廣杉計器 List of Products and Services

■Features - This is a flat washer made of stainless steel (SUS303). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By inserting a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the part. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, or plain washers (sometimes abbreviated as "W").

• others

■Features - It is a flat washer made of baked material. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, which helps maintain a certain fastening force, prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features ・This is a low creep flat washer. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of polyvinyl chloride. ・Washers are generally used by placing them between a screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features - This is a flat washer made of polyvinyl chloride (PVC). - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS (6 substances).

• others

■Features ・This is a flat washer made of PTFE. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・The washer is a thin, disc-shaped component with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a consistent fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features - This is a flat washer made by RENY. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - A washer is a thin, disc-shaped component with a hole in the center for the screw to pass through. - By inserting a flat washer between the screw and the workpiece, the seating area is expanded, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - It refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made by RENY. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, thus maintaining a certain fastening force, preventing screw loosening, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of silicone. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is increased, which reduces the surface pressure on the target material, maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features - This is a flat washer made of PVDF. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of PPS. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of PPS. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws to prevent loosening, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, maintaining a certain fastening force, and preventing loosening of the screw, damage to the fastening surface, and stabilizing the seating surface. ・It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of polypropylene. ・Washers are generally used by placing them between a screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, which helps maintain a certain fastening force, prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. ・It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features - This is a flat washer made by Peak. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, which helps maintain a certain level of fastening force, prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features - It is a flat washer made of Duracon. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features - It is a flat washer made of shock-absorbing nylon. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the seating area is expanded, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of nylon. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, maintaining a certain fastening force, and preventing loosening of the screw, damage to the fastening surface, and stabilizing the seating surface. ・It refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features - It is a flat washer made of nylon. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, which maintains a certain fastening force and prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features - This is a flat washer made of MC nylon. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - The washer is a thin disc with a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the seating area is expanded, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features - This is a flat washer made by Lumira. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features - This is a flat washer made by Lumira. - Washers are generally used by placing them between a screw and the material being fastened to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the material being fastened, the seating area is enlarged, reducing the surface pressure on the target material, maintaining a certain fastening force, and preventing loosening of the screw, damage to the fastening surface, and stabilizing the seating surface. - It refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made by Lumira. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・The washer is a thin, disc-shaped component with a hole in the center for the screw to pass through. ・By inserting a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of poly slider material. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thus maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・This refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2 standards.

• others

■Features ・This is a flat washer made of Kapton. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for passing the screw through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of Galapoe material. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features ・It is a flat washer made of fiber. ・Washers are generally used by placing them between a screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・The washer is a thin disc with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is expanded, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features - It is a flat washer made of fiber. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - The washer is a thin disc with a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features - It is a flat washer made of Duracon. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - The washer is a thin disc with a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

• others

■Features ・This is a flat washer made of Duracon. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

• others

■Features ・This is a set washer made by Peak. ・The set washer functions similarly to a flat washer, but by forming protrusions or tabs in the inner diameter, it engages with the screw to prevent the washer from falling off. ・It facilitates tightening work and is particularly effective in tasks that use small screws. ・The washer is a thin disc with a hole in the center for passing a screw through. ・Compliant with EU-RoHS2.

• others

■Features ・This is a set washer made of PPS. ・The set washer functions similarly to a flat washer, but by forming protrusions or tabs in the inner diameter, it engages with the screw to prevent the washer from falling off. ・It facilitates tightening operations and is particularly effective in tasks that use small screws. ・The washer is a thin disc with a hole in the center for passing a screw through. ・Compliant with EU-RoHS2.

• others

■Features ・This is a shock-absorbing nylon set washer. ・The set washer functions similarly to a flat washer, but by forming protrusions or tabs in the inner diameter, it engages with the screw to prevent the washer from falling off. ・It facilitates tightening work and is particularly effective in tasks that use small screws. ・The washer is a thin disc with a hole in the center for passing a screw through. ・Compliant with EU-RoHS2 standards.

• others

■Features ・This is a set washer made of polycarbonate. ・The set washer functions similarly to a flat washer, but by forming protrusions or tabs in the inner diameter, it engages with the screw to prevent the washer from falling off. ・It facilitates tightening work and is particularly effective in tasks that use small screws. ・The washer is a thin disc with a hole in the center for passing a screw through. ・Compliant with EU-RoHS2 standards.

• others

■Features ・This is a set washer made of PTFE. ・The set washer functions similarly to a flat washer, but by forming protrusions or tabs in the inner diameter, it engages with the screw to prevent the washer from falling off. ・It facilitates tightening operations and is particularly effective in tasks that use small screws. ・The washer is a thin disc with a hole in the center for passing a screw through. ・Compliant with EU-RoHS2.

• others

■Features - This is a nylon set washer. - The set washer functions similarly to a flat washer, but by forming protrusions or tabs on the inner diameter, it engages with the screw to prevent the washer from falling off. - It facilitates tightening work and is particularly effective in tasks that use small screws. - The washer is a thin disc with a hole in the center for passing a screw through. - Compliant with EU-RoHS2 standards.

• others

■Features ・This is a nylon set washer. ・The set washer functions similarly to a flat washer, but by forming protrusions or tabs in the inner diameter, it engages with the screw to prevent the washer from falling off. ・It makes tightening work easier and is particularly effective in tasks that use small screws. ・The washer is a thin disc with a hole in the center for passing a screw through. ・Compliant with EU-RoHS2.

• others

■Features - This is a set washer made of black Duracon. - The set washer functions similarly to a flat washer, but by forming protrusions or tabs in the inner diameter, it engages with the screw to prevent the washer from falling off. - It facilitates tightening operations and is particularly effective in tasks that use small screws. - The washer is a thin disc with a hole in the center for passing a screw through. - Compliant with EU-RoHS2 standards.

• others

■Features - This is a set washer made of Duracon. - The set washer functions similarly to a flat washer, but by forming protrusions or tabs on the inner diameter, it engages with the screw to prevent the washer from falling off. - It facilitates tightening operations and is particularly effective in tasks that use small screws. - The washer is a thin disc with a hole in the center for passing a screw through. - Compliant with EU-RoHS2 standards.

• others

■Features ・This is a nylon rosette washer. ・The rosette washer, also known as a serrated washer, has a conical hole in the center and appears mountain-shaped when viewed from the side. ・Its main role is to prevent the sinking of the seating surface, similar to a flat washer, but it is specifically designed for use with countersunk screws. ・When using countersunk screws, a tapered recess is required on the receiving side, but by using this rosette washer, countersunk screws can be used on flat surfaces as well. ・Compliant with EU-RoHS2.

• others

■Features ・This is a rosette washer made of black Duracon. ・The rosette washer, also known as a serrated washer, has a conical hole in the center and resembles a mountain shape when viewed from the side. ・Its main role is the same as that of a flat washer, which is to prevent surface indentation, but it is specifically designed for use with countersunk screws. ・When using countersunk screws, a tapered recess is required on the receiving side, but by using this rosette washer, countersunk screws can be used on flat surfaces as well. ・Compliant with EU-RoHS2.

• others

■Features ・This is a rosette washer made of Duracon. ・The rosette washer, also known as a serrated washer, has a conical hole in the center and resembles a mountain shape when viewed from the side. ・Its main role is the same as that of a flat washer, which is to prevent sinking of the seating surface, but it is specifically designed for use with countersunk screws. ・When using countersunk screws, a tapered recess is required on the receiving side, but by using this rosette washer, it is possible to use countersunk screws on flat surfaces as well. ・Compliant with EU-RoHS2.

• others

■Features - It is a brass shaft protection spacer (with standard thread). - It is a brass spacer without surface treatment. - It can also be used as a support for components around the shaft of rotating machinery. - It is a product with excellent corrosion resistance, fluidity, and cost balance. - Compliant with EU-RoHS2.

• others

■Features - It is a brass shaft protection spacer (fine thread). - It is a brass spacer without surface treatment. - It can also be used as a support for components around the shaft of rotating machinery. - It is a product with excellent corrosion resistance, flowability, and cost balance. - Compliant with EU-RoHS2.

• others

■Features - This is a spacer for stacking two brass sub-boards. - It is a brass spacer treated with "gold flash and silver plating" on the surface. - It is used by soldering it between printed circuit boards. - The spacer is equipped with fluororesin to prevent noise and touch-up during board checks. - Compliant with EU-RoHS2 standards.

• others

■Features - It is a brass power solder spacer. - The brass spacer has undergone "gold flash treatment" for surface processing. - It is used for installation by soldering between printed circuit boards. - It can be used not only for spacing between circuit boards but also as a power supply terminal. - It is a product with excellent corrosion resistance, fluidity, and cost balance. - Compliant with EU-RoHS2.

• others