新コスモス電機 List of Products and Services

The "Fire Alarm Kid KA-262E" is a heat-sensing residential fire alarm with a battery life of 10 years (under normal usage conditions). It comes with a stop switch (which also serves as a test switch) and notifies you of low battery voltage and sensor abnormalities through lights and sound. Additionally, being battery-operated means no electrical work is required, allowing for easy installation on either walls or ceilings. 【Features】 ■ Notifies the status of the device in addition to alarms through lights and sound ■ Easy-to-understand audio ■ Approximately 10-year battery life (under normal usage conditions) ■ Easy installation ■ Equipped with an automatic test function *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "Fire Alarm-kun SA-262E/265E" is a residential fire alarm (smoke type) that quickly detects fires and notifies you with voice alerts. It is battery-operated, requiring no wiring, and can be easily installed on either walls or ceilings. In addition to alarms, it informs you of the device's status through lights and voice. It also features an automatic testing function that alerts you to abnormal sensitivity decreases or increases. 【Features】 ■ In addition to alarms, it informs you of the device's status through lights and voice ■ Easy-to-understand voice ■ Battery life of approximately 10 years (under normal usage conditions) ■ Easy installation ■ Automatic testing function included ■ Sensitivity correction function included *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "SA-182E" is a stylish smoke detection residential fire alarm that harmonizes with interior design. It notifies you of alarms as well as the device's status through clear sounds and a red lamp. Additionally, being battery-operated means no electrical work is required, and the circular mounting base allows for angle adjustments after installation. 【Features】 ■ Slim, compact, and stylish design ■ Warning sound is easily audible at a maximum of approximately 90dB (A)/m ■ Alarm notifications via lamp and voice ■ Equipped with a stop switch (also serves as a test switch) ■ Battery-operated, requiring no electrical work ■ Angle adjustments possible after installation with the circular mounting base *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XP-329m" is a portable odor sensor that allows for easy and simple measurement of "smell." It is equipped with a unique sensor that excels in repeatability and is less likely to react to odorless gases. Weighing approximately 300g, it features a compact and lightweight design for convenient portability. Additionally, it displays the intensity of odors in real-time as digital values ranging from "000" to "999." 【Features】 ■ Equipped with a unique sensor that excels in repeatability ■ Compact and lightweight design for easy handling ■ Eco-friendly design ■ Easy measurement initiation with only base adjustment ■ Immediate display of odor intensity in digital numbers *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XP-704III" is a compact body alternative refrigerant gas detector that has significantly reduced size and weight compared to conventional models, fitting comfortably in your hand. As the gas concentration changes, the speed of the alarm sound (intermittent tone) gradually changes, and when it reaches a high concentration, it alerts with a continuous tone, making it easy to pinpoint the location of the gas leak. It is equipped with an easy-to-read LCD screen that displays the status of the device, such as battery level and pump condition. 【Features】 ■ Compact body that fits in your pocket ■ Compatible with almost all refrigerants ■ Capable of detecting trace amounts of gas ■ Alarm lamps located in two places ■ Easy-to-understand LED screen *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "SDM-73" is a suitable density meter for the maintenance management of oil-lubricated machinery. It can easily diagnose the wear condition of bearings from ultra-low speed machines (below 100 rpm) to high-speed machines. It can detect trace amounts with a minimum resolution of 1 ppm (Wt), and measurement is simple by just inserting the sample oil. 【Features】 ■ Understand the wear condition before the vibration levels increase ■ Effective for bearing diagnosis in low-speed and variable-speed machines ■ The only running cost for measurement is the battery cost ■ Easy measurement by simply inserting the sample oil ■ Portable, allowing for measurements on-site ■ Capable of detecting trace amounts with a minimum resolution of 1 ppm (Wt) *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "SDM-72" is a suitable density meter for the maintenance management of grease-lubricated machinery. By measuring the metal wear particles contained in the grease within the bearings, it is possible to confirm the wear condition before the vibration levels increase. The running cost for measurements is only the cost of batteries, and it can be easily measured by simply inserting the sample grease. 【Features】 ■ Understand the wear condition before the vibration levels increase ■ Effective for diagnosing bearings in low-speed and variable-speed machines ■ The running cost for measurements is only the cost of batteries ■ Easy to measure by simply inserting the sample grease ■ Portable, allowing for measurements on-site ■ Capable of detecting minute quantities with a minimum resolution of 0.001% (Wt) *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XV-389" is a personal exposure concentration meter with data logging capabilities. You can select the target substance from 17 types of chemicals, including toluene. When the concentration of the selected substance in the air reaches the alarm levels (TWA, STEL), it will notify you with a buzzer or lamp. Additionally, you can check the instantaneous value, average value, TWA value (time-weighted average), and STEL value (short-term exposure limit) of the chemical concentration in real-time. 