International Powder Technology Exhibition Tokyo 2022 (Powtex 2022) will be exhibiting again this year!

Low wear and high durability crusher. Multi-purpose, high performance, and low price with over 10,000 units sold.

The "Makino Type Crusher DD Series" features a motor-directly connected rotating plate that reduces transmission loss, while also achieving cost reduction through simplified structure. The discs attached to the rotating plate are hardened, making them resistant to wear and providing excellent durability. Additionally, the shape of the discs has been modified from previous models to achieve further fine crushing. It can accommodate various raw materials such as ores, resins, gypsum, glass, and grains. 【Features】*For details, please refer to the catalog. ■ Achieved approximately 30% cost reduction (compared to our company) through structural simplification ■ No maintenance required for belt adjustments due to direct motor connection ■ Special cast steel used for discs extends the lifespan of consumables ■ Capacity increase can be achieved simply by replacing the motor ■ Consideration of disc arrangement reduces noise and airflow generation ■ Changing the rotation speed is easy with an inverter ◎ For more details, please refer to the PDF materials or feel free to contact us.

• Rock drills, demolition machines, and excavators

High-speed mixing of chemical products, resins, food, etc. A wide range of products in various sizes. Mixing tests are currently being accepted.

The "AVALONG High-Speed Mixer" mixes by stirring with rapidly rotating blades, allowing for high-precision mixing in a short time due to its powerful convection and diffusion effects. It can achieve over 2000 rotations per minute, preventing mixing inconsistencies. From a compact model with a total capacity of 15L to a large model of 1500L, you can choose from a wide range of products to meet your needs. It can be utilized for various purposes such as mixing, dispersing, drying, granulating, and surface modification. 【Features】 ■ Liquid addition during mixing is possible ■ Heating and cooling control through a jacket structure ■ Minimal internal residue, making it easy to clean by opening the lid ■ Standard two-stage blades are incorporated, and it can also accommodate four-stage blade specifications *You can view product materials from the "PDF Download" section. ★ Mixing tests with your desired raw materials are possible. (Please prepare the raw materials) For more details, feel free to contact us.

• others

A unique classifier that carries powder particles on an air flow and passes them through a screen.

To classify powder particles into the required sizes (a process called classification), there are generally two methods: using a screen (sieve) and utilizing differences in specific gravity to classify with air (air classifier). It is not feasible to achieve 100% or a mixing ratio of 0% with an air classifier, and vibration-type sieves are not suitable for large-scale processing due to issues like clogging. The "Micro Shifter" is a unique classifier that allows powder particles to pass through a screen by riding on an air flow. The newly developed fan-less type (NF type) incorporates a specific gravity separation mechanism, achieving higher precision classification. The "Air Jet Sieve Particle Size Analyzer" measures down to a minimum of 20μ using dedicated JIS standard sieves. 【Features】 ■ High precision classification and separation ■ Can process easily agglomerated fine powders ■ Can handle adhesive powders ■ High reliability due to screen type ■ Screen replacement is easy with one touch ■ Internal cleaning is simple ■ Minimal vibration ■ Can also be used for removing foreign substances such as hair and debris from powders, as well as removing powder from particles ● For more details, please contact us or download the catalog.

• Aggregates and crushed stone

Crush powerfully with a small motor! Ideal for coarse crushing across a wide range of applications from ores to food and chemicals.

The "Hammer Crusher" is a coarse crusher that powerfully crushes large raw materials. The hammer pins attached to the rotor stand upright due to the centrifugal force of high-speed rotation, and the tips of the hammers deliver a large impact force at maximum peripheral speed, crushing lump, sheet, and granular raw materials to about a few millimeters. When the hammer strikes hard or difficult-to-crack materials, it swings and delivers repeated impacts, allowing for a large crushing capacity with a small motor compared to crushing all at once with fixed hammers. The product particle size is determined by the rotation speed of the hammers and the hole diameter of the attached screen.

• Rock drills, demolition machines, and excavators

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html