[Mechanical Design] Submission on "Latest Trends in Motor Magnetic Design"

Publication of an explanation of vector magnetic characteristic analysis technology for the realization of high-efficiency motors!

This document explains the vector magnetic characteristic analysis technology for achieving high-efficiency motors. This technology is supported by Professor Masato Enokizono (Emeritus Professor at Oita University, currently the representative of the Vector Magnetic Characteristic Technology Research Institute), and we have cited information from the Vector Magnetic Characteristic Technology Research Institute, which the professor leads. [Contents] 1. The target is the reduction of iron loss in electromagnetic steel sheets. 2. Iron loss is the sum of eddy current loss and hysteresis loss. 3. Vector magnetic characteristics of electromagnetic steel sheets. 4. Conventional measurements are scalar magnetic measurements. 5. Developed vector magnetic measurements. 6. Actual measurement results. 7. Database creation as magnetic characteristics. *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software

Supports low loss and high efficiency of EV motors! Capable of analyzing rotating magnetic fields and hysteresis.

"μ-E&S" is a iron loss analysis software that can simulate magnetic flux density, magnetic field, and iron loss distribution based on actual measurements of motor laminated cores. By analyzing vector magnetic characteristics, it can identify areas where iron loss occurs significantly, making it a useful analysis tool for reducing the size and weight of motors as well as for achieving low loss and high efficiency. 【Features】 ■ High-precision calculation of magnetic vectors ■ Capable of calculating rotating magnetic fields and hysteresis ■ Equipped with permanent magnet excitation function and torque calculation function *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Scientific Calculation and Simulation Software

Published on vector magnetic characteristic analysis technology for achieving high-efficiency motors!

This document is a technical column edited and compiled based on the content related to "Vector Magnetic Characteristic Analysis" mentioned in past newsletter columns. We would like to disseminate information on the importance of vector magnetic characteristic analysis technology for achieving high-efficiency motors. [Contents] ■1. Vector Magnetic Characteristic Analysis Technology - Prologue - ■2. Top Runner Method and IE4 ■3. Inverter Technology and Energy Saving ■4. Will Increasing Size Lead to IE3? ■5. Electrical Steel Sheets are Excellent ■6. Focus on the Vector Magnetic Characteristics of Electrical Steel Sheets *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

A basic analysis example aimed at the iron loss distribution of SPM (Surface Permanent Magnet) motors is presented!

This document presents a basic analysis example aimed at the iron loss distribution of SPM (Surface Permanent Magnet) motors. It provides a detailed explanation of the analysis model and objectives, as well as the magnetic flux lines, magnetic field distribution, and iron loss distribution results. [Contents] ■4.1 Analysis Model and Objectives ■4.2 Analysis Conditions and Calculation Time ■4.3 Magnetic Flux Lines, Magnetic Field Distribution, Iron Loss Distribution Results ■4.4 Results of Inclination Angle θB and Aspect Ratio α Distribution ■4.5 X-Direction Hysteresis Curve Results ■4.6 Y-Direction Hysteresis Curve Results ■4.7 Lissajous Waveform Results ■4.8 Current Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a transformer model with directional materials is published!

This document presents an analysis example using a transformer model with directional materials. It provides detailed explanations of the analysis model and objectives, as well as the results of magnetic flux lines, magnetic field distribution, and iron loss distribution. [Contents] ■3.1 Analysis Model and Objectives ■3.2 Analysis Conditions and Calculation Time ■3.3 Results of Magnetic Flux Lines, Magnetic Field Distribution, and Iron Loss Distribution ■3.4 Results of Angle θB and Aspect Ratio α Distribution ■3.5 Results of Hysteresis Curve in the X Direction ■3.6 Results of Hysteresis Curve in the Y Direction ■3.7 Results of Lissajous Waveform ■3.9 Results of Current Waveform *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a model of non-oriented electrical steel sheet shaped into a ring is presented!