【Features】 ■ Suitable for chemical risk assessment ■ Supports 17 types of chemicals, including toluene ■ Compact, lightweight, and low-cost ■ Built-in NFC for easy data reading ■ Equipped with data logging functionality *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XP-3120-V" is a VOC real-time monitor suitable for chemical risk assessment. It is compact, lightweight, easy to hold, and simple to operate. It clearly displays the measured concentration with a digital bar graph and digital numbers. 【Features】 ■ Easy operation ■ Clear dual concentration display ■ Usable in explosion-proof areas ■ Ideal for chemical risk assessment *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XP-329IIIR" is a portable odor sensor that can instantly display the strength of odors in digital numbers. It allows for switching between "level display" of odor strength and "odor index (equivalent value)" measurement method. It is equipped with a data memory function that allows you to retrieve stored data to a computer using dedicated software. Additionally, by incorporating an activated carbon filter for base adjustment, manual zero base setting is unnecessary. 【Features】 ■ Measurement is possible approximately one minute after power on ■ A single switch allows for switching between real-time continuous monitoring mode and batch measurement mode for one minute ■ The sensor's status is displayed on a bar graph on the screen ■ Maintenance timing can be checked at your convenience *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The XOS-326 is a sensor-separation type oxygen and hydrogen sulfide concentration meter equipped with a standard 5m sensor extension cable. It can simultaneously measure both oxygen and hydrogen sulfide gases, and the concentration display can be easily switched by pressing a button. Leveraging the advantages of the separation type, it is active in various fields for pre-safety checks and ensuring the safety of workers. 【Features】 ■ Sensor separation type with a standard 5m sensor extension cable ■ Simultaneous detection and display of oxygen and hydrogen sulfide ■ Measurement concentration displayed in large digital numbers ■ Alarm notification via lamp and buzzer ■ Low battery voltage notification via buzzer *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XOS-353II" is an oxygen and hydrogen sulfide meter that can simultaneously detect and display both gases. It features a loud buzzer (over 95dB at 10cm) that is easy to hear even in noisy environments, along with four indicator lamps and vibration alerts. With an IP54-rated waterproof and dustproof structure, it can be continuously used for approximately 5,000 hours on a single AA alkaline battery. 【Features】 ■ Pocket-sized to protect workers ■ Simultaneous detection and display of oxygen and hydrogen sulfide ■ Alerts through a loud buzzer, four indicator lamps, and vibration ■ Approximately 5,000 hours of continuous use on a single AA alkaline battery ■ Waterproof and dustproof structure (IP54 rated) *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XOC-353II" is a pocket-sized oxygen and carbon monoxide meter that protects workers. It can simultaneously detect and display oxygen and carbon monoxide levels, and it alerts users with a loud buzzer sound (over 95dB at 10cm), four indicator lights, and vibrations, making it easy to hear even in noisy environments. Additionally, we offer the oxygen and hydrogen sulfide meter "XOS-353II," the carbon monoxide meter "XC-353II," and the oxygen meter "XO-353II." 【Features】 ■ Pocket-sized oxygen and carbon monoxide meter that protects workers ■ Simultaneous detection and display of oxygen and carbon monoxide ■ Loud buzzer sound (over 95dB at 10cm) and alerts through four indicator lights and vibrations, easily heard in noisy environments ■ Approximately 5,000 hours of continuous use with one AA alkaline battery *Under no alarm conditions at 25°C ■ Waterproof and dustproof structure (equivalent to IP54) ■ CO cumulative concentration display function and peak hold function included *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XP-302M" is a multi-gas detector that can simultaneously measure and display four types of gases: oxygen, flammable gases, hydrogen sulfide, and carbon monoxide. It features a sensor unit exchange system that reduces maintenance time and costs. An easily noticeable buzzer and lamp alert users to alarms. It can be used for various applications, including routine inspections in factories, safety checks before work in tanks, manholes, tunnels, and ensuring the safety of workers during underground construction. 【Features】 ■ Loud and noticeable alarm sound and alarm lamp ■ Reduced maintenance burden with sensor unit exchange system ■ External alarm unit (with 8m cable) can also be connected ■ Large and easy-to-read simultaneous display of 4 gases ■ Data recording capability ■ Lightweight and compact ■ 3-gas type also available *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XA-4000II Series" is a multi-type gas detector that can simultaneously measure and display up to four types of gases: oxygen, flammable gases, hydrogen sulfide, and carbon monoxide. The battery is unit-based and can be powered by easily available AA alkaline batteries or rechargeable nickel-metal hydride batteries, offering a 2-way power option. The impact resistance has been significantly improved compared to our previous models, and it features a dustproof and waterproof structure that prevents dust and water from entering the device, ensuring it won't break even when used in rainy conditions or near water. 