スペクトル List of Products and Services

● Extend HDMI monitor up to 150m without compression ● Uses Cat-5e/6/6e ● Supported resolution is up to Full HD ● No time lag since it is uncompressed * Audio is extended simultaneously over the HDMI signal

• Information display device
• Facility Management System
• others

● Switch operation for 8 PCs with a single monitor/mouse/keyboard Includes wired remote switch and infrared remote control ● Supports a maximum resolution of 4K 60Hz. ● Compatible with USB 2.0, allowing connection of other USB devices in addition to mouse/keyboard. * Includes 8 HDMI/USB combination cables for PC connection.

• Other PCs and OA equipment
• Office supplies

● Switch between dual displays with HDMI/DisplayPort at once Comes with a wired remote switch ● Supports a maximum resolution of 4K 60Hz. ● Compatible with USB 2.0, allowing connection of a mouse/keyboard and other USB devices. * Includes 2 USB cables for PC connection.

• Other PCs and OA equipment
• Office supplies

● Switch between two PCs with HDMI output for a dual display at once Comes with a wired remote control switch ● Supports a maximum resolution of 4K 60Hz ● Compatible with USB 2.0, allowing connection of a mouse/keyboard and other USB devices. * Includes two USB cables for PC connection.

• Other PCs and OA equipment
• Information and communication equipment and infrastructure

The CAS-403 is an HDMI monitor extender that extends the signal using commercially available LAN cables. It can extend up to 100m with a direct CAT-5e connection and up to 120m with a direct CAT-6 connection. There are no restrictions on extension via a HUB as long as it is within the specifications of the network. It supports not only 1:1 connections but also 1:multiple distribution extensions, allowing the video from a single PC to be displayed simultaneously at multiple remote locations. The resolution supports up to 4K at 60Hz regardless of the extension distance. No adjustment of the image quality on the extended monitor is required with IP connection. It is an ultra-compact and lightweight extender weighing approximately 167g.

• Facility Management System
• others

● Simultaneously display one input video on four monitors like a monitor splitter ● Switch and display input video randomly for each output port ● Supported resolution up to 4K 60Hz ● External audio output available ● Input video selection can be done via the front buttons or remote control

• Other PCs and OA equipment
• others
• Information display device

● Converts HDMI video output to VGA (analog) signal for display. Full HD compatible ● Lightweight at 35g, compact size ● Extends up to 100m using HDMI optical hybrid cable

• IoT
• Audio and video equipment

● Switch and display 4 PCs with HDMI output on one monitor. With remote control switch ● Maximum supported resolution is 8K 60Hz. ● Equipped with auto-jump function for automatic switching to the port with a new input signal. ● EDID automatic acquisition.

• IoT
• Audio and video equipment

●Composed of a Host (TX) and a Device (RX), it can extend between units using a single optical cable. ●It allows for an extension of up to 1000m in single mode. ●The extended RX can connect up to 4 USB devices via a 4-port HUB. ●The transfer speed is 5Gbps. It is exclusively for USB3.x devices. USB2.0/1.1 will not operate.

• IoT
• Audio and video equipment

The PVD-1300 is an extender that extends a DVI monitor up to 1 km using an optical cable. It can extend up to 1 km in single mode and up to 300 m in multi-mode. The resolution supports up to MAX 1920×1200 WUXGA. No adjustment of the picture quality is needed for the extended monitor. It is designed with heat dissipation measures, so it does not get hot even during prolonged use. The power jack is lockable to prevent it from coming loose.

• IoT
• Information display device

●SOP-2000 is a KVM extender that extends HDMI monitors and mouse/keyboard over long distances using optical cables. ●It uses a single-core LC, single-mode fiber to extend up to 20km. ●The resolution at the extended end supports 4K (3840×2160) at 60Hz. ●No adjustment of the picture quality on the extended monitor is necessary. ●Equipped with local monitor output and IR. ●SFP module is replaceable. ●EDID is automatically acquired. ●Can be mounted on walls or racks with rack mounting.

• IoT

The PVD-1310 is an extender that extends a DVI monitor up to 1 km using an optical cable. It can extend up to 1 km in single mode and up to 500 m in multi-mode. The resolution supports up to MAX 1920×1200 WUXGA. No adjustment of the image quality on the extended monitor is necessary. The connector type does not take up much space and it uses USB power.

• IoT

●Composed of a Host (TX) and a Device (RX), it can be extended between units using a single LAN cable. ●Extension of up to 100m is possible with Cat-6a or higher cables. ●The extended RX can connect up to 4 USB devices via a 4-port HUB. ●Transfer speed is 5Gbps. USB 2.0/1.1 devices can also be connected. ●Large volume data can be extended without delay using isochronous transfer.

• IoT
• Audio and video equipment

●Composed of a Host (TX) and a Device (RX), it can extend between units using a single optical cable. ●It allows for a maximum extension of 20 km in single mode. ●The extended RX can connect up to 4 USB devices via a 4-port HUB. ●The transfer speed is 480 Mbps. USB 3.x devices can also be connected, but the transfer will be at 480 Mbps.

• IoT
• Audio and video equipment

● SOD-505 is an extender that extends a monitor, mouse, and keyboard up to 20 km using optical cables. ● Simultaneous audio extension is also possible. ● It supports a maximum resolution of 1920×1080 Full HD. ● No adjustment of the picture quality on the extended monitor is necessary. ● It uses FC optical connectors, securely fixing the main unit and the optical cable.

• IoT

The SOV-505 is an extender that extends a monitor, mouse, and keyboard up to 20 km using optical cables. Simultaneous audio extension is also possible. It supports a maximum resolution of 1920×1080 Full HD. No adjustment of the picture quality on the extended monitor is necessary. It uses FC optical connectors, ensuring a secure connection between the main unit and the optical cable.

• IoT

The SKL208-DE is an extender that allows you to extend a monitor, mouse, and keyboard up to 400 meters using commercially available LAN cables. It supports 150 meters with CAT-5e and 200 meters with CAT-6. It can be extended up to 400 meters via a HUB. It supports not only 1:1 but also 1:multiple distribution extension, allowing one PC to be operated simultaneously from multiple remote locations. The resolution supports up to MAX 1920×1080 Full HD. With IP connection, no adjustment of the image quality on the extended monitor is necessary. There is a VGA type available, and they can be mixed.

• IoT

The SKL208-VE is an extender that allows you to extend a monitor, mouse, and keyboard up to 400 meters using commercially available LAN cables. It supports 150 meters with CAT-5e and 200 meters with CAT-6. It can be extended up to 400 meters via a HUB. It supports not only 1:1 but also 1:multiple distribution extension, allowing one PC to be operated simultaneously from multiple remote locations. The resolution supports up to MAX 1920×1080 full HD. With IP connection, no adjustment of the image quality on the extended monitor is necessary. There is a DVI type available, and they can be mixed.

• IoT

The PKM1080-TR is a KVM extender that extends an HDMI monitor and mouse/keyboard up to 60 meters using a LAN cable. It supports PoC, operating with power supplied from either the transmitter or receiver side. The resolution at the extended end supports Full HD (1920×1080). No adjustment of the picture quality on the extended monitor is necessary. It features a local monitor and a 3.5mm stereo port.

• IoT
• Audio and video equipment

The CAS-102V4 is an extender that extends HDMI monitors using commercially available LAN cables. It can extend up to 100m with a direct CAT-5e connection and up to 120m with a direct CAT-6 connection. There are no restrictions on extension via a HUB as long as it is within the specifications of the network. It supports not only 1:1 connections but also 1:multiple distribution extensions, allowing the video from a single PC to be displayed simultaneously at multiple remote locations. It supports a maximum resolution of 1920×1080 Full HD. No adjustment of the image quality on the extended monitor is required with IP connection. It is an ultra-compact and lightweight extender weighing approximately 113g.

• VR/AR

The LK3080 is an extender that extends HDMI monitors and KB/mouse up to 400m via LAN cable. It can connect directly with CAT-6 for a maximum of 300m, and up to 400m via a HUB. It supports not only 1:1 connections but also distribution extension up to 1:8 and multi-to-multi connections of 8:8. The resolution supports up to MAX1920×1080 full HD. With IP connection, no image quality adjustment is needed for the extended monitor. It can be mounted on the wall.

