Notice of the issuance of a flyer for "Air-powered equipment that can be safely used in areas where open flames are strictly prohibited."

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not allowed.

• pump

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), capable of efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meters and gun nozzles are not compatible with foreign matter contamination.

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced-pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

Pump for transferring kerosene, light oil, and gasoline using compressed air to utilize internal pressure! Minimizes residual liquid, energy-saving, and safely allows for small portions of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

Pump for transferring using internal pressure with compressed air, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with a regulator and safety valve for peace of mind ● Equipped with an earth wire for static electricity measures (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. * Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

A pump that uses compressed air to utilize internal pressure for transfer! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), capable of waste-free discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Designed for discharge only with sealed pressurized drum, not for recovery ● Double pressure reduction with regulator and safety valve for added safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Air Pressure Pump Mechanism≫ This pump introduces reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle versions do not allow for foreign matter contamination.

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dispensing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series Discharge Only" APD-20 (for oil) APD-20N (for oil / with gun nozzle) APD-20G (for kerosene, light oil, gasoline) APD-20GN (for kerosene, light oil, gasoline / with gun nozzle) APD-20AS (for solvents) APD-20ASN (for solvents / with gun nozzle) APD-20SUS (for solvents) APD-20SUSN (for solvents / with gun nozzle) APD-20GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (about 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum type for discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, and SUS types)

• pump

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for an air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• pump

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

**CHD Series** CHD-20PP (For solvents) CHD-20PPV (For solvents / with ball valve) CHD-20PPN (For solvents / with gun nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing for an air motor type to be exchanged for an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid discharge. ● Gun Nozzle (N) Can be operated with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• pump

The use of materials such as SUS, PTFE, and FFKM in the liquid contact parts has increased the range of compatible liquids compared to our conventional product (CHD-20SUS)! Suitable for the transfer of solvents in chemical plants.

**CHD1 Series** CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) ● Continuous operation possible ● Lightweight and compact body ● Inexpensive **Features** ● Compliant with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 22L/min ● For discharge only **Applications** Not only used in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. Additionally, it is used in water treatment, pharmaceutical processes, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air-operated model (CHD1-20ASUSN). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Ethyl acetate ■ Butyl acetate ■ Hydrogen peroxide ■ Sodium hydroxide ■ Nitric acid (30% concentration)

• pump

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for the transfer of solvents in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drum (large plug G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Not only used in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. It is also used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air model (CHD1-20ASUS-N). **Can be used in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, home appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• pump

[For Solvents / Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20APP (For Solvents) CHD-20APPV (For Solvents / with Ball Valve) CHD-20APPN (For Solvents / with Gun Nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement.

• pump

Air-operated portable hand pump for solvents, suitable for use in explosive areas and easy to carry.

ACH Series" ACH-20SUS (for solvents / pump only) ACHD-20SUS (for solvents / for drums) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge capacity of 50L/min ● Air-driven for safe operation without electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Volute centrifugal pump ● Also available in a hose connection type for drums "How a Centrifugal Pump Works" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height differences, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "volute pump.

• pump

Air-operated handheld pump for kerosene and light oil, suitable for use in explosion-proof areas, easy to carry, designed for drum cans with hoses on both ends.

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a type for drums with hose connection "Mechanism of the Centrifugal Pump" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• pump

Pursuing reasonable prices. For the transportation of dilute sulfuric acid and alkaline solvents in fire-restricted areas.

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) CHD-20HPP (for solvents) CHD-20HPPV (for solvents / with ball valve) CHD-20HPPN (for solvents / with gun nozzle) CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only PSE (Electrical Appliance and Material Safety Law) compliant product PSE compliant product for safety and security

• pump

[For Solvents / Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed for a reasonable price.

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) is easy to detach and attach, allowing for replacement of the air motor type with an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• pump

A chemical pump designed to pursue reasonable pricing. For the transfer of dilute sulfuric acid and alkaline solvents in areas where open flames are prohibited.

Chemical Pump 《CHD Series》 CHD-20APP (for solvents) CHD-20APPV (for solvents / with ball valve) CHD-20APPN (for solvents / with gun nozzle) CHD-20AHP (for solvents) CHD-20AHPV (for solvents / with ball valve) CHD-20AHPN (for solvents / with gun nozzle) 《Benefits》 ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe dispensing of flammable liquids ● Motor part can be replaced 《Features》 ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, so no risk of electric leakage ● Air motor type with high discharge volume, non-pulsating ● Dedicated for discharge PSE (Electrical Appliance and Material Safety Law) compliant product PSE compliant product for peace of mind and safety

• pump

Hand-cranked pump that performs exceptionally well even in emergencies! Made of all stainless steel, perfect for dispensing organic solvents.

