ウェーブフロント List of Products and Services

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It excels in plasma simulations of low-pressure gases, where calculations using fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis even for complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need to simulate the entire device. - It excels in plasma simulations for low-pressure gases, where calculations using fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis even for complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It specializes in plasma simulations in low-pressure gases, where calculations with fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, efficiently handling complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for a full simulation of the entire device. - It specializes in plasma simulations in low-pressure gases, where calculations with fluid models are challenging. - It supports both 2D and 3D, allowing for efficient analysis even with complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

By utilizing tools and collaborating, we can contribute to new material development more efficiently and easily. ■ Ideal for "Materials Informatics" This is a group of molecular modeling/simulation tools for next-generation material development equipped with quantum mechanics, classical mechanics, mesoscale, statistics, and analysis/crystallization tools. 【Features】 ■ Simulation software that streamlines material development It can be used by those engaged in research, development, design, and manufacturing across various industries. ■ Supports various types of materials ■ All tasks such as creating crystal structures, setting calculation conditions, and displaying calculation results can be performed on a single GUI screen. 【Examples】 Tribochemical (lubrication) reactions Analysis of CFRP (carbon-based materials) Crystal growth, thin film formation, fuel cells, lubricants Catalysts, polymers, mixtures, metals and alloys, batteries, and fuel cells, etc. *For more details, please feel free to contact us. Wavefront Co., Ltd. Sales Department MAIL: sales@wavefront.co.jp URL: http://www.wavefront.co.jp/

• Other Software
• others
• Scientific Calculation and Simulation Software

"Materials Studio," a simulation software useful for new material development. By utilizing and collaborating with this tool, it contributes to more efficient and easier new material development. A next-generation molecular modeling/simulation toolset equipped with quantum mechanics, classical mechanics, mesoscale, statistics, and analysis/crystallization tools. 【Features】 ■ Simulation software that streamlines material development Available for use by those engaged in research, development, design, and manufacturing across various industries. ■ Supports various types of materials. ■ Allows for the creation of crystal structures, setting of calculation conditions, and display of calculation results all on a single GUI screen. 【Examples】 Tribochemical (lubrication) reactions Analysis of CFRP (carbon-based materials) Crystal growth, thin film formation, fuel cells, lubricants Catalysts, polymers, mixtures, metals and alloys, batteries, and fuel cells. "Materials Informatics" "An initiative to explore new materials through information science." In simple terms, "I want to create amazing materials easily!!" has become a realistic endeavor. *For more details, please feel free to contact us.

• Other Software
• others

In this video, we will introduce the features of "Pipeline Pilot" and provide analysis examples. Pipeline Pilot is a tool that enables large-scale data processing and analysis, automation of tasks, and visualization of workflows. [Contents] - Why Pipeline Pilot is necessary - Features and characteristics of Pipeline Pilot - Analysis examples using machine learning with Pipeline Pilot If you have any questions or uncertainties, please feel free to contact us.

• Other Software

Have you ever felt challenges such as, 'I want to grasp the current status of the team in a timely manner and implement measures to improve sales,' or 'Since we manage everything on paper, I can only understand the operational status through daily reports'? These issues can be resolved with the BI dashboard 'MotionBoard,' which enhances corporate performance through data visualization and data-driven insights. This document provides a detailed introduction to MotionBoard. [Contents (excerpt)] ■ Have you ever felt such challenges? ■ How MotionBoard can be utilized in sales, production, and planning departments ■ What is MotionBoard? ■ Benefits of MotionBoard ■ Steps for data utilization ■ Six key features *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

This document introduces "leaflet-like materials" and "screen screenshot materials" for "MotionBoard." MotionBoard is a BI dashboard that enhances corporate performance through "data visualization" and "data-driven decision-making." It features diverse expressive capabilities and advanced mapping functions. We also provide templates packed with know-how. [Contents] ■ Leaflet-like materials ■ Screen screenshot materials - Market potential analysis, targeting area selection, product ABC analysis - Visitor analysis, Quick Win Template *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

The document provides a detailed explanation of "Optimization of Streamer Discharge Calculations." It includes topics such as "Streamer Discharge Calculations," "Explanatory Variables and Objective Variables," and "How Optimization Progresses." As an example of combining optimization and simulation, we use our software "VizGlow" for the simulation of plasma devices to explore operating conditions. [Contents (Excerpt)] ■ Streamer Discharge Calculations ■ Explanatory Variables and Objective Variables ■ How Optimization Progresses ■ The Optimization Process (Video) ■ At what point should the values be used as the objective function? *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

This document reports on the prediction of the cycle life of Li-ion batteries using machine learning with Pipeline Pilot. We will introduce the sections: "Background," "Flow," "Results," and "Discussion." Pipeline Pilot is a tool that enables large-scale data processing and analysis, automation of tasks, and visualization of workflows. 【Contents】 ■ Background: (1) Li-ion batteries and their cycle life prediction, (2) What is machine learning ■ Flow: (1) Machine learning in Pipeline Pilot ■ Results: (1) A part of the Pipeline Pilot operation screen, (2) Output screen (3) Comparison of output screens ■ Discussion *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

This document presents a case study on multi-objective variable problems using Pipeline Pilot. It includes topics such as "Clustering based on molecular structure," "Overview of approaches to multi-objective variables," and "Data used in examples of multi-objective optimization." Pipeline Pilot is a tool that enables various processes using a wide range of functions, achieving simplification and efficiency in data processing through a concise GUI. [Contents (excerpt)] ■ Pipeline Pilot workflow ■ Clustering based on molecular structure ■ Overview of approaches to multi-objective variables ■ Data used in examples of multi-objective optimization ■ Finding Pareto optimal solutions for multi-objective variables *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

Bayesian optimization is a method for exploratory search to find the maximum or minimum of a function whose overall shape is unknown or cannot be differentiated, while estimating the shape of the function. The key point is how to find an optimal value with as few evaluations as possible in situations where unknown evaluations are very time-consuming and costly. This document also includes "use cases in the field of FA," "system integration and a wide range of proposals," and "an overview of the Pipeline Pilot product." [Examples of Bayesian Optimization Applications] - Optimization of operating conditions for various devices - Exploration of optimal compositions for various materials - Utilization in hyperparameter search for machine learning - Efficient discovery of accurate learning models *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

In this document, we introduce case studies of "Pipeline Pilot." We include topics such as "calculation of metal transport properties," "simulation to determine glass transition temperature," and "organization and clustering of analytical data." Pipeline Pilot is a tool that enables large-scale data processing and analysis, automation of tasks, and visualization of workflows. [Contents (excerpt)] ■ Calculation of metal transport properties ■ Simulation to determine glass transition temperature ■ Simulation to determine mechanical properties ■ Organization and clustering of analytical data ■ Display and organization of a large number of plate images *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement in a demonstration!

• Other Software

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and motion!

• Other Software

FLiPS is a facility maintenance management system developed with the aim of providing a user experience similar to Excel, and it is particularly recommended for customers facing the following challenges: - A user-friendly interface that is easily accepted on-site and the desire to integrate with ERP systems - The need to link product quality with facility maintenance for centralized management - The desire to visualize costs, schedules, and actual performance related to facility maintenance in a calendar format - The need to understand the frequency and number of unexpected failures to establish a maintenance plan that aligns with actual conditions - The desire to know the optimal cycle for regular inspections and replacements - The need to streamline budget formulation for equipment purchases and maintenance management Additionally, it is now integrated with various IoT-related products, enabling the following capabilities: 1. Automatically creating and notifying maintenance and inspection plans when sensor data indicates thresholds are likely to be exceeded, notifying both managers and workers. 2. Integrating with tablet-compatible systems (such as i-Reporter) to aggregate and visualize information from the field.

• others

Motion Board meets various data utilization needs in manufacturing sites. By centralizing data that was previously managed by each system and analyzing it from multiple perspectives, you can gain new insights that you may not have noticed before. ◆ Are you facing these challenges? ◆ ◇ Delayed understanding of the site situation, making it difficult to quickly notice problems ◇ Time-consuming process of entering handwritten daily reports into Excel for primary and secondary processing ◇ Occurrence of defective products and yield issues in the production site ◇ Difficulty in quickly detecting equipment anomalies ◇ Data management is fragmented across systems, making it hard to access necessary information promptly We solve these kinds of issues in production, inspection, and reporting operations on-site. ◆ Free trial available now ◆

• Sales promotion and sales support software
• Other Software

We will visualize the personalized maintenance operations! 【Main Reasons for Selection & Implementation Effects】 ■ Real-time visualization of production sites, improving operational efficiency ■ Reduction of defective products by one-fifth (By detecting and preventing signs of defects in advance, we can reduce defective products) ■ Visualization of "bottlenecks" in the production line, leading to reduced overtime ■ Reduction in report creation costs ■ Acceleration of the PDCA cycle ■ Immediate access to desired information for analysis ■ Reduction in time and costs for report creation (You can directly export graph data on the screen to Excel, PowerPoint, or PDF)

• BI Tools
• IoT
• Big Data

"Particle-PLUS" is a simulation software suitable for the research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It excels in plasma simulations for low-pressure gases, where calculations using fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing for efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It excels in plasma analysis within vacuum chambers, enabling high-speed simulations of film deposition rates and more. - It is proficient in plasma simulations in low-pressure gases, where calculations using fluid models are challenging. - It supports 2D and 3D, allowing for efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit the customer's equipment is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Neutral gas density distribution/temperature distribution/velocity distribution, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in plasma analysis within vacuum chambers and can perform simulations of film deposition rates at high speed. - It excels in low-pressure plasma analysis. - It is proficient in plasma simulations in low-pressure gases, where calculations using fluid models are challenging. - It supports 2D and 3D, allowing for efficient analysis even with complex models. - As a strength of our in-house developed software, customization to fit the customer's equipment is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

PipelinePilot is software that allows you to perform all tasks related to data analysis, including data preprocessing, analysis, and visualization such as graph creation, all within a single product. It can be used for narrowing down candidates during new material development and for discovering correlations in complex data where relationships are not immediately apparent. 【Features】 ◆ Easily create data processing flows without programming knowledge ◆ Simplifies data preprocessing, which can be a bottleneck when handling large-scale data ◆ Many successful implementations in chemical and drug discovery companies *For more details, please contact us.

• Other Software

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations using fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analysis, allowing for efficient analysis of complex models. - As a strength of our in-house developed software, it can perform standard functions for CCP and magnetron sputtering calculations, as well as customization to fit the customer's equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

CFD provides a means to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw compressor has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricating oil is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw compressor has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, significant costs and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricant is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw pump has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, significant costs and time must be spent on prototyping and experimentation. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw pumps have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

CFD provides a means to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can assist in product development using Simerics' CAE/CFD software. The two-axis screw pump has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, significant costs and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

CFD provides a means to shorten product development periods, reduce prototype costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

CFD allows for the reduction of product development time and prototyping costs, as well as obtaining detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, providing results easily and rapidly. Additionally, the cooling lubricants are analyzed using the VOF method, reproducing conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples using Simerics' CAE/CFD software that can be beneficial for product development. Two-axis screw compressors have applications in refrigeration and air conditioning-related fields, such as air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricant is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experimentation. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• others

PipelinePilot is a powerful data science platform that can process data at high speed. It can handle complex data formats, including text and numerical data, as well as images, chemical structures, and genetic sequences. It meets the diverse needs of various industries such as automotive, aerospace, energy, oil, pharmaceuticals, and biotechnology. 【Features】 ◆ Easily create data processing flows without programming knowledge ◆ Build high-quality models using built-in validation techniques ◆ Rich integration features with Python, R, and web services *For more details, please contact us.

• Other Software

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement in a demo presentation!

• Other Software

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a live demo!!

• Other Software

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a demo presentation!!

• Other Software

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP, utilizing all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for the actual mesh creation and movement!

• Other Software

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP, utilizing all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for the actual mesh creation and movement!

• Other Software

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Other Software

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a live demo!!

• Other Software

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a live demo!!

• Other Software

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a live demo!!

• Other Software

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement in a demo presentation!

• Other Software

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement in a demonstration!

• Other Software