Vibration Meter - 企業ランキング(全14社)
更新日： 集計期間:Jul 09, 2025〜Aug 05, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
企業情報を表示
| 会社名 | 代表製品 | ||
|---|---|---|---|
| 製品画像・製品名・価格帯 | 概要 | 用途/実績例 | |
| ■Features ● It can measure in three modes: acceleration, velocity, and displacement. Additionally, high-precision measurements are possible by switching between Hi and Lo ranges. ● When the measurement exceeds the upper limit, an [OVER] display appears, enhancing data reliability. ● Lightweight and ultra-thin, approximately 2cm thick. ● Easy to operate with one hand. ● Wide frequency range and measurement range. ● For acceleration measurements, there is a range with a low-pass filter that cuts unnecessary high-frequency components. ● Equipped with a max hold function, allowing measurements tailored to specific applications. ● Large digital display for easy reading. ● Standard AC and DC outputs are included. ● By incorporating a preamplifier within the pickup, noise caused by cable movement has been eliminated. ● The use of a shear-type pickup prevents the output of pyro noise. | ■Specifications Built-in amplifier shear type TYPE2505 Sensitivity 10mV/m・s-2 Resonant frequency 20kHz Frequency range and measurement range Acceleration (ACC1) 10～6000Hz Acceleration (ACC2) 10～300Hz Hi: 0.5～199.9m/s2 Lo: 0.05～19.99m/s2 Velocity (VEL) 10～1000Hz Hi: 0.5～199.9m/s Lo: 0.05～19.99m/s Displacement (DIS) 10～1000Hz Hi: 10～1999μm Lo: 1～199.9μm Display method Acceleration/Velocity Single amplitude (1/2P-P) Displacement Double amplitude (P-P) Digital display 3・1/2 digits Detection method RMS detection Measurement mode Instantaneous value and maximum value hold Power supply Two AA batteries (SUM-3) (AC adapter for AC100V: optional) Usage time Approximately 38 hours with alkaline batteries Dimensions and weight Main unit Approximately 200g, 72(W)×220(H)×24(D)mm | ||
| Frequency range 10Hz - 1kHz, sensitivity meets ISO 2954. Specialized vibration meter supplied with vibration sensor & magnetic base (full set). Measures speed up to 200mm/s. Acceleration measurement range 200m/s². RMS & peak measurements. Wide frequency range. Data hold function to freeze desired readings. Memory function records maximum and minimum readings. Very large LCD display. Microcomputer circuit, high performance. Automatic shut-off to conserve battery life & built-in low battery indicator. | Digital Vibration Meter | ||
| In the event of an abnormal occurrence and increased vibration in industrial machinery, a vibration meter that performs a simple diagnosis to determine abnormal or normal conditions. ■□■Features■□■ ■A handheld vibration analyzer suitable for machine vibration analysis and equipment diagnosis. ■Vibration meter mode capable of simultaneous measurement of acceleration, velocity, displacement, and wave height ratio, along with FFT mode that allows time waveform display and spectrum display with frequency analysis of up to 3200 lines. ■Adopts a TFT color LCD (240×320 dots) for the display, offering excellent visibility in various environments such as outdoors, indoors, and dark places. ■Real-time frequency of 20KHz. Maximum dynamic range of 110 dB through 24-bit A/D conversion. ■Includes a piezoelectric acceleration pickup (with magnetic attachment). ■Uses an SD card as the memory medium. ■Waveform analysis software is also available (optional). ■For other functions and details, please download the catalog or contact us. | ■□■Applications■□■ ■Analysis of machine vibrations ■Equipment diagnostics, etc. | ||
|
---
--- |
--- | --- | |
シロ産業
-
- 代表製品
-
Digital Vibration Meter (with Analog Output) / Part Number M1552TP-2098S
- 概要
- ■Features ● It can measure in three modes: acceleration, velocity, and displacement. Additionally, high-precision measurements are possible by switching between Hi and Lo ranges. ● When the measurement exceeds the upper limit, an [OVER] display appears, enhancing data reliability. ● Lightweight and ultra-thin, approximately 2cm thick. ● Easy to operate with one hand. ● Wide frequency range and measurement range. ● For acceleration measurements, there is a range with a low-pass filter that cuts unnecessary high-frequency components. ● Equipped with a max hold function, allowing measurements tailored to specific applications. ● Large digital display for easy reading. ● Standard AC and DC outputs are included. ● By incorporating a preamplifier within the pickup, noise caused by cable movement has been eliminated. ● The use of a shear-type pickup prevents the output of pyro noise.
- 用途/実績例
- ■Specifications Built-in amplifier shear type TYPE2505 Sensitivity 10mV/m・s-2 Resonant frequency 20kHz Frequency range and measurement range Acceleration (ACC1) 10～6000Hz Acceleration (ACC2) 10～300Hz Hi: 0.5～199.9m/s2 Lo: 0.05～19.99m/s2 Velocity (VEL) 10～1000Hz Hi: 0.5～199.9m/s Lo: 0.05～19.99m/s Displacement (DIS) 10～1000Hz Hi: 10～1999μm Lo: 1～199.9μm Display method Acceleration/Velocity Single amplitude (1/2P-P) Displacement Double amplitude (P-P) Digital display 3・1/2 digits Detection method RMS detection Measurement mode Instantaneous value and maximum value hold Power supply Two AA batteries (SUM-3) (AC adapter for AC100V: optional) Usage time Approximately 38 hours with alkaline batteries Dimensions and weight Main unit Approximately 200g, 72(W)×220(H)×24(D)mm
Digital Vibration Meter / Model Number M2995T-4909S
- 概要
- Frequency range 10Hz - 1kHz, sensitivity meets ISO 2954. Specialized vibration meter supplied with vibration sensor & magnetic base (full set). Measures speed up to 200mm/s. Acceleration measurement range 200m/s². RMS & peak measurements. Wide frequency range. Data hold function to freeze desired readings. Memory function records maximum and minimum readings. Very large LCD display. Microcomputer circuit, high performance. Automatic shut-off to conserve battery life & built-in low battery indicator.
- 用途/実績例
- Digital Vibration Meter
Vibration meter MI11A-12R
- 概要
- In the event of an abnormal occurrence and increased vibration in industrial machinery, a vibration meter that performs a simple diagnosis to determine abnormal or normal conditions. ■□■Features■□■ ■A handheld vibration analyzer suitable for machine vibration analysis and equipment diagnosis. ■Vibration meter mode capable of simultaneous measurement of acceleration, velocity, displacement, and wave height ratio, along with FFT mode that allows time waveform display and spectrum display with frequency analysis of up to 3200 lines. ■Adopts a TFT color LCD (240×320 dots) for the display, offering excellent visibility in various environments such as outdoors, indoors, and dark places. ■Real-time frequency of 20KHz. Maximum dynamic range of 110 dB through 24-bit A/D conversion. ■Includes a piezoelectric acceleration pickup (with magnetic attachment). ■Uses an SD card as the memory medium. ■Waveform analysis software is also available (optional). ■For other functions and details, please download the catalog or contact us.
- 用途/実績例
- ■□■Applications■□■ ■Analysis of machine vibrations ■Equipment diagnostics, etc.
-
シロ産業
すべてを閲覧するには会員登録（無料）が必要です。
すでに会員の方はこちら