• IoT
• Audio and video equipment

The LP3080 is an extender that allows HDMI monitors to be extended up to 400 meters using commercially available LAN cables. It can be directly connected with CAT-6 for a maximum of 300 meters, and up to 400 meters via a HUB. It supports not only 1:1 connections but also distribution extensions of up to 1:8, as well as 8:8 multi-to-multi connections. The resolution supports up to MAX 1920×1080 Full HD. No image quality adjustment is needed for the extended monitor with IP connection. It can be mounted on a wall.

• IoT
• Audio and video equipment

The LP2010V2 is an extender that allows you to extend an HDMI monitor up to 300 meters using commercially available LAN cables. It can connect directly with CAT-5e/-6 for a maximum distance of 150 meters, and up to 300 meters via a HUB. It supports not only 1:1 connections but also the distribution and extension of up to 20 devices, enabling the simultaneous display of a single PC's video on multiple remote locations. The resolution supports up to MAX 1920×1080 full HD. With IP connection, no image quality adjustment is needed for the extended monitor. It is an ultra-compact and lightweight extender weighing approximately 113 grams.

• IoT
• Audio and video equipment

● A total of 10 patterns of video wall display are possible. 4 inputs and 4 outputs. ● A total of 5 patterns of multi-viewer display are possible. ● Display switching can be done with a remote control and can be detailed set through the OSD (on-screen display) shown on the monitor. ● Zoom and crop display switching is possible.

• IoT
• Audio and video equipment

● A total of 15 patterns of video wall displays are possible. 1 input, 9 outputs. ● High-definition images can be displayed on large screens with 2×2=4 screens or 3×3=9 screens. ● Display switching can be done with one touch using the remote control or the buttons on the unit. ● Bezel adjustment allows for fine-tuning of slight screen misalignments.

• IoT
• Audio and video equipment

● It is possible to display 8 patterns of video walls: 1×1/2×2, 1×2/2×1, 1×3/3×1, and 1×4/4×1. ● 4K or Full HD display options are selectable and changeable. Input can be selected as HDMI or DVI. ● Display switching can be done with one touch using the remote control or the buttons on the unit. ● The top two panels can be rotated 180 degrees.

• IoT
• Audio and video equipment

●Composed of a Host (TX) and a Device (RX), it can be extended using a multimode optical cable. ●The maximum extension distance is 300m. ●The transfer speed is 5Gbps. It is backward compatible with USB 2.0/1.1, but the transfer speed depends on each USB specification. ●The power jack can be secured with a locking mechanism to prevent disconnection.

• IoT
• Audio and video equipment

●Composed of a Host (TX) and a Device (RX), it can be extended with a multimode optical cable. ●The maximum extension distance is 350m. ●The transfer speed is 5Gbps. It is exclusively for USB3.x devices. There is no backward compatibility with USB2.0/1.1. ●The power jack can be secured with a locking mechanism to prevent disconnection.

• IoT
• Audio and video equipment

●Composed of a Host (TX) and a Device (RX), it can extend between units using a single optical cable. ●Extension is possible up to 2Km in multimode and 20Km in single mode. ●The RX at the extension end can connect up to 4 USB devices via a 4-port HUB. ●The transfer speed is 480Mbps. USB3.x devices can also be connected, but the transfer will occur at 480Mbps.

• IoT
• Audio and video equipment

●It consists of a Host (TX) and a Device (RX), allowing extension between units with a single LAN cable. It can be directly connected up to 150m, and up to 300m via a HUB. ●The extended RX can connect up to 4 USB devices using a 4-port HUB. ●The transfer speed is 480Mbps. USB 3.x devices can also be connected, but the transfer will occur at 480Mbps.

• IoT
• Audio and video equipment

●Composed of a Host (TX) and a Device (RX), it can be extended between units using a single LAN cable. Up to 40m with CAT-5e and a maximum of 50m with CAT-6. ●The extended RX can connect up to 4 USB devices via a 4-port HUB. ●Transfer speed is 480Mbps. USB 3.x devices can also be connected, but the transfer will be at 480Mbps. ●It has mounting holes for securing to walls or other surfaces.

• IoT
• Audio and video equipment

●Composed of a Host (TX) and a Device (RX), it can be extended between units using a single LAN cable. Up to 40m with CAT-5e and a maximum of 50m with CAT-6. ●The extended RX can connect up to 4 USB devices via a 4-port HUB. ●The transfer speed is 480Mbps. USB 3.x devices can also be connected, but the transfer will occur at 480Mbps.

• IoT
• Audio and video equipment

The HMI01-04 is a monitor splitter that distributes HDMI input to four monitors (and display devices). It supports resolutions from Full HD to 4K at 30Hz. The transfer speed is 10.2Gbps and is compatible with HDMI version 1.4b. It retrieves the EDID of the monitor with the lowest resolution and communicates it to the PC.

• IoT
• Audio and video equipment

●HMI02-04A is a monitor splitter that distributes HDMI input to four monitors (and display devices). ●It supports resolutions from Full HD to 4K at 60Hz. ●The transfer speed is 18Gbps and is compatible with HDMI version 2.0. ●It features three EDID acquisition modes.

• IoT
• Audio and video equipment

● IRA02-04 is a monitor splitter that distributes a VGA input port to 4 monitors (and display devices). 2 inputs and 4 outputs. ● It supports a wide range of resolutions from 800×600 to 1920×1080. ● The frequency bandwidth supports up to 500MHz. ● With our extension cable, a maximum extension of 60m is possible.

• IoT
• Audio and video equipment

● IRA01-04 is a monitor splitter that distributes a VGA input port to four monitors (and display devices). ● It supports a wide range of resolutions from 800×600 to 2048×1152. ● The frequency bandwidth supports up to 200MHz. ● With our extension cable, a maximum extension of 30m is possible.

• IoT
• Audio and video equipment

●DVA01-04 is a monitor splitter that distributes a monitor (and display devices) with a DVI input port to four outputs. ●It supports a wide range of resolutions from 1280×768 to 1980×1440. ●The frequency bandwidth supports up to 350MHz. ●Equipped with three EDID acquisition modes.

• IoT
• Audio and video equipment

The SOD-501 is an extender that uses optical cables to extend DVI monitors and audio. It can extend up to 500m with multimode fiber and 20km with single-mode fiber. The supported resolution allows for full HD (1920×1080) display even at maximum extension. It features a 3.5mm audio port.

• IoT
• Audio and video equipment

●SOD-502 is an extender that uses optical cables to extend DVI monitors and mouse/keyboard. It has a local monitor port. It can extend up to 500m with multimode fiber and 20km with single-mode fiber. ● The supported resolution can display full HD (1920×1080) even at maximum extension. ● Equipped with a 3.5mm audio port.

• IoT
• Audio and video equipment

The LC2000 is an extender that uses LAN cables to extend HDMI monitors. It can extend up to 140m with a direct connection, and up to 2.5Km by cascading through a repeater. The maximum number of monitors that can be connected is 250, allowing the same image to be displayed simultaneously. It supports a maximum resolution of 4K (3840×2160) at 30Hz. It can also distribute using a HUB (gigabit switch). It is equipped with an EDID storage function.

• IoT
• Audio and video equipment

The AV-2000 is an extender that uses optical cables to extend VGA monitors over long distances. It can extend up to 500m with multimode fiber and 20km with single-mode fiber. The supported resolution allows for full HD (1920×1080) display even at maximum extension. It is equipped with a 3.5mm audio port.

• IoT
• Audio and video equipment

The MS-201OP is a monitor extender that extends HDMI monitors over long distances using optical cables. It can extend up to 20 km using a single-core SC, single-mode fiber. The resolution at the extended location supports Full HD (1920×1080). No adjustment of the picture quality is required for the extended monitor. It features a local port and a 3.5mm stereo jack.

• IoT
• Audio and video equipment

The MS-103OP is a monitor extender that extends HDMI monitors over long distances using optical cables. It can extend up to 3 km using a single-core SC, single-mode fiber. The resolution at the extended monitor supports Full HD (1920×1080). No adjustment of the picture quality on the extended monitor is necessary.

• IoT
• Audio and video equipment

The FND-300 is a compact monitor extender that extends HDMI signals using optical cables. It extends up to 300 meters using a single-core LC, multi-mode. The resolution of the monitor at the extended end supports up to 4K at 30Hz.

• IoT
• Audio and video equipment

● Switch operation for 4 PCs with HDMI output using a single monitor/mouse/keyboard. Comes with a remote control switch. ● Supports a maximum resolution of 4K 60Hz. ● Compatible with USB 2.0, allowing connection of other USB devices in addition to mouse/keyboard. * Includes 4 USB cables for PC connection.

• IoT
• Audio and video equipment