【Features】 ■ Sensor lifespan of 2 years ■ Unit-based with a selectable 2-way power supply ■ Operates for one week on a single battery ■ Significantly improved impact resistance ■ Loud alarm, lamp, and vibration for alerts *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XP-703DIII" is a compact body semiconductor material gas detector that fits comfortably in your hand. It can detect various semiconductor material gases such as arsine, phosphine, diborane, silane, and hydrogen all in one device. It can detect even trace amounts of gas, ensuring that no leakage points are missed. Additionally, it is equipped with an "automatic gas exhaust mode" function, which automatically exhausts gas from the device to prevent adverse effects on the sensor. 【Features】 ■ Compact body that fits comfortably in your hand ■ Capable of detecting various semiconductor material gases in one device ■ Can detect trace amounts of gas ■ Equipped with alarm lamps in two locations ■ Features an easy-to-understand LCD screen *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XPS-7II" is one of the world's smallest portable gas detectors that supports NF3 detection. The sensor unit can be exchanged according to the gas, allowing a single device to detect various semiconductor material gases. Additionally, calibration of the gas detector is not required, significantly reducing maintenance time and costs. 【Features】 ■ One of the world's smallest portable gas detectors that supports NF3 detection ■ No calibration required for the gas detector ■ Significant reduction in maintenance time and costs ■ Ability to change target gases ■ LCD display function with a large, easy-to-read digital LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XC-353II" is a pocket-sized carbon monoxide detector that protects workers. It features a color LCD display that enhances visibility during alarms. It alerts users with a loud buzzer sound (over 95dB at 10cm), four indicator lamps, and vibrations, making it easy to hear even in noisy environments. Additionally, we offer the oxygen and hydrogen sulfide meter "XOS-353II," the oxygen and carbon monoxide meter "XOC-353II," and the oxygen meter "XO-353II." 【Features】 ■ Pocket-sized carbon monoxide detector that protects workers ■ Loud buzzer sound (over 95dB at 10cm) and four indicator lamps, along with vibrations to alert users even in noisy environments ■ Approximately 5,000 hours of continuous use with one AA alkaline battery 　※ Under non-alarm conditions at 25°C ■ Waterproof and dustproof structure (equivalent to IP54) ■ Equipped with CO cumulative concentration display function and peak hold function *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XO-326IIs" is a digital oxygen meter suitable for safety checks before working in areas at risk of oxygen deficiency. It measures oxygen concentrations from 0 to 25 vol% and can be continuously used for approximately 15,000 hours with two AA alkaline batteries. After powering on, it features an automatic air adjustment function that automatically calibrates to 21.0 vol%. It alerts users with sound and lights, while simultaneously illuminating the backlight of the LCD screen. 【Features】 ■ Approximately 15,000 hours of continuous use ■ Equipped with automatic air adjustment function ■ Easy-to-understand alarm function ■ Large LCD screen for clear visibility ■ Sensors can be easily replaced by the customer, reducing running costs ■ Compliant with JIS T 8201: 2010 for oxygen deficiency measurement *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XP-702IIIS" is a combustible gas detector equipped with a lighting lamp that illuminates the front, allowing you to identify measurement points even in dark places. The speed of the alarm sound (intermittent sound) gradually changes in response to changes in gas concentration, and when it reaches a high concentration, it alerts you with a continuous sound, making it easy to pinpoint the location of a gas leak. It features an easy-to-read LCD screen that displays the status of the device, including battery level and pump condition. 【Features】 ■ Convenient for work in dark places with the built-in lighting lamp ■ Compact and lightweight for excellent workability ■ Capable of detecting up to two types of gas with one unit ■ Can detect trace gas leaks as low as 10 ppm (30 ppm for refrigerant gases) ■ Equipped with an automatic pump stop function *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The "XA-380s" is a pocket-sized combustible gas detector that protects workers. With an alkaline battery specification, it can be used continuously for about 34 hours with one AA battery, and with a rechargeable battery specification, it can be used for about 40 hours. It can display up to 30 records of gas alarms (during alarm, peak, and stop), making it suitable for supervisors to ensure safety. 【Features】 ■ Choose between battery-operated or rechargeable power types ■ Capable of long continuous use ■ Alerts gas leaks with alarms, lights, and vibrations ■ Ultra-compact and lightweight at only 63g ■ Alarm history display function included ■ Intrinsically safe explosion-proof structure Ex ia IIC T3 *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection