サンコー List of Products and Services

This is a VESA-compatible mobile large TV stand that can accommodate televisions and monitors with a maximum size of 800×600mm. Even if set horizontally, the part where the TV is mounted can rotate 90 degrees, allowing for easy and quick adjustment to a vertical position. It offers a wide height adjustment range, from approximately 180cm at maximum to about 110cm at minimum. A table for placing devices like DVD players is included with the stand, and the stand's legs are equipped with four casters, making it easy to move around. This mobile large TV stand is sure to be highly effective in various situations, such as meetings, presentations, demonstrations at exhibitions, and as digital signage at receptions or storefronts.

• Other fixtures and fittings

This is a medical PC cart that is easy to move with four casters. It has a weight capacity of 4 kg and is compatible with 24 to 27-inch monitors. It comes with a keyboard tray and mouse table that can be slid in and out. The most notable feature is the height adjustment, which can be done effortlessly by simply stepping on a pedal. The four large casters provide stability and smooth movement. Additionally, the top of the desk slides, allowing you to store documents or a laptop while only exposing the monitor section.

• Other PCs and OA equipment

The monitor angle adjustment and orientation are possible. It is made entirely of metal and can support up to 10kg, providing peace of mind. The desk rack is very useful for placing a keyboard underneath and small items on top. It can also be used on desks where clamps cannot be used. You will be able to secure more desk space than ever before.

• Other fixtures and fittings

The LCD monitor stand can be attached to VESA-compatible LCD monitors. By installing it, you can easily adjust the height and angle. Additionally, the stand weighs approximately 2.5 kg and features anti-slip material on the entire back side, which helps prevent large monitors from tipping over.

• Other fixtures and fittings

You can install three monitors vertically in the space of one monitor, allowing for a space-saving triple monitor setup and a spacious desk. Not only can you install three monitors vertically, but you can also use only two of the three short arms to set up two monitors in a vertical position. Additionally, by combining two or three of these arms and installing them on the left and right, you can create layouts for larger monitors with four, six, or nine screens. Of course, it can accommodate various situations such as adjusting the height and tilt angle (upward/downward) of each monitor, as well as panning (side-to-side movement) and rotation. Monitors can be rotated 360 degrees (pivot rotation), and the LCD can be used in either portrait or landscape orientation. This product is compatible with VESA standard monitors and can be mounted to VESA standards of 75mm x 75mm or 100mm x 100mm.

• Other fixtures and fittings

This is a monitor arm that allows for spacious use even on a desk without depth by moving in four axes.

• Other fixtures and fittings

The joint part of the arm can overlap and fold, making it possible to install two monitors side by side, which was difficult with conventional products. Since the joint can bend over 180 degrees, it allows for the desired monitor arrangement. This is an 8-axis monitor arm for two dual screens with four axes. It extends forward about 400mm from the pole, and when the monitor is lowered to the back while facing forward, the multi-segment arm folds while overlapping, lowering to 105mm from the pole. (This may vary depending on the monitor size and angle.)

• Other fixtures and fittings

This is a gas shock swivel monitor arm compatible with 27-inch wide monitors. Thanks to the gas shock mechanism, the height can be easily adjusted to suit the user. By moving the arm, you can make efficient use of space even on desks with limited depth. The joint can bend over 180 degrees, allowing for a variety of arrangements.

• Other fixtures and fittings

Many customers are likely using pole racks as desks for their computers, but standard monitor arms cannot be used because they are designed to be clamped onto the surface of the desk. The "4-axis monitor arm pole mount" is a monitor arm that can be installed by clamping onto poles with a diameter of 15 to 30mm, making it usable in various locations. Furthermore, using this monitor arm allows for a more spacious desk surface, and it can easily be moved back when not needed. Why not give it a try?

• Other fixtures and fittings

This is a monitor arm that can accommodate a laptop stand and a 27-inch monitor. By using this product, you can avoid placing your laptop on the desk, allowing for more efficient use of space. Additionally, the arm's fastening parts are separate, enabling you to adjust the height of the laptop and the LCD monitor individually. Furthermore, the laptop arm can also be used as a monitor arm by removing the top plate.

• Other fixtures and fittings

Monitor stand - dual model. This monitor stand is compatible with LCD monitors up to approximately 78 cm wide (under 8 kg). It also includes a clamp that can be attached to a desk hole. Additionally, the width between the monitors can be adjusted by sliding, and the height of the arms can also be changed.

• Other PCs and OA equipment

We spoke with Mr. Ito, Mr. Honma, and Mr. Itakura from Mishima Kousan Co., Ltd., who have introduced the overwhelmingly cooling "Refrigerated Suit 3." The "Refrigerated Suit 3" is a work vest that cools overwhelmingly with a super cold plate and a powerful fan. It maintains coldness with a Peltier plate installed on the back while featuring strong fans on both sides to draw heat out from inside the clothing!

• others

It has expanded by 16 cm wider than the conventional size of 44 cm. This plate is recommended for transporting wide items such as copiers and outdoor units.

• Trolley

We spoke with companies using the variable handle type electric stair-climbing cart. Total sales of the series have surpassed 3,000 units. Electric stair-climbing cart with variable handle type https://www.thanko.co.jp/shopdetail/000000001060/ This electric transport cart allows for easy transportation of heavy loads up and down stairs.

• Transport machinery

You can easily transport heavy luggage that is difficult to carry by hand using a cart. It is possible to move over bumps and stairs while keeping the luggage on the cart. The three wheels support going up and down stairs. When moving on flat ground, you can pull out the legs with auxiliary wheels for stable travel. Additionally, the compact size allows the platform to be folded, making it easy to fit in a car for transportation.

• Transport machinery

It is a step ladder that can also be used as a cart. The step ladder and cart have combined. It is foldable and doesn't take up much space. When left out, it becomes a convenient step ladder as well as an aluminum cart.

• Small baggage lift

Blocks strong summer sunlight and cuts UV by 99.9%. Moreover, since it can be worn on the back, it is a hands-free parasol that keeps your hands free. It can block the intense summer sunlight that is difficult to avoid when using both hands for tasks, cutting UV by 99.9%. The ultraviolet protection factor (UPF) is also at the highest rating of 50+, protecting you from UV rays, and it creates shade, making it easier to see the screens of tablets and smartphones. The hands-free, wearable parasol provides solid support for those working outdoors in the summer.

• others

Exposed to the hot sun while working on-site or in stuffy indoor jobs, the heat can be overwhelming... For you, we recommend Sanko's full-body water-cooled suit! Now upgraded with an expanded cooling range to include the lower body in addition to the upper body, it has made its debut. By filling the tank on the back of the suit with ice water, cold water circulates through the hoses to cool down your body. The water-cooled suit is slim and can be worn under uniforms. Additionally, it can be used as just a vest depending on the scene or situation. It is also ideal for those working in protective clothing, in dusty interior work, or for those working in greenhouses or gardening.

• Safety and consumables

The two cooling units on the back of the vest cool the body powerfully. Wearing it under fan-equipped clothing enhances the cooling performance. It is a full harness-compatible model, which is great for high-altitude work. The two cooling units on the back of the vest cool powerfully at a maximum of -14 degrees (※). It uses a Peltier system, similar to that of a small refrigerator. It takes just 3 seconds after turning on the power for the cooling units to start cooling. It quickly cools the body even over clothing. This is a powerful cooling item to help you get through the hot summer. Please feel free to consult us when you need assistance. 【Specifications】 ■ Size: M to 3L (fits chest sizes up to 160cm) ■ Contents: Main unit, Japanese instruction manual ■ Power supply: Requires a separate mobile battery ■ Operating time (when using a 10000mAh battery) - High: 3 hours - Low: 4 hours ※ Cooling performance may weaken depending on the usage environment and the performance of the mobile battery. ※ For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Coolyuk 2" is a backpack that can be cooled using the Peltier method. It can achieve a temperature difference of up to -14°C compared to the ambient temperature. With just the push of a button, it offers two cooling modes: strong and weak. It is designed to be powered by a mobile battery and is a free-size backpack type, allowing for discreet wear. 【Specifications (partial)】 ■ Size: Width 400 × Depth 250 × Height 75 (mm) ■ Weight: Approximately 900g ■ Length of adjustment belts ・Shoulder adjustment: 400–800mm ・Side adjustment cord: 700–900mm ■ Power supply: USB 5V 2.0A or higher recommended *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

This is a battery-operated fan with a belt type that wraps around the waist. The wind blows through your clothes. The key feature is its hands-free design, allowing for comfortable use simply by wrapping it around your waist. You can choose from four wind speed levels, and the built-in battery allows for continuous use of up to 4.5 hours. The belt is made of elastic rubber material, accommodating waist sizes from 60cm to 100cm. The parts that touch the body are made of soft material, providing a gentle and comfortable fit.

• Safety and consumables

The "Refrigerated Clothing 3" is an overwhelmingly cooling work vest featuring an ultra-cold plate and a powerful fan. It maintains coldness with a Peltier plate installed on the back while two strong fans on both sides draw heat away from inside the clothing! By using a 10,000mAh (sold separately) USB mobile battery, it can be used for up to approximately 3 hours and 30 minutes. By replacing the battery, it can be used all day long. 【Features】 ■ Cooling starts in 3 seconds, overwhelmingly cooling with an ultra-cold plate and powerful fan ■ Collaboration with a specialized workwear manufacturer allows for a variety of colors and sizes ■ Using a 10,000mAh USB mobile battery allows for up to approximately 3 hours and 30 minutes of use (can be used all day long by replacing the battery) ■ Parts can be easily removed and washed thoroughly * For more details, please refer to the PDF document or feel free to contact us. * Sizes 3L and 5L have sold out for this season due to popular demand.

• Heating and cooling equipment and facilities

Seven new models of the Dino-Lite microscope have been released, significantly enhancing image quality and features. They are equipped with new functionalities such as 4K ultra-high definition, depth measurement for three-dimensional objects (DPQ), enhanced LED control (eFLC), and a positioning pointer (APL). The Dino-Lite Edge series is a new lineup of Dino-Lite that caters to a variety of applications, from advanced research with high image quality, a wide range of magnification, and a newly designed body, to everyday business and home use, all while improving productivity and efficiency. 【New Features】 ■ 4K Ultra High Definition… Equipped with an 8-megapixel sensor ■ Depth Measurement for 3D Objects… Real-time measurement of depth between any two points ■ Enhanced LED Control… Brightness can be finely adjusted ■ Positioning Pointer… Displays the center point with laser light for easy positioning ■ Wi-Fi Module Compatible… Enables wireless operation and improved usability 【Other Convenient Features】 ■ Super Depth of Field Function… Achieves focus over a wide range even on objects with protrusions ■ Expanded Dynamic Range Function… Reduces loss of detail in dark areas and prevents overexposure *Features may vary by model. Please refer to the product documentation for details.

• others

The "Heat Wind Circulