駿河精機 List of Products and Services

The Smart LAC H410 series is controller-controlled, while the Smart LAC H420 series is used by connecting to a PC via USB. We have prepared wavelengths of 405nm, which are not available in the Smart LAC H410 series, with beam diameters of 0.5mm and 3mm. ■ Rich variations (wavelengths and beam diameters) ■ PC control (connected with a sensor head and USB cable) ■ Divergence measurement You can choose the optimal wavelength and beam diameter according to the target object.

• Other measuring instruments

■Reduction of Adjustment Time - Measurements necessary for beam adjustment can be performed with a single measuring device, eliminating the need for attaching and detaching the device. - Measurement of beam divergence angles is possible, allowing for ideal collimation adjustments. ■Space-saving Adjustment - Compact and high-precision measurements are possible.

• Other measuring instruments

The "Smart LAC Series" is an angle measuring device that measures the tilt of a surface without contact. Conventional displacement sensor methods calculate the height difference between two points, making them less effective for measuring small workpieces. However, this product adopts a laser autocollimator method, allowing measurement at a single point, which enables the measurement of small workpieces. Additionally, it supports single spot measurement and multi-spot measurement. 【Features】 ■ Non-contact instant angle adjustment ■ Long working distance (Measurement range ±0.5 degrees at W.D. 300mm) ■ High precision and high resolution ■ Wavelength selection from red, green, blue, and infrared ■ Capable of measuring the angle of external incident light *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The Smart LAC H410 series has added a green 520nm beam diameter Φ3mm type to its lineup. The output beam's light intensity has improved to more than twice that of previous models, making it an effective item for measuring low-reflective materials. Compared to the red 655nm, the visual sensitivity is approximately 8 times better, making it easier to adjust with the target object.

• Other measuring instruments

We have newly added the opposing beam branching adapter HT-20T to the lineup of Smart LAC H410/H420 series accessories. This is a special item that allows for high-precision simultaneous measurement of the parallelism of two opposing surfaces. Conventional issues: - Measuring one surface at a time does not achieve the desired accuracy. - The cost and adjustment labor for two measuring devices is burdensome. - The installation space required for two measuring devices becomes large. These issues can be resolved. It can be mounted on either the Smart LAC H410 or H420 series, allowing for simultaneous measurement of the parallelism of two surfaces with just this one device.

• Other measuring instruments

The "Smart LAC Series" is a non-contact angle measuring device that can determine the tilt of a surface in real-time. It employs the "laser autocollimator method," which projects a laser beam onto the target object and calculates the tilt of the surface from the angle of the reflected light. With a single sensor, it can measure minute angles and the angular relationships between multiple workpieces, achieving low cost and space-saving design. Depending on the application, you can choose between "single spot measurement," which allows you to select any one point from multiple light spots, and "multi-spot measurement," which enables simultaneous measurement of up to five light spots and measurement of the angular differences between them. ★ We are currently offering a basic knowledge document that explains the fundamental principles and features of laser autocollimators. You can view it immediately via PDF download. 【Features】 ■ Long working distance (measurement range ±0.5 degrees at W.D. 300mm) ■ High precision and high resolution ■ Wavelength selection available from red, green, blue, and infrared ■ Capable of measuring the angle of external incident light ■ No need to prepare multiple sensors, saving space and cost *Demo units are available for loan. If you are interested, please feel free to contact us.

• Other measuring instruments

High load capacity "aluminum cross roller stage 2 to 4 times", slim "aluminum cross roller stage 30% DOWN", low price "aluminum cross roller stage 50% DOWN" X-axis linear ball guide: KXT series. We offer "KXT04015" with a stage surface size of 40×40mm and "KXT06015" with a stage surface size of 60×60mm. For more details, please contact us or refer to the catalog.

• others

The X-axis linear ball guide (SS) stage features a thin structure where the guide and the main body are integrated. The main body is made of stainless steel, and the guide section employs a Gothic arch groove, achieving high strength and high precision. For more details, please contact us or refer to the catalog.

• others

Rotary stage using ball screws Ideal for applications requiring repeated small-angle drives! 【Features】 ○ High durability specifications When continuing repeated drives at small angles, there were concerns about backlash due to wear in worm gear types. By changing the movement mechanism from worm gear (sliding) to ball screw (rolling), "high durability" is achieved. ○ Improved acceleration and deceleration performance Compared to worm gears, the friction (sliding resistance) is smaller, allowing for smooth startup and acceleration. ○ Backlash reduction By using preloaded components in the mechanism, "almost zero backlash" is achieved. ● For more details, please request materials or download the catalog.

