伊藤彰産業 List of Products and Services

Can manufacturing frame - can manufacturing, sheet metal, welding 2000 x 4000

• Steel

Pinion shaft until press fit, approximately 300φ.

• Secondary steel products

Hot press parts More than 30 locations for gun drilling, with the upper and lower surfaces polished to Ra 0.2 or less.

• Secondary steel products

Generator motor cover Forging ~ Machining ~ (Welding, Painting)

• Secondary steel products

This is a part of cement manufacturing equipment. Casting of approximately φ1500×400 castings from foam type to casting, followed by key machining on a slitter after machining.

• Concrete Machinery
• Concrete construction

Ito Akira Industry leverages an overwhelming variety of steel types as its strength, offering advantages such as short delivery times and the convenience of ordering from just one piece due to its inventory. This document introduces examples of steel processing, including "laser processing" and "bevel processing," using photographs. It serves as a resource for hints on production. We encourage you to read it! ▼ About Processing Technology (Minimum 1 piece) Various cutting processes / Machining (drilling, milling, turning) / Laser cutting Water jet / BTA processing / Bending, bevel processing, welding / Heat treatment, plating *Due to inventory holdings, there is no purchase of scrap materials. ▼ Types of Steel Handled (Partial List) General steel materials, special steel, polished materials, quenched steel, cast iron, low thermal expansion alloys (Invar) Stainless steel, Swedish steel, high manganese steel, aluminum, brass, copper alloys, etc. ⇒ Rare steel materials are also in stock! ▼ Excerpts from Listed Examples (Total of 19 Cases) ■ [SNCM439 Processed Products] Ultra-special processing from round bar forging to wire cutting ■ [HARDOX500 Processed Products] Laser cutting + conical bending processing ■ [SS Pipe Processed Products] Band saw cutting + hot-dip galvanized treatment *Please feel free to contact us.

• Steel

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We handle quantities starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SNCM439 (Nickel-Chromium-Molybdenum Steel) Size: t110 Forged Product Processing Method: Round bar cutting + forging + cutting + heat treatment → Due to the cutting dimensions being too large, outer circumference + wire cutting Application: Material that will be processed into precision parts 【Processing Story】 ▶ The material is special and difficult to obtain, and the size is limited, so the required dimensions cannot be achieved. ▶ Therefore, the round bar is forged into a block shape to adjust the thickness, width, and length, and then the outer circumference is cut using cutting. ▶ Since there is further processing in the subsequent steps, heat treatment is performed to adjust the hardness of the material, making it easier to process. ▶ Normally, this would be the end of the process. ▶ However, there was a request to reduce the outer diameter dimension by 10mm, so it was cut using wire cutting, resulting in the product and leftover material as shown in the photo. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: HARDOX450 Application: Liner / Shooter Size: t4 Processing Method: Laser cutting + bending (conical bending) ⇒ Large products made of wear-resistant steel, no welding due to transportation constraints. Small items are made in two parts, and large items in four parts. 【Benefits of Processing at Our Company】 ▼ We always have a stock of wear-resistant steel available for immediate processing since we also sell steel materials. ▼ We can consistently handle laser and bending processing, enabling short delivery times. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company achieves short delivery times even for small lots of various types of steel materials due to the wide range of products we handle and our abundant inventory. We accept orders starting from just one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SS Pipe Size: φ60.5×t2.3×350 Processing Method: Band saw cutting + hot-dip galvanizing treatment (no hanging holes required for pipes) Application: Components for electrical equipment 【Benefits of Processing at Our Company】 ▼ High convenience as we can accommodate orders starting from one cut piece ▼ We handle all processes in-house, including cutting, drilling for galvanizing, and galvanizing treatment *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials, thanks to our wide range of products and abundant inventory. We can handle quantities starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Example of Processing】 Material: SS material Size: t6×150×150 Processing Method: Band saw cutting + hot-dip galvanizing (suspension holes required) Application: Components for electrical equipment used outdoors 【Benefits of Processing at Our Company】 ▼ Since we can consistently handle cutting, hole drilling for galvanizing, and galvanizing treatment all in one place, we can reduce the hassle and costs of procurement. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide variety of products we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: LEX-SF1 (low thermal expansion alloy) Size: t12 (6+6) × 150 × 268 Processing Method: Cut out using a band saw Application: For parts that require precision. For areas that should not be affected by heat. 【Benefits of Processing at Our Company】 ▼ Normally, manufacturers take about a month for made-to-order production, but since we maintain inventory of blocks of a certain size, we can respond with immediate delivery within the applicable size range! *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for a wide variety of small lots due to the large selection of steel materials we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: TOP PLATE Gr.A Size: t12 (6+6) × 150 × 268 Processing Method: Special hardfacing on SS material Application: Used in areas with severe wear (hardened layer) ⇒ One side has low wear resistance due to being SS, while the opposite side has a strength of approximately HRC60-80. 【Benefits of Processing at Our Company】 ▼ Generally, hardfacing on thin plates is difficult... ▼ The amount of hardfacing can be changed to 3mm or 6mm, etc. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We can handle quantities starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SM400A (Welded structural rolled steel) Size: Build H H8/12×200×200×4000 (with some hole processing) Processing Method: Laser cutting of steel plates + welding into H-shaped steel Application: Used as structural columns, beams, foundation piles, and machinery products for civil engineering and construction. 【Benefits of Processing at Our Company】 ▼ Due to the special materials, ready-made H steel is usually manufactured by the manufacturer in units of 4 tons, 10 tons, etc. Delivery times also take 3 to 4 months or more. ⇒ Because we are a steel supplier, we can cut out only the necessary amount from steel plates and weld them. This significantly reduces total costs and shortens delivery times to about one month. ▼ The processing size this time is small within the Build H category, so there are few contractors that can handle this processing. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others
• Bridge Materials
• Secondary steel products

