Toyo Seiki Seisaku-sho, LTD. List of Products and Services

The viscosity is determined from the descent speed of the rod when a sample is filled between a ring and a rod with a certain gap, and the rod is pressed with a constant force.

• Other measuring instruments

-

• others

Since it can be applied at a constant speed, it can create a coating film with a uniform thickness without causing uneven application.

• others

-

• Other measuring instruments

-

• Other measuring instruments

-

• Other measuring instruments

Type NP is also compatible with the Clemens scratch hardness test for decorative boards.

• Other measuring instruments

●By attaching additional weights to the balanced arm, the test load can be up to a maximum of 2000g. ●The number of reciprocations of the sample stage can be set to your desired count using the preset counter.

• Other measuring instruments

●Up to 300 test specimens can be tested continuously. It contributes to labor-saving, efficiency, and improved reproducibility of the Charpy impact test. ●Test specimen transport ⇒ Measurement of specimen thickness and notch depth ⇒ Setting on the sample stage ⇒ Automatic processing of measurement data.

• Other measuring instruments

● Automatically measures the "thickness" and "remaining width" of Charpy Izod impact test specimens. ● The "thickness" and "remaining width" measured with this device are automatically transferred and input into the impact testing machine and data processing software* (optional). ● By eliminating the dimensional measurement and data entry tasks for test specimens, it contributes to the efficiency of the measurement process.

• Other measuring instruments

This is a gripping tool suitable for tensile testing of materials such as plastic. ■ Capacity: 1kN to 20kN ■ Applicable: Plastics, etc.

• Other measuring instruments

This is a gripping tool suitable for tensile tests of materials such as paper and plastic film. ■ Capacity: 100N to 5kN ■ Applicable: Paper, film, etc.

• Other measuring instruments

This is a gripping tool suitable for tensile tests of dumbbell-shaped rubber specimens. ■ Capacity: 1kN to 3kN ■ Applicable: Dumbbell-shaped rubber specimens, etc.

• Other measuring instruments

This is a gripping device suitable for tensile tests of dumbbell-shaped rubber specimens. ■ Capacity: 500N to 3kN ■ Application: Dumbbell-shaped rubber specimens

• Other measuring instruments

This is an air-operated gripping device suitable for tensile tests of rubber specimens and the like. ■ Maximum capacity: B-11: 5kN B-12: 1kN B-13: 500N ■ Applicable: Rubber, etc.

• Other measuring instruments

● Complete automation from sample input to cleaning. Contributes to labor-saving, efficiency, and improved reproducibility of measurement tasks. ● Continuous testing of 10 sample cups (optional 40 cups) is possible. ● Compact and space-saving desktop model (height 1060mm). ● A wide range of options is available (automatic measurement by method A, dry air drying unit, load change mechanism, etc.).

• Other measuring instruments

- Automatic measurement of up to 50 temperature levels is possible by setting the sample. - The heat capacity of the probe is minimized to improve measurement accuracy. - Continuous operation is possible by following the thermal contraction of the sample with a piston heater. - By creating a vacuum inside the cylinder before sample insertion, concerns about bubble contamination in the sample are alleviated. - The piston pressurization cylinder can be used as a cleaning cylinder, making cleaning easy. - Over-temperature prevention features for the piston heater and cylinder heater. - Compact and lightweight.

• Other measuring instruments

When converting pigments into paints or inks, a vehicle (dispersing agent) is added and ground in, but there are various methods for this process. This machine is specifically designed for testing based on JIS K 5101, and it incorporates a small amount of pigment and vehicle between two glass plates, which are rotated while applying a load with weights to facilitate the mixing process. Therefore, the setting of test conditions such as load and rotation speed can be easily adjusted depending on the type of sample.

• Other measuring instruments

Since it is electric, the reproducibility of measurements is improved.

• Other measuring instruments

The behavior of the ink film separating between rolls on a printing machine is significantly influenced by the characteristics of the ink, making it one of the important factors in evaluating printability. The inkometer is a device that models the functions of each roll on the printing machine and measures the tack of the ink that appears here. Tack is a property related to the viscosity of the ink and represents its adhesiveness, which is deeply related to the surface strength of the paper and trapping, among other factors. ● Operator name (up to 20 characters), sample name (up to 80 characters), and test conditions (up to 50 characters) can be registered. ● The removal of the top roll and vibration roll has become easier.

• Other measuring instruments

■It is possible to conduct physical property evaluation tests such as tensile strength, compressive strength, and bending strength of a wide range of materials including plastics and rubber. ■You can choose from a rich lineup of chucks (gripping tools) and jigs. ■It is compact and can be installed in a space-saving manner.

• Other measuring instruments

When filling the sample into the melt indexer, depending on the shape and properties of the sample, it may not be possible to fill it within one minute (JIS K 7210). This device heats and compresses the sample at a temperature lower than its melting point inside the furnace body, molding it into a stick shape. By molding it into a stick shape, filling the sample into the melt indexer becomes easier. Since filling can be performed under constant conditions, the test conditions are standardized, allowing for the acquisition of accurate data. Additionally, it is possible to reduce the effects of hydrolysis.

• Other measuring instruments

● The workability has been improved by the front door that opens and closes up and down. ● The position of the smoke exhaust section and the control panel can be selected depending on the installation location.

• Other measuring instruments

-

• others

-

• others

Measure the rebound angle of the sample and calculate the rebound elasticity. The maximum, minimum, central, and average values will be processed.

• Other measuring instruments

Compliant with JIS K6255 (2013)! There is a correlation with the Lyupke method and the data. Fully automatic measurement of the rebound elasticity of rubber for up to 20 samples. ○ Hammer: Diameter Φ12.5±0.05mm ○ Impact speed: 1.88±0.02m/s ○ Release method: Opening by cutting off the current of the electromagnet ○ Supply device: Revolver type with 20 units ○ Test specimen: Φ29.0±0.5mm, thickness 12.5±0.5mm ○ Holding force: 200±20N ○ Air pressure: 0.4MPa or more ○ Operating environment: 5~35℃, 35~85% RH, no condensation ○ Body dimensions: Approximately W550×D700×H880mm ○ Weight: Approximately 100kg ○ Power supply: AC100V, single-phase, 50/60Hz, 2A *Optional Origin block, model SBA-GB (used when setting the origin of the hammer) ○ Reference standards: JIS K6255 (2013), ISO 4662:2017 *For more details, please contact us or refer to the catalog.

• Other measuring instruments

●Specifications based on JIS Z 1702 (film), P 8118 (paper), JIS K 6250* (rubber), L 1096 (textiles and knits), etc. can be produced (indentation diameter and applied pressure). (*Hardness IRHD or higher) ●Measurement results can be output to a compact printer. ●Data can be transferred to a PC*. (*PC and software are optional)

• Other measuring instruments

It is used to measure the thickness of films, rubber, woven fabrics, and other sheet-like materials, with the measurement pressure and indenter matched to their respective JIS standards according to the material.

• Other measuring instruments

A roller with a mass of 2 kg is moved back and forth at a speed of 10 ± 0.5 mm/sec to press the sample onto the test plate. ● Compact tabletop design that does not take up much space. ● A sample mounting fixture that makes it difficult for air to enter between the sample and the test plate is included as standard. ● Comes with a roller storage fixture for when not in use.

• Other measuring instruments

-

• Other measuring instruments

○Capacity: 0.5ml ○Plate weight: 115g (acrylic plate) ○Reference standards: JIS K 5101, K 5701 *Option: Load plate (glass plate)

• Other measuring instruments

●It can be used as a simple manual injection molding machine to shape dumbbell-shaped or strip-shaped test specimens. ●By replacing the inner cylinder, it can also be used as a pelletizer to directly feed amorphous samples obtained by mixing (cylinder diameter ∅20mm) and pelletize them.

• others

-

• Other measuring instruments

The air flow rate is determined when a certain suction pressure (differential pressure) is applied to the test specimen, and the air permeability is calculated per unit time and per unit area to evaluate the air permeability characteristics of the material.

• Other measuring instruments

To eliminate the effects of additive migration, aging tests will be conducted by heating within a glass tube.

• Other measuring instruments

-

• Other measuring instruments

It incorporates sample insertion and removal devices into the conventional standard type, enabling fully automated operation. The load lifting device adopts a two-step separation load method. Three-point and six-point suspensions are selectable.

• Other measuring instruments

The evaluation of rigidity and flexibility is conducted by swinging relatively weak materials such as woven fabrics, paper, and films horizontally in a vertical position. 【Product Features】 ○ Measurement Range: 0.01 to 5000mN ○ Specimen Width: 12.7, 25.4, 50.8mm (J TAPPI No.40) ○ Specimen Length: 25.4, 38.1, 63.5, 88.9, 114.3mm (same standard) ○ Rotation Speed: 2rpm (6°/second) ○ Reference Standards: JIS L1085, L1096, J TAPPI NO.40, TAPPI T543om-11 * Options: Common data acquisition software Model EX-2, Compact printer Model PS-B1 * For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

This evaluates the fatigue level of plastic materials by applying repeated stress, using a constant load provided by an unbalanced mass rotation.

• Other measuring instruments

○Reference Standards: JIS B 7726, B7730, K 7202-2, Z2245, ASTM E18, D 785, ISO 6508-1, -2, -3, ISO 2039-2 ○Power Supply: AC100V, single phase, 2A (domestic), AC200-240V, single phase (overseas), 50/60Hz (selectable) ○Dimensions and Weight: W196×D487×H820mm, approximately 82kg ●For other functions and features, please refer to the catalog or contact us.

• Other measuring instruments

It reproduces the condition during cleaning with a brush and evaluates the extent of damage to surfaces such as coatings.

• Other measuring instruments

-

• Other measuring instruments

-

• Other measuring instruments

■140 test specimens can be tested continuously. (*In the case of a thickness of 4mm) ■Contributes to labor-saving, efficiency improvement, and enhanced reproducibility in measurement tasks. ■A direct deflection measurement system (optional) is available. ■Compact space-saving design.

• Other measuring instruments