Notice of Participation in the "2022 Japan Die Casting Exhibition"

Significantly reduce work time by one-third without removing the tang. Trial kits are also available in the lineup.

The "Tangless Insert" is a female thread reinforcement material that can be inserted without a tang using a special tool. Since the insert has no directional orientation, it can be inserted from either side. There is no need to break off or search for the tang after insertion, which reduces the working time by about one-third compared to conventional products, thereby improving work efficiency. 【Features】 ■ No specialized skills required. Anyone can easily perform the task. ■ Minimally damages the female thread during extraction. ■ Both manual and automatic extraction of the insert are possible. ■ A kit that includes manual insertion tools, drills, and taps is also available (three products: M4/M5/M6). *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

[Free Sample Available] A heating material made by turning a new carbon nanotube (CNT) material into a paint and applying a thin film coating.

Unlike planar heating elements made of metallic materials such as nichrome wire, this is a material that heats uniformly across its entire surface. HEATNEX utilizes CNT as a resistive element and prints it onto a film, achieving a flexible heating material. By adjusting the transparency, it can be made close to transparent and can also accommodate specifications that allow light to pass through. 【Features】 ■ A flexible heating material that can heat uniformly across its entire surface. ■ Efficient heating through heat conduction and far-infrared radiation. ■ Excellent thermal conductivity and thermal radiation, allowing for instant heating and heat dissipation. ■ It is possible to create a lightweight planar heating element by forming electrodes with conductive paste, etc. ■ Capable of emitting approximately five times more far-infrared radiation than metallic heating elements. *Evaluation results are based on internal comparisons. 【Newly Developed Products】 High-Temperature Compatible Products - Heat Resistance: 200℃ (Standard Product: 80℃) Using polyimide as the substrate allows for heating at higher temperatures compared to standard products. Low-Voltage Compatible Products - Heat Resistance: 80℃ - Surface Resistivity: 30Ω/□ (Standard Product: 150Ω/□) Can be used at low voltage, making it widely applicable. *For more details, please download the materials or contact us.

• others

Certified by the Japan Architecture Center! Just attach it to the installed nut to effectively prevent loosening and falling off of bolts and nuts!

It is significantly more effective than double nut anti-loosening measures and can reduce maintenance inspection processes. It also contributes to approximately 40% weight reduction. It can be easily installed using commercially available socket wrenches. It has passed tests using an impact-type vibration testing machine compliant with NAS3350 standards. The sizes range from M4 to M24. 【Product Features】 ○ Compliant product evaluated by the Japan Building Center (BCJ evaluation - LS0107-01, applicable to M12). ○ The anti-loosening performance of LockOne has been proven in tests using an impact-type vibration testing machine compliant with NAS3350 standards. ○ Available in sizes from M4 to M24. ○ Can be installed with a commercially available 12-point socket wrench. ◎ For more details, please download the catalog or contact us.

• Fastening hardware
• Interior and exterior construction accessories
• Work tools

Easy installation with one hand. Prevents nut detachment with spring force. Reduces the risk of ceiling collapse. Also passes tests compliant with NAS3350 standards.

"Instant Lock" is a loosening and falling prevention device that is suitable for long bolts such as hanging bolts, and can be easily attached with just a light force. (Developed by the company "Kiri Manufacturing Co., Ltd.") No tools or special skills are required, and it demonstrates stable performance due to the restoring force of the spring. It has also passed tests using an impact-type vibration testing machine compliant with the NAS3350 standard. It reduces the risk of falling construction materials, including suspended ceilings, and contributes to the safety of workplaces, stores, and residences. We can also produce sizes other than w3/8, so please feel free to inquire. M8, M10, and M12 have been added. 【Features】 ■ Can be attached and detached instantly with one hand ■ No torque management required ■ Provides a long-term loosening prevention effect *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

We are pleased to announce that Gywood has been recommended as a featured building material in the special project "Recommended Building Materials" at the Housing Business Fair within the comprehensive exhibition for housing, architecture, and real estate [BREX Kansai]. We will be exhibiting in the "Recommended Building Materials and Equipment" zone, where professionals from the field gather to showcase their recommended materials. We invite everyone to stop by and visit us.

Seminar Overview As the labor shortage in manufacturing sites becomes more severe, the labor costs and time losses associated with the "transportation" of products and components, as well as "cleaning" within factories, have become critical management issues that cannot be overlooked. In this webinar, we will introduce the latest use cases of "Autonomous Mobile Robots (AMR)" and "Commercial Cleaning Robots" that achieve productivity improvements in manufacturing environments. We will specifically address questions such as "How are other companies operating these technologies?" and "What kind of cost reduction effects can be expected after implementation?" by providing concrete explanations of actual before-and-after scenarios and operational flows. Factory managers and members of production technology and DX promotion departments who want to advance automation and efficiency on-site are encouraged to participate! Recommended for: - Those who are unsure about where to start with automation, labor reduction, and DX in their factories. - Those who want to alleviate labor shortages on-site and focus resources on core operations to improve productivity. - Those who want to stay updated on the latest trends in the use of transportation robots (AMR) and cleaning robots.

Our representative, Koichi Yokoyama, will be speaking at an online seminar scheduled for November 27 (Friday). Participation is possible from anywhere in the country. We hope you will join us! 【Event Overview】 Date: November 27, 2026 (Friday) 13:00 - 15:05 (Deadline: November 25, 17:00) Venue: Online (Zoom) / Participation Fee: Free (Pre-registration required, lottery system) Organizer: Otsuka Shokai Co., Ltd. 【Session Details (14:05 - 14:35)】 "What Does Reliable Data Creation Mean? - Insights from Certified Public Accountants and Tax Accountants on Creating Trustworthy Data Before Relying on AI" We will discuss the quality and reliability of data that influences AI outcomes, covering points such as "Considerations for Practicing DX" and "Data Integrity and Authenticity" from the perspectives of certified public accountants and tax accountants, to lay the groundwork for safely utilizing AI. *Applications from competitors or similar industries may be declined. *Inquiries: Otsuka Shokai Co., Ltd. Seminar Office (ai-datasuishin@otsuka-shokai.co.jp)

We will hold the first technical seminar on lightweight embankment construction methods and glass foam recycled materials in Sendai City, Miyagi Prefecture. Registration is limited to the first 126 applicants. "Technical Seminar on Lightweight Embankment Construction Methods and Glass Foam Recycled Materials" 【Program】 1. Lightweight Embankment Construction Method (1) What is lightweight embankment material? (2) Information on lightweight embankment materials (3) Application range (4) Construction achievements (5) Workability 2. Glass Foam Recycled Materials (1) What are glass foam recycled materials? (2) Features (3) Design soil constants (4) Considerations for design and construction (5) Application examples On February 12, 2027 (Friday), the "Technical Seminar on Lightweight Embankment Construction Methods and Glass Foam Recycled Materials" will be held at the Sendai Conference Center, 8th Floor, 2-2-10 Chuo, Aoba-ku, Sendai City, Miyagi Prefecture, as a CPD accredited program by the Japan Society of Civil Engineers (2.7 units). As there are only 126 spots available, please register early. For details and registration, please refer to the attached file.

CIC Corporation will be exhibiting at 'EdgeTech+2026' held at Pacifico Yokohama. At the CIC booth, we will showcase the meter remote automatic reading system [XQC series] with actual equipment. We sincerely look forward to your visit.