Our company achieves short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SS400 Size: t9×25×80 Processing Method: Milling 6F + Drilling + Chamfering Application: Fasteners 【Benefits of Processing at Our Company】 ▼ With our inventory and machining capabilities, we can carry out consistent production in-house. This enables significant reductions in delivery times. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SS Material Channel Steel Size: t5×50×100 Processing Method: Roll Bending Application: Large structures and construction materials 【Benefits of Processing at Our Company】 ▼ As a steel supplier with inventory, we can achieve short delivery times even for special materials. ▼ Since material procurement and processing can be done consistently, there are significant cost advantages. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others
• Other earthworks, foundation works, and exterior floors
• Secondary steel products

Our company achieves short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: FCD600 (ductile cast iron, spheroidal graphite cast iron) Size: φ500×228 Processing Method: Band saw cutting Application: For sliding surfaces and wheels, etc. 【Benefits of Processing at Our Company】 ▼ As a steel supplier with inventory, we can achieve short delivery times even for special materials. ▼ Since material procurement and processing can be done consistently, there are significant cost advantages. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company achieves short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Examples】 Material: HARDOX400 Application: Used in areas with severe wear Size: t10×(Bottom φ780)×(Top 720×580)×670 Processing Method: Laser cutting, press bending (rounded corner bending) 【Benefits of Processing at Our Company】 ▼ We have a constant inventory of wear-resistant steel due to our steel sales, enabling immediate processing. ▼ We can handle laser and bending processing consistently, achieving short delivery times. ▼ We are capable of handling high-difficulty rounded corner bending. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company achieves short delivery times for a wide variety of small lots due to the extensive range of steel materials we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: High manganese steel Application: Machine parts used in areas where magnetic influence is undesirable Size: t16×270×2100 Processing Method: Water jet 【Benefits of Processing at Our Company】 ▼ We can cut and deliver only the necessary amount ▼ A consistent response from material procurement to processing, reducing the hassle of sourcing arrangements *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SKD11 (alloy tool steel, die steel) Application: As a cutting tool for the tip of machinery Size: t9×30×35 Processing Method: Wire cutting 【Benefits of Processing at Our Company】 ▼ We can accommodate orders starting from one piece, allowing for small orders of only what is needed. ▼ There is no need to collect leftover materials, eliminating unnecessary inventory. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company achieves short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We can handle quantities starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SNCM439 (Nickel Chromium Molybdenum Steel) Size: t80×320×400 Processing Method: In-house equipment 【Benefits of Processing at Our Company】 ▼ As a forged product of nickel alloy (SNCM439), it has high hardness and is difficult to cut. ▼ The cutting angle is acute, requiring significant skill for processing. ⇒ Our company utilized years of expertise to provide a quick response. ▼ Processing is cheaper and faster than wire cutting. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide range of products we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Examples】 Material: HARDOX500 Application: Used in areas with severe wear Size: t30×540×2000 Processing Method: Cutting, bending, drilling Φ25 holes (approximately 500 pieces) 【Benefits of Processing at Our Company】 ▼ Since we also sell steel materials, we always have wear-resistant steel in stock and can process it immediately. ▼ We can handle laser and bending processing consistently, enabling short delivery times. ▼ HARDOX500 has a very high hardness, making bending difficult, but we can accommodate it if the radius is gentle. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SS400 (General structural rolled steel) Application: Processed sample product Size: 30×30×50 Processing Method: MC processing (Machining Center) 【Benefits of Processing at Our Company】 ▼ By adding an extra step to the material before delivery, we can reduce the number of setup changes for our customers and minimize their workload. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company achieves short delivery times even for a wide variety of small lot orders due to the extensive range of steel materials we handle and our abundant inventory. We accept orders starting from just one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: HARDOX600/Pre-hardened Steel (HRC57) Size: t20×150 Processing Method: 6-sided milling (6F) 【Benefits of This Processing at Our Company】 ▼ Capable of handling ultra-high hardness HARDOX600 with our unique MC processing machine specialized for high rigidity. ▼ By using pre-hardened steel, we achieve ultra-short delivery times without the need for heat treatment. ▼ The material has an HRC of around 57, allowing for processing. *For procurement of metal processed products, contact "Ito Akihiro Sangyo"!

• others

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide variety of products we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SM490A (Welded structural rolled steel) Application: Buildings, structures Size: t25×468×620 Processing Method: Beveling 【Benefits of Processing at Our Company】 ▼ By using specialized machines instead of grinders for beveling, we reduce delivery times and lessen the burden on workers. ▼ Welding can be done immediately, eliminating extra steps on-site and improving work efficiency. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others
• Steel construction
• Exterior and paving materials <General>

Our company achieves short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We can handle quantities starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: DOCOL450 (wear-resistant steel material, Hardox thin plate) Application: As cushioning material or protective cover in areas with severe wear Size: t1×500×800 Processing Method: Laser processing 【Benefits of Processing at Our Company】 ▼ We have the rare material itself in stock and can also process it, enabling short delivery times. ▼ By incorporating it as a protective cover or cushioning material rather than as part of the main machine, we can extend product life at a lower cost. ▼ The material has a hardness of approximately HRC43-47 without heat treatment, making it difficult to process. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• others

Our company realizes short delivery times even for a wide variety of small lots due to the extensive range of steel materials we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: STRENX700 Application: For parts requiring higher strength than general structural steel (H-beams, L-beams) Size: t9×60×60×5000 Processing Method: Laser cutting, bending 【Benefits of Processing at Our Company】 ▼ Since we can manage everything from material procurement to processing in-house, arranging and tracking progress is very easy. *There are not many places that can provide a consistent response from material supply to processing, as Strenx is only distributed as raw material. *For procurement of metal processed products, contact "Ito Akihiro Sangyo"!

• others

Excellent wear resistance extends the lifespan of machinery, reduces weight, and lowers maintenance costs. It is hard yet resilient, and can be welded using standard methods, making it widely used in various fields.

• Steel
• Bulldozers and scrapers
• Rock drills, demolition machines, and excavators

We handle various steel grades such as S10C, S55C, SNC, SCR, SCM, SK, SKS, SKD, and more. We also have Swedish steel, bainitic steel, and gauge steel plates available. If you're looking for a specific type of steel, please feel free to contact us. We also offer services such as cutting, bending, and BTA processing.

• Steel
• Drilling Machine
• Rock drills, demolition machines, and excavators

This is a bent product made of wear-resistant steel plate called Hardox. We can also perform drilling. Please send us the drawings. We will provide a quote.

• Drilling Machine

Bending processed product of stainless steel (SUS304) square bar.

• Metalwork
• Fittings and fittings work

This is a STRENX 700E high-strength 80 kg steel plate. It is a bent product measuring 9x60x90x4000 (mm). The bent part has an R shape.

• Steel
• Secondary steel products
• Transport machinery

This is a wire-cut product made from HSS (SKH), designed for cutting pipes. The customer brought a handwritten drawing requesting us to make it because the ready-made products were too expensive. We processed it at our company.

• Rock drills, demolition machines, and excavators
• Steel
• Transport machinery

SS round bar bending and threaded machining products

• Steel

We can accommodate diagonal cuts at various angles. The cutting will be done with a band saw. Please consult us regarding square bars, round rods, general steel materials, square pipes, and more.

• Steel

S45C pipe diagonal cutting products We accommodate various diagonal cuts. The cutting is done with a band saw. It is faster than wire cutting and reduces costs.

• Steel
• Secondary steel products

S50C is a special cutting product. It allows for cost reduction and effective use of materials by shortening processing time and delivery time, as well as reusing leftover materials. Since it is cut with a band saw, it is cheaper and has a faster delivery time compared to wire cutting.

• Steel
• Secondary steel products

Copper pipe, diagonal cut product All diagonal cuts are made with a band saw. Shortened delivery time and cost reduction compared to wire cutting.

• Steel
• Secondary steel products

We can handle cutting products such as round bars of special steel, plate materials, angles, channels, H-beams, and square pipes, from single pieces to mass production of thousands. We also have circular saws, ensuring clean cutting surfaces and quick delivery! Our detailed responsiveness is our strength. Of course, please feel free to consult us for processing starting from one piece.

• Steel

NM13Mn is a high manganese steel that becomes stronger and harder when subjected to impact. It can also be welded. In that case, it is recommended to use a dedicated welding rod to ensure that the welded areas are of equivalent quality.

• Steel
• Steel Structure System
• Secondary steel products

HARDOX 600 is a wear-resistant steel plate. It has a hardness of around HRC 58, but it can be welded normally. It can be used as is without heat treatment. Until now, it has been used for construction equipment attachments and mixer blades, but recently it has also been increasingly used for machine parts. Just the other day, a mold maker mentioned that they are currently using SK and SKD with jigs between the mold and their own machines, but the heat treatment costs for SK and SKD are high, and there are issues with warping. I suggested they try HARDOX 600, and they expressed interest in using it. HARDOX 600 excels in wear resistance, and there are four types: HARDOX 500, 450, 400, and a thin version starting from 3.2 mm. It can be processed in various ways, including bending, tapping, drilling, countersinking, and milling, so why not give it a try?

• Steel