**HRD Series** HRD-25SUS (for solvents) HRD-25SUSH (for solvents / with hose) HRD-25SUSHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Continuous pumping is possible ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● No power supply needed ● Can also dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.5) ● High volatility liquids can be safely handled with a sealed adapter (HRD-25SUSHM) ● Very useful in emergencies and disasters **Features** ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Equipped with a 40-mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause tearing.*

• pump

Hand-crank pump that performs exceptionally well even in emergencies. Made of all stainless steel for dispensing organic solvents.

"HRD Series" HRD-25SUS (for solvents) HRD-25SUSH (for solvents / with hose) HRD-25SUSHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Continuous pumping is possible ◎ Suction pipe can be cut 《Benefits》 ● Easy operation by simply turning the handle ● No power supply needed ● Flammable organic solvents can be dispensed in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.5) ● High volatility liquids can be safely handled with a sealed adapter (HRD-25SUSHM) ● Very useful in emergencies and disasters 《Features》 ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause tearing.

• Piping and insulation

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure that is trouble-free ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum, functioning as an inhalation pump as well ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, making it safe for use in explosion-proof areas without fire risk 《Features》 ● Designed for collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp, paper, and printing factories Collection of cuttings in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

A vacuum cleaner for collecting oil and metal shavings, equipped with a drum for easy disposal. It's convenient for site cleaning as it can handle both dry and wet materials.

"APPQO Series" APPQO600S (For oil / Wet and dry use) APPQO600 (For oil / Wet and dry use) APPQO600-SET (For oil / Wet and dry use) APPQO600-TC200 (100/50) (For oil / Wet and dry use / Drum can specification *Drum can itself is not included) APPQO600-DTC200 (100/50) (For oil / Wet and dry use / Drum can specification) *Drum can specification (Top plate, Carry) ◎ Simple structure with no failures ◎ Equipped with new features for greater convenience, easy operation possible ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry use ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Building Cleaning Equipment

A vacuum cleaner for collecting oil and metal shavings in a bucket. It is convenient for site cleaning as it can be used for both dry and wet applications.

"APPQO Series" APPQO400S (For oil / Wet and dry use) APPQO400 (For oil / Wet and dry use) APPQO400G (For kerosene and light oil / Wet and dry use) APPQO400AS (For solvents / Wet and dry use) ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas with no risk of ignition "Features" ● Dedicated for collection (general oil, oil, chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more

• pump

Solvent / Wet and Dry Use: A vacuum cleaner that can collect solvents and metal shavings! Convenient for on-site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less likely to break compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Designed for collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

[For kerosene and light oil / Wet and dry use] A vacuum cleaner that can collect kerosene and light oil! Convenient for site cleaning due to its wet and dry capabilities.

◎Simple structure, trouble-free ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less likely to break compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for collection (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Oil and wet/dry vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure with no risk of failure ◎ Easy to operate ◎ Convenient options 《Advantages》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Collection of cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums for oil use.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely sucks volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for drum cans, suction only, no discharge ●Equipped with an anti-static grounding wire *Only for G and AS ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and sucks in external air 5. Liquid is sucked in through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• pump

Collection of cutting fluids, waste oil, and solvents such as kerosene, light oil, gasoline, IPA, methanol, and toluene in drums.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely sucks volatile and flammable liquids ●Inexpensive with low failure rates, reducing costs ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for drum, suction only, discharge not possible ●Equipped with grounding wire for static electricity measures *Only for G and AS ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside through the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and sucks in external air 5. Liquid is sucked in through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• pump

Collection of cutting fluids, waste oils, and solvents such as IPA, methanol, and toluene in drums.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ● Safely suction volatile and flammable liquids ● Cost-effective with low failure rates, reducing expenses ● Low air consumption, energy-saving ● Acceptable for small amounts of foreign substances ● Continuous operation possible ● Automatic stop when full ● Easy adapter installation (bag nut type) 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed negative pressure type for suction only, discharge not possible ● Equipped with an anti-static grounding wire *only for G and AS ● Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside through the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and draws in external air 5. Liquid is suctioned through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• pump

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

"APDQ1 Series - Inhalation Only" APDQ1-25 (for oil) APDQ1-25G (for kerosene, diesel, gasoline) APDQ1-25AS (for solvents) ◎ Explosion-proof design that does not use electricity ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Safely suction volatile and flammable liquids ● Cost-effective with low failure rates, reducing expenses ● Low air consumption, energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy adapter installation (bag nut type) "Features" ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Suction only with a sealed negative pressure system for drums, discharge not possible ● Ground wire for static electricity prevention included (for G and AS only) ● Built-in float ball for leak prevention function

• pump

Ideal for transferring liquids from drums for kerosene, light oil, and gasoline! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-use for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Equipped with an electrostatic discharge grounding wire (for G and AS only) ●Built-in float ball for leak prevention function

• pump

Ideal for transferring liquids from oil drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Equipped with an anti-static grounding wire (for G and AS only) ●Built-in float ball for leak prevention function

• pump

Ideal for transferring liquids from solvent drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Equipped with an anti-static grounding wire *only for G and AS ●Leak prevention function with built-in float ball

• pump

Ideal for transferring liquids from a drum. Switching between discharge and suction is easy with just one lever.

"APDX1 Series Dual Use for Inhalation and Exhalation" APDX1-25 (for oil) APDX1-25G (for kerosene, diesel, gasoline) APDX1-25AS (for solvents) ◎ Explosion-proof design that does not use electricity ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Dual use for inhalation and exhalation ● Minimal residual liquid (approximately 200cc), no waste in exhalation ● Safe transfer of volatile and flammable liquids ● Cost-effective with low failure rates, reducing expenses ● Low air consumption, energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Easy adapter installation (bag nut type) "Features" ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Ground wire for static electricity prevention included (for G and AS only) ● Built-in float ball for leak prevention function

• pump

Air-operated handheld pump that can be used in explosion-proof areas and is easy to carry.

"ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACH-20SUS (for solvents / pump only) ACHD-20AL (for kerosene and light oil / for drum) ACHH-20AL (for kerosene and light oil / both ends of hose) ACHD-20SUS (for solvents / for drum) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge capacity of 50L/min ● Safe due to air drive, no electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral type centrifugal pump ● Also available in drum type, hose connection type

• pump

An air motor-driven vane hand pump that can be used in explosion-proof areas and is easy to carry! For transferring liquids from tanks or drums such as kerosene, diesel, and lubricating oil.

【For Solvents / Pump Unit & Drum Can】 《AMVH Series》 AMVH-20SUS (For Solvents / Pump Unit) AMVHD-20SUS (For Solvents / Drum Can) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum can ◎ Customizable 《Benefits》 ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability 《Features》 ● Maximum lift height of 5m ● Volute type centrifugal pump ● Also available in hose connection type for drum cans 《Vane Motor Mechanism》 This motor uses compressed air to move the blades like a windmill. It is capable of maintaining a certain rotation speed. It can transfer medium viscosity liquids (up to 1500 cP) within a height and distance of 10m. The center of the pump body is slightly offset from the center of the impeller, creating a structure where the vanes operate due to centrifugal force.

• pump

An air motor-driven vane hand pump that can be used in explosion-proof areas and is easy to carry! For transferring liquids from tanks or drums such as kerosene, diesel, and lubricating oil.

"AMVH Series" AMVH-20FC (For oil, kerosene, and light diesel / Pump only) AMVHD-20FC (For oil, kerosene, and light diesel / For drums) AMVHH-20FC (For oil, kerosene, and light diesel / Hose at both ends) [For oil, kerosene, and light diesel / Pump only / For drums / Hose at both ends] ◎ Explosion-proof specification that does not use electricity ◎ Usable without sealing the drum ◎ Customizable [Benefits] ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability [Features] ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Maximum lift height of 5m ● Spiral type centrifugal pump ● Also available in a type for drums and hose connection [How the vane motor works] This is a motor that uses compressed air to move the blades like a windmill. It is a motor that can maintain a certain rotation speed. It can transfer medium viscosity liquids (up to 1500 cP) within a height and distance of 10m. The center of the pump body is slightly offset from the center of the impeller, creating a structure where the vanes operate due to centrifugal force.

• pump

A portable air-operated hand pump that can be used in explosion-proof areas. For transferring liquids such as kerosene, diesel, and lubricating oil from tanks or drums.

**AMVH Series** AMVH-20FC (for oil, kerosene, and diesel / pump only) AMVH-20SUS (for solvents / pump only) AMVHD-20FC (for oil, kerosene, and diesel / for drums) AMVHH-20FC (for oil, kerosene, and diesel / hose at both ends) AMVHD-20SUS (for solvents / for drums) ◎ Explosion-proof specification that does not use electricity ◎ Usable without sealing the drum ◎ Customizable **Benefits** ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Maximum lift height of 5m ● Spiral type centrifugal pump ● Also available in a hose connection type for drums

• pump

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFG-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity conditions (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only in factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, and installation in manholes on ships and decks, the uses are diverse.

• others

No oil refilling is required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFK-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Wall-mounted "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes available to suit the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Noise reduction of approximately 5% ● Air consumption reduced by 5% * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• Heating and cooling equipment and facilities

#Intersolar South America - We invite you to attend the most influential solar energy event in Latin America. You will be able to see innovative solar mounting solutions designed for the Latin American market. At booth R2.82, Grace Solar will showcase how it is evolving regional solar projects: - Ground-mounted solar mounting systems suitable for Brazil's tropical storms and humid environments - Flexible roof installation systems that can accommodate diverse architectural needs Let's build the future of solar power together! Venue: Expo Center Norte, São Paulo, Brazil, Booth R2.82 Date: August 26-28, 2025

We have introduced the commercial aroma diffuser "Majesta Fragrance" to a cabaret club in Tokyo. The selected scent is "Royale," which offers a sense of calm and elegance. It spreads naturally throughout the floor, creating a high-quality space that satisfies the five senses. Majesta Fragrance is available for a free trial installation exclusively in the Kanto area. If you are interested in enhancing your store's scent experience, please feel free to contact us.

We have released a catalog for a trial version of a conceptual skills course designed to efficiently develop logical thinking and problem-solving skills in a short period. The course is structured in three levels, from basic to practical and applied, supporting skill enhancement directly related to work through video viewing, exercises, and detailed feedback. There is also a free trial version available, lasting about 10 to 20 minutes, allowing you to easily check the course content and approach. It is ideal for promotion and advancement exam preparation, as well as for developing the next generation of leaders, with a proven track record in many companies. For detailed materials or to apply for the trial version, please use the link below. Feel free to take advantage of it!

The RTC series rugged tablets are designed to withstand harsh industrial environments, enhancing productivity, improving safety, and reducing operational costs. The RTC-I116-JP is equipped with a 12th generation Intel Core i7/i5 processor and Windows 10/11, and its 11.6-inch touchscreen allows for precise operation even in rainy conditions or while wearing gloves. Additionally, the display with a brightness of 1,000 nits ensures clear visibility even under direct sunlight, and with IP66 compliance, a 1.2m drop resistance, and hot-swappable capabilities, it strongly supports continuous operation in the field. Factory options: ★ 2D barcode scanner RTC-2D-Z ★ NFC module RTC-NFC116 A wide range of selectable options: ■ Vehicle RAM bracket RTC-RAM ■ Vehicle charger (for vehicle batteries) RTC-VC-19D ■ Vehicle charger (for cigarette sockets) RTC-VC-100W ■ Shoulder strap RTC-SS ■ Stylus pen RTC-SP ■ Lithium-ion battery (3800mAh) RTC-LB-3800

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On August 12, 2025 (Tuesday), they published the page "Read in One Go During Obon! Top 10 Accesses from April to June." This page introduces the top 10 blog articles by access count from April to June 2025 that you want to read in one go during Obon. (Page Overview: Excerpts) ■10th: "Filter Bubble" ■09th: Should 'Phone Numbers' Be Public on Websites!? ■08th: "In-group Bias" ■07th: "Peter Pan Syndrome" ■06th: "Butterfly Effect" ■05th: Useful for Business! Downloadable Content ■04th: "Reaction Formation" ■03rd: Is "Quality Over Quantity" Important? Or is "Quantity Over Quality" Important? ■02nd: "The Emperor's New Clothes" Phenomenon ■01st: "Janet's Law" ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/top-10-accesses-in-2025-2q-2025-08/