtration Cleaner" comes in as a solution! The key to the solution is the introduction of a "Filtration Machine"! We have prepared the following two types according to your needs. 1. Large Capacity Open Drum Type (APDQO-F Series) This model is compatible with 200L or 100L open drums. - Reuse of cutting fluid: Efficiently reuse by filtering chips. - Improved cleaning efficiency: Significantly reduce work time. - Versatile application: Can also filter liquids other than those from machine tools. - Thorough management: Completely drain liquids to keep the tank clean. 2. Compact Circulation Type (J-F Series) This model is suitable for work in narrow spaces. - Maintain production efficiency: Work can be done without stopping the machine. - Space-saving design: Easy to install even in tight areas. - Continuous maintenance: Regular filtration keeps cutting fluid clean at all times.

• pump

Reduce downtime by cleaning the cutting fluid tank! Easy collection and disposal. Continuous operation is OK. J-F series and APDQO series.

We manufacture and sell the "Air-Powered Tank Cleaning Filtration Cleaner" to reduce the burden of daily cleaning of cutting fluid tanks. This product is recommended for those who face issues such as "machines stop during cleaning, leading to inefficiency," "difficulties in collecting and disposing of cutting fluid," "time and cost involved in tank cleaning," and "frequent breakdowns of electric vacuum cleaners." 【Product Lineup】 Circulation work without stopping the machine! Separates cutting fluid and chips! ■ Air-Powered Circulation Filtration Cleaner "J-F Series" - Separates cutting fluid and chips without stopping the machine - No risk of electric leakage during continuous operation - Easy disposal of chips - Filtration capacity of 60L/min < J-FS > Chip-specific SUS filter type Standard mesh < J-FF > Polishing-specific non-woven fabric filter type For aluminum, stainless steel, BC (CAC), resin, etc. Solving cleaning tasks in approximately 5 minutes! ■ Air-Powered Tank Cleaning Filtration Cleaner "APDQO Series" - High-speed cleaner - Can be washed thoroughly - Continuous operation is possible < APDQO-FS > Chip-specific SUS filter type < APDQO-FF > Polishing-specific non-woven fabric filter type

• pump

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure that is trouble-free ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum, functioning as an inhalation pump as well ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, making it safe for use in explosion-proof areas without fire risk 《Features》 ● Designed for collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp, paper, and printing factories Collection of cuttings in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

A vacuum cleaner for collecting oil and metal shavings, equipped with a drum for easy disposal. It's convenient for site cleaning as it can handle both dry and wet materials.

"APPQO Series" APPQO600S (For oil / Wet and dry use) APPQO600 (For oil / Wet and dry use) APPQO600-SET (For oil / Wet and dry use) APPQO600-TC200 (100/50) (For oil / Wet and dry use / Drum can specification *Drum can itself is not included) APPQO600-DTC200 (100/50) (For oil / Wet and dry use / Drum can specification) *Drum can specification (Top plate, Carry) ◎ Simple structure with no failures ◎ Equipped with new features for greater convenience, easy operation possible ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry use ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Building Cleaning Equipment

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On June 4, 2026, we published a page titled "Do We Set 'Forecasts' Too Optimistically Compared to Reality? The 'Planning Fallacy'." The 'Planning Fallacy' refers to the psychological phenomenon of underestimating the time, costs, and risks involved in carrying out tasks while overestimating the benefits. The page explains examples of its occurrence, the factors that lead to it, and methods to overcome it. (Page Overview: Excerpts) ■ What is the 'Planning Fallacy'? ■ Examples of the 'Planning Fallacy' ■ Why does the 'Planning Fallacy' occur? ■ How to overcome the 'Planning Fallacy'? (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/planning-fallacy-2026-06/

Kort Valuta has released a workplace initiative model that leverages points exchangeable for electronic money to support the adoption of safety and wellness habits. Examples include: ・Hydration reporting ・Viewing heatstroke prevention content ・Pre-shift condition checks ・Voice-based condition checks By linking these activities to incentive points, organizations can encourage voluntary participation while supporting workplace safety and employee well-being. The model is designed not only for frontline environments such as: ・Logistics ・Construction ・Manufacturing but also for office-based health and well-being programs. Safety posters and reminders alone are often not enough to drive lasting behavioral change. We hope this initiative provides a practical example for organizations seeking new approaches to workplace safety and employee engagement. Read the full press release: https://prtimes.jp/main/html/rd/p/000000118.000076589.html #HeatstrokePrevention #WorkplaceSafety #EmployeeWellbeing #HealthManagement #OccupationalHealth #HR #Logistics #Construction #Manufacturing #TwooCa

Our company will be presenting at the "On-Site Made Easy! Latest Technology Seminar Vol. 20" (organized by Shinken Shimbunsha)! Kinos Logic will be speaking in Session 3 (15:50 - 17:00). We will provide a clear explanation of the tool "Seigou Navi," which can streamline the review of civil engineering drawings on a PC, using real-life examples. ■ Event Overview Date and Time: June 30, 2026 (Friday) 13:00 - 17:00 *Entry starts at 12:30 Format: Zoom (online broadcast) Capacity: 300 participants for the Zoom live broadcast Participation Fee: Free (Note: Additional fees for continuing education unit application services, etc.) Application Deadline: June 26 (Friday) 17:00 Organizer: Shinken Shimbunsha