This document presents an analysis example using a model of isotropic electromagnetic steel plates shaped into a ring. It provides detailed explanations about the ring model voltage source (differences in steel materials), magnetic field distribution, and iron loss distribution results. 【Contents】 ■2.1 Analysis Model and Objectives ■2.2 Analysis Conditions and Calculation Time ■2.3 Magnetic Field Distribution and Iron Loss Distribution Results ■2.4 X-Direction Hysteresis Curve Results ■2.5 Y-Direction Hysteresis Curve Results ■2.6 Current Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a model of non-oriented electrical steel sheet shaped into a ring is presented!

This document presents an analysis example using a model of isotropic electromagnetic steel plates shaped into a ring. It provides a detailed explanation of the ring model voltage source, as well as comparison results with measured hysteresis curves. 【Contents】 ■1.1 Analysis Model and Objectives ■1.2 Analysis Conditions and Calculation Time ■1.3 Magnetic Field Distribution and Iron Loss Distribution Results ■1.4 Alternating Magnetic Flux and Rotating Magnetic Field Results ■1.5 Comparison Results with Measured Hysteresis Curves ■1.6 Current Waveform Results ■1.7 Interface Settings Screen *For more details, please refer to the PDF document or feel free to contact us.*

• Other Software

Aiming for low loss, accurately measure the actual state of electromagnetic materials and understand and analyze their vector magnetic characteristics! Supporting low loss and high efficiency for motors used in EVs.

This is an introduction to the next-generation iron loss evaluation method, the "E&S Model." Based on an evaluation method called vector magnetic characteristics, it has become possible to obtain a more detailed loss distribution of steel materials as analysis results compared to conventional methods. It can calculate high-precision magnetic fields, magnetic flux densities, and iron loss distributions that are not achievable with other software. 【Features】 - By considering vector magnetic characteristics, magnetic vectors can be calculated with high precision. - Rotating magnetic fields and hysteresis can be calculated. - Finished as an easy-to-use tool specifically for iron loss evaluation. - Permanent magnet excitation function and torque calculation function. *For more details, please contact us or download the PDF.

• Scientific Calculation and Simulation Software

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

PERI products are used at construction sites around the world. This time, we would like to introduce the construction work of the "Dunajec Road Bridge" spanning the Dunajec River in the town of Nowy Targ in southern Poland. The road bridge was planned to be constructed using a balanced cantilever method, dividing the cantilever beams starting from each pier into 10 segments. A particular concern was to strictly adhere to the concrete pouring cycle for each segment. To achieve this, a balanced cantilever carriage (VBC) equipped with a hydraulic advance system and an automatic formwork stripping function was adopted. By utilizing the VBC, it became possible to pour concrete for segments up to a maximum length of 5 meters in a single cycle, allowing for efficient and timely construction. PERI products: 1. TRIO Panel Formwork 2. VARIO GT24 Wall Formwork 3. PERI UP Flex Modular Scaffold 4. VST Heavy-Duty Shoring Tower PERI Japan Co., Ltd.

At a major purchasing specialty store located in Kanagawa Prefecture, we have introduced our commercial aroma diffuser rental service "MajestaFragrance," enhancing the store's atmosphere with fragrance. Installed models: MFmini (4,400 yen per month) × 2 units Adopted fragrance: Freesia Pear To ensure that customers visiting the store can relax during their appraisal and consultation time, we have implemented space branding with a "refined and approachable scent." The fragrance used is "Freesia Pear," which pleasantly spreads the freshness of fruity pear and the vibrant aroma of freesia. It warmly welcomes customers with a clean and high-quality scent. The "MFmini" introduced this time is a compact yet powerful diffuser known for its strong diffusion capabilities. It blends smartly into limited installation spaces such as reception counters and customer service areas, efficiently delivering fragrance. At Majesta Fragrance, we offer optimal diffuser models and fragrance suggestions tailored to the size of the store, type of business, and interior atmosphere. A "free trial installation" is also available before signing a contract.

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.