フジテックス List of Products and Services

The warm water high-pressure suction cleaning system removes and recovers stubborn dirt with a maximum discharge pressure of 20 MPa and a discharge water flow rate of 16 L/min. It is capable of cleaning and recovering 100 to 150 m² per hour. The recovered cleaning wastewater can be separated into treated water and settled sludge by adding a coagulant and stirring it before letting it sit. It features a powerful and durable diesel engine, safety devices such as a thermoswitch and float switch, and a centralized control panel and hose connection for safe and easy operation. A lock-type panel is used to allow for emergency maintenance without special tools. The engine radiator and power exhaust, along with double heating, achieve high efficiency, and by centralizing the cleaning process, it contributes to reduced work time and fewer personnel. For more details, please contact us.

• pump

We handle open types with removable lids, closed types without removable lids, as well as stainless steel, inner-coated types, and small sizes under 100 liters.

• others

For kneading and granulation processing of dehydrated cakes, powders, etc.! For kneading that adds crushing to the materials! When you want to quickly stir and create a kneaded product!

• Earthworks

We focused only on the necessary features and created a simple structure. As a result, it is an easy-to-use, durable, and cost-effective flexible container scale.

• Weighing scale

It can also be used as a pretreatment to reduce the burden on existing wastewater treatment facilities.

• Water Treatment Plant

It is a biomass power plant that generates electricity using organic waste such as food scraps.

• others

There is a test machine that is close to the actual delivery machine, allowing for checks on the drying condition and estimates of running costs. It is a rotary dryer for biomass and sludge.

• others

The main body of the dryer performs crushing and drying simultaneously, resulting in a simple and compact system. It can operate continuously in batch mode for 24 hours.

• others

Processing capacity from 2.0 tons (extraction amount 0.6 tons) to 6.0 tons (extraction amount 1.5 tons) is available in the lineup. For more details, please contact us below.

• others

Increased selling price per unit; less prone to scattering, ideal for machine spreading. You can produce popular pellet compost.

• others

You can effectively utilize solid fuel made from thinning wood, construction waste, wood processing offcuts, as well as waste plastics and paper scraps. In addition to being compact since it does not require equipment such as fireproof bricks, we offer a wide range of products from home hot water types with a maximum heat output of 10,000 kcal to commercial types with 500,000 kcal.

• others

This is a wood pellet molding machine for materials such as cedar, European red, kenaf, bamboo powder, oil cake + sawdust, and planer shavings. It can also be used as a pellet molding machine for other materials like chicken manure, cow manure, rice husks, and compost.

• others

We manufacture pellets with a shape and moisture content that are always stable. The manufacturing machine and the metering feeder are driven by inverter control, allowing for easy adjustment of the input and production amounts according to the type of material. The feeding amount of the metering feeder is automatically controlled based on the properties of the material, maximizing production capacity.

• others

We conduct chlorine testing of waste plastics using the X-ray fluorescence method. It is ideal for chlorine testing of plastics used as RPF materials and RPF molded products.

• others

It can be used in various places such as supermarkets, convenience stores, bento factories, noodle factories, food factories, and tofu factories. It also helps reduce waste.

• others

It can be streamlined.

• others

●Please contact us for more details.

• others

Equipped with a cleaning function, it separates organic waste and packaging materials. It is also capable of separating contents from items like canned goods and plastic bottles. There are numerous delivery records for municipalities that require long-term durability! It can also separate metal knives, forks, spoons, ceramics, and other items mixed in with garbage bags.

• others

It comes with a shower ring function for cleaning the compressed blocks at the discharge section.

• others

It is possible to recover rare metals and convert waste gypsum into semi-hydrated gypsum.

• others

It is possible to sort light metals such as aluminum and magnesium from mixtures of heavy metals like copper, brass, zinc, and lead. Additionally, it is also possible to sort PVC from mixed plastics and stones from wood chips. Therefore, not only can copper, zinc, and brass be sorted, but plastic sorting and substrate recovery can also be performed.

• others

Not only can we sort copper, zinc, and brass, but we can also sort plastics and recover circuit boards.

• others

The work that was done through manual sorting can be eliminated, resulting in a reduction in labor costs.

• others

It can be installed on special vehicles such as overhead cranes, backhoes, and unic trucks. We will manufacture it to match various attachments. Power will be supplied from a generator for backhoes and similar equipment. We also design special and lightweight types. In addition to those listed, we have a wide range of products available. Please contact us for more details.

• Crane and others

We assist in safely and quickly inverting drums to facilitate the pouring of contents.

• others

This is a drum car with a load capacity of 300 kg.

• others

Maximum load: 1 ton to 1.5 tons.

• others

It is a lift that raises and lowers heavy objects manually with a handle and moves them.

• others

In addition to horizontal transport, vertical lifting up to 1500mm is also possible.

• others

You can manually transport heavy objects weighing around 1 ton.

• others

It is a hand lift equipped with a scale that measures in 1 kg increments.

• others

The Mix metal sorting device "NES" Linear can sort non-ferrous materials of extremely small sizes (minimum 5mm). Since iron does not adhere to the drum, it minimizes wear on the drum and belt compared to conventional linear sorting machines.

• others

The magnetic separator is suspended above a belt conveyor, attracting magnetic materials such as iron powder from the transported raw materials and continuously discharging them via the belt for sorting. It uses permanent magnets, eliminating the need for magnetization power and making it energy-efficient. It can also be used outdoors.

• others

The magnetic separator is suspended above a belt conveyor, attracting magnetic materials such as iron powder from the transported raw materials and continuously discharging them via the belt for sorting. The standard belt material is wear-resistant rubber, and it can also be customized to special specifications such as oil-resistant rubber or armored types. It comes with one dedicated control panel and bolts for suspension. There is also a version that uses permanent magnets.

• others

It has a simple structure that can be used as a workbench, allowing you to work in a comfortable posture. Moreover, it has a high sorting rate.

• others

It is suitable for sorting aluminum cans mixed with PET bottles and glass bottles. By using it in conjunction with a vibrating feeder, it is possible to supply materials in a quantitative manner and enhance sorting efficiency. It comes with a dedicated control panel and uses a hyponic motor for belt drive. In addition to the listed models, we have a wide range of aluminum sorting machines available. For more details, please contact us.

• others

It is a high-speed processing type with a capacity of 500 kg per hour.

• others

By installing the sorting table (optional), the sorting rate will improve.

• others

When recycling used small electronic devices, the Ministry of the Environment estimates that 27.5 billion yen worth of rare metals can be recycled. We efficiently and accurately sort components of electronic products such as plastics, non-ferrous metals, and copper wires.

• others

These are rubber gloves made with high-performance materials such as cut-resistant materials, aimed at preventing workplace accidents, ensuring safety at work sites, and reducing accidents. CE standard cut level: 4*. This is a European standard, ranging from 1 to 5, with higher numbers indicating greater cut resistance.

• others

We will respond to the increasing construction waste treatment and recycling needs. Depending on your desired specifications, we will design and manufacture a combination of crushers, screens, sorting conveyors, magnetic separators, etc. For more details, please contact us directly.

• others

For more details, please contact us.

• Wood processing

The rotation of the screen allows for sorting, classification, and volume reduction. It is ideal for the separation and sorting of food ingredients, feed, compost, and more. When combined with a vibrating conveyor, efficiency is further enhanced. It is compact, easy to use, and easy to move. It can also be used with a 100V household power supply, making it versatile for various locations.

• others

The compact design saves space. Additionally, it features an innovative method that makes cleaning with a cord easy. It has a large capacity and allows for shovel loading with a hopper. An apron conveyor for loading can also be added. Please consult us about expansions to existing lines.

• others

The two-axis rotating blade efficiently performs bag breaking. It is a high cost-performance type that keeps the price about half that of conventional products. By using the bag breaking machine, labor costs can be reduced and allocated to other tasks.

• others