• others

Linear ball guide for horizontal plane Z-axis: The KHE series is a space-saving automatic stage with a belt loop system, offering a low-cost solution with a 47% reduction in the wedge-type Z-axis stage. We offer "KHE04006" with a stage surface size of 40×40mm and "KHE06008" with a stage surface size of 60×60mm. For more details, please contact us or refer to the catalog.

• others

The XYZ axis linear ball guide (SS) stage features a thin structure where the guide and body are integrated. The body is made of stainless steel, and the guide section employs a Gothic arc groove, achieving high strength and high precision. For more details, please contact us or refer to the catalog.

• others

The automatic rotating stage of the KRE series features a slim design that is 20% thinner than existing rotating stages, a lightweight design that is 10% lighter, and a low price that is 24% lower than existing rotating stages. We offer the stage surface sizes: φ39 for the "KRE04360" and φ60 for the "KRE06360." For more details, please contact us or refer to the catalog.

• others

The Z-axis linear ball guide (SS) stage features a thin structure where the guide and body are integrated. The body material is stainless steel, and the guide section employs a Gothic arch groove, achieving high strength and high precision. For more details, please contact us or refer to the catalog.

• others

The XY-axis linear ball guide (SS) stage features a thin structure where the guide and the main body are integrated. The main body is made of stainless steel, and the guide section employs a gothic arc groove, achieving high strength and high precision. For more details, please contact us or refer to the catalog.

• others

The XZ axis linear ball guide (SS) stage features a thin structure where the guide and body are integrated. The body is made of stainless steel, and the guide section employs a gothic arch groove, achieving high strength and high precision. For more details, please contact us or refer to the catalog.

• others

Our conventional model, the "Laser Autocollimator," detects the reflection of parallel light projected from a semiconductor laser and measures the tilt of an object non-contactly, but it was limited to stationary objects. The "High-Speed Angle Displacement Meter HRAID" can measure the angle of a moving object "dynamically." World's fastest sampling Over 16,000 times faster than conventional methods, with 500 kHz (2 μs) sampling. For a rotating body at 10,000 rpm, it achieves measurement of 3,000 points per revolution. Long measurable distance By maintaining a distance from the object, the workability of measurement is improved. Equipped with analog voltage output Can be connected to oscilloscopes and FFT analyzers. (It is possible to build a correlation environment with conventional analysis methods.)

• Measurement and Inspection

1. Industry No.1 measurement resolution of 1/1000λrms @ 3σ. Reliable and stable measurement results can be obtained. Improved measurement quality leads to enhanced product quality and yield for our customers. 2. Excellent cost performance. We offer high-precision wavefront sensors at an affordable price. Measurements can be taken without being affected by air turbulence or vibrations (no need for equipment such as vibration isolation tables or temperature-controlled rooms).

• Measurement and Inspection

The "KXT Series" is an automatic stage that moves in the X-axis direction, achieving excellent functionality at a low price. We offer two models: the "KXT04015" with a stage surface size of 40mm and the "KXT06015" with a size of 60mm. We will guide you to the optimal product and usage methods based on your usage conditions, so please feel free to consult us. [Features] ■ Specialized for necessary functions ■ Achieves low price *For more details, please refer to the catalog or feel free to contact us.

• others

The "PG Series" is an automatic stage that achieves a slim design with a guide integrated structure using X-axis linear ball guides such as "PG413" and "PG513." We offer a wide variety of options, including table sizes and sensor options. We will guide you to the optimal product and usage method based on your usage conditions, so please feel free to consult us. 【Motor Options】 ■ Standard Motor ■ High Torque ■ High Resolution ■ With Electromagnetic Brake ■ α Step ■ AC Servo Motor *For more details, please refer to the catalog or feel free to contact us.

• others

The "KXG/KXL series" is an automatic stage handled by Suruga Seiki. The "KXG series" has a more compact design compared to conventional linear ball guide and cross roller guide stages. The "KXL series" offers a wide range of options from 30mm to 300mm, allowing you to choose according to your application. 【Motor Options】 - Standard Motor - High Torque - High Resolution - With Electromagnetic Brake - α Step - AC Servo Motor *For more details, please refer to the catalog or feel free to contact us.

• others

The "Cross Roller Guide" is an automatic stage made of aluminum, featuring a lightweight, compact, and high-precision design. Due to the linear contact provided by the V-groove rail and cross rollers, it achieves high rigidity. There is almost no operational sliding, and it is suitable for low-friction micro-feeding. The "KXC series" has sensors embedded in the stage body, resulting in minimal protrusion from the table surface, allowing for use without concern for left or right orientation. The "KX series" has a slim body while maintaining high rigidity. It can support a maximum load of up to 25 kg. 【Features】 ■ Lightweight ■ Compact ■ High precision ■ Horizontal Z-wedge mechanism *For more details, please refer to the catalog or feel free to contact us.

• others

The "KXS Series" is an automatic stage that achieves low cost by adopting slide guides. By using slide guides, it realizes a long stroke. It features in-house manufactured ball screws and slide guides that leverage precision machining technology. The in-house production of mechanical components ensures high quality, and by placing the sensors inside the main body, it has a compact structure without protrusions on the stage sides. 【Features】 ■ Long stroke ■ Low cost ■ High quality ■ Compact ■ Cover type - Prevents foreign object drop - Prevents grease scattering *For more details, please refer to the catalog or feel free to contact us.

• others

The "Automatic Goniostage" is available in two types: a ball screw type suitable for repeatedly driving small angles, and a worm type that employs cross rollers for the moving guide and a worm gear mechanism. It allows for repeated micro-angle positioning in optical pickup adjustment and inspection devices. It enables posture correction of components during assembly and mounting processes. It can be widely used in production and inspection lines for applications such as laminating camera lenses and LCD panels for mobile phones. 【Features (Ball Screw Type)】 ■ High durability specifications ■ Improved acceleration and deceleration performance ■ Reduced backlash *For more details, please refer to the catalog or feel free to contact us.

• others

At Suruga Seiki, we offer a variety of "automatic rotating stages" tailored to different scenes. You can choose the optimal stage from our "sign motion rotating stage," which uses ball screws for the moving structure, achieving high durability and high-speed drive with low wear; the "worm gear rotating stage," which allows for precise positioning over a wide angle; and the "direct drive type," which supports 360° high-speed rotation. 【Features (Sign Motion Rotating Stage)】 ■ High durability specifications ■ Improved acceleration and deceleration performance ■ Reduced backlash *For more details, please refer to the catalog or feel free to contact us.

• others

The "Stage Unit Examples" feature unit cases tailored to specific scenes based on achievements. By combining the approximately 2,000 types of stages listed in the catalog, the variations for positioning expand. It is possible to create original units for customers by combining stages. 【Case Studies】 ■ Semi-Automatic Units ・5-Axis Unit (for camera adjustments, etc.) ・6-Axis Unit (for lens and image sensor alignment, etc.) ■ Fully Automatic Units ・3-Axis Unit (for chip mounting, etc.) ・5-Axis Unit (for lens and measurement evaluation, etc.) ■ Custom Cases ・6-Axis Unit with high durability, compact size, and high rigidity (for image sensor alignment, camera module assembly, etc.) *For more details, please refer to the catalog or feel free to contact us.

• others

At Suruga Seiki, we offer a wide range of control devices for automatic stages, including "stepping motor controllers," "cables," and "motors." Our lineup includes the compact and low-cost stepping motor controller "DS102/112 series," which features a driver for 5-phase stepping motor drive with dual-axis capability, as well as the case-type driver "KR series," which allows for easy connections. *For more details, please refer to our catalog or feel free to contact us.

• Automatic Control Equipment

The "BXT Series" is a manual stage with a thin structure where the guide and the main body are integrated. The main body is made of steel, and the guide section features a gothic arc groove, achieving high rigidity and high precision. We offer a comprehensive lineup with various sizes, surface treatments, and optional specifications. 【Features】 ■ Thin structure with integrated guide and main body ■ Made of steel ■ Features gothic arc grooves ■ Achieves high rigidity and high precision *For more details, please refer to the catalog or feel free to contact us.

• others

This catalog introduces the manual stage "Linear Ball Guide BSS/BSB Series." The main body material is stainless steel, and it features a gothic arc groove in the guide section, achieving high rigidity and high precision. It is available in a wide range of sizes, surface treatments, and optional specifications. [Featured Products] ■ X-axis Linear Ball Guide (SS) Stage □25 ■ X-axis SS Stage Operation Side Clamp Type □40/□50/□60/□70 ■ XY-axis SS Stage Operation Side Clamp Type □40/□50/□60/□70 ■ X and XY-axis SS Stage Mounting Posture Multi-Type □40/□60 ■ Thin XY-axis Linear Ball Guide (SS) Stage □40 to □70 ■ XY-axis Linear Ball Guide BYT Series □40/□60, and more *For more details, please refer to the catalog or feel free to contact us.

• others

This catalog introduces the manual stage "Cross Roller Guide Stage." We offer a range of products including the lightweight and high-precision "B11 series," the long-stroke "B12 series," and the high-resolution "B10 series." 【Featured Products】 ■ X-axis Cross Roller Guide Stage □25/□40/□60 ■ X-axis Cross Roller Guide Stage □80/□100/□120 ■ X-axis Long Stroke Cross Roller Guide Stage ■ XY-axis Cross Roller Guide Stage □25/□40/□60 ■ XY-axis Cross Roller Guide Stage □80/□100/□120 *For more details, please refer to the catalog or feel free to contact us.

• others

This catalog introduces the manual stage "Ant Stage." We offer two types of feeding mechanisms: "Rack & Pinion" and "Lead Screw." There is a wide variety of sizes, strokes, and feed pitches available. 【Contents】 <Rack & Pinion Method> ■ Rack Rail Series - Size: □40 - Main Material: Aluminum ■ Rack & Pinion Series - Size: □25/□40/□60/40×80/60×120 - Main Material: Brass/Aluminum <Lead Screw Method> ■ Long Lead Screw Series - Size: □40/40×80 - Main Material: Aluminum ■ Short Lead Screw Series - Size: □25/□40/□60/18×60 - Main Material: Brass/Aluminum *For more details, please refer to the catalog or feel free to contact us.

• others

This catalog introduces a "Manual Goniostage" with a circular arc drive that has its rotation center on the central vertical line of the table surface. It features the "Ant-type Goniostage," which employs an ant-style moving guide and a worm gear feeding mechanism, as well as the "Cross Roller Goniostage Worm Type," which uses a cross roller moving guide and a worm gear feeding mechanism, and the "Cross Roller Goniostage Micrometer," which incorporates a cross roller moving guide and a micrometer feeding mechanism. These stages are ideal for angle adjustments and alignment. They are widely used in jigs, production equipment, and device integration. [Contents (partial)] ■ Manual Goniostage Guidance ■ Ant-type Goniostage □25: B54/B55-25 Series ■ Ant-type Goniostage □30: B54/B55-30 Series ■ Ant-type Goniostage □40: B54/B55-40 Series ■ Ant-type Goniostage □50: B54/B55-50 Series *For more details, please refer to the catalog or feel free to contact us.

• others

This catalog introduces the "Manual Rotation Stage." It features the "Fitting Type," which allows for coarse 360° rotation and fine adjustments (micrometer head), as well as the "Cross Roller Bearing Type," which offers improved rigidity compared to the fitting type, and the "Through Hole Type," which has a hole in the center of the stage to facilitate laser transmission and wiring management. The stage allows for positioning of the workpiece's rotation from coarse to fine adjustments, and the side of the main body is equipped with angle scales for convenient position reproduction (excluding the square type). [Contents] ■ Manual Rotation Stage Guidance ■ Rotation Stage BRE Series □40/□60: BRE04020/BRE06020 ■ Rotation Stage (Fitting Type) φ24–110: B43 Series ■ Rotation Stage (Cross Roller Bearing Type) φ85・100: B44/B47 Series ■ Rotation Stage (Cross Roller Bearing Type Stainless Steel Specification) φ60: BS43 Series *For more details, please refer to the catalog or feel free to contact us.

• others

This catalog introduces manual stage units and accessories. Starting with the "multi-axis stage unit," which eliminates the hassle of selecting combinations of manual stages, we also feature accessories for manual stages such as the "micrometer head (maintenance part)" and "lead screw." 【Contents】 ■ Multi-axis stage unit ■ Micrometer head (maintenance part) ■ Lead screw ■ Z-axis bracket ■ Adapter plate *For more details, please refer to the catalog or feel free to contact us.

• others

This catalog introduces the standard/cover type single-axis actuators handled by Suruga Seiki. It includes specifications and accuracy standards for each series, as well as attachment mounting jigs and convenient sensor set products (optional). [Featured Products] ■SX15 Series ■SX20 Series ■SX26 Series ■SX30 Series ■SX45 Series *For more details, please refer to the catalog or feel free to contact us.

• others

This catalog introduces the optoelectronics handled by Suruga Seiki. It features the "High-Performance Mirror Holder FM531," which is optimal for places requiring high-precision alignment and where stability and operability are important, as well as the "High-Rigidity Cross Movement Holder F504," "Lens Adapters," and more. [Contents (partial)] ■ Mirror Holders ■ Cross Movement Holders ■ Cross Movement Adapters ■ Polarizer Holders ■ Prism Holders *For more details, please refer to the catalog or feel free to contact us.

• Measurement and Inspection

This catalog introduces core components necessary for alignment, such as stage units and holders used for WG alignment and LD/PD alignment. We offer a wide range of products, including the manual stage alignment unit (3-axis) "E2000S series," the "device holder" designed for precise alignment, and the "FC connector holder" for securing optical fibers with FC connectors. [Contents] ■ Manual alignment units ■ Automatic alignment units ■ Device units ■ Fiber holders ■ Device holders ■ Adapters ■ Connector sensing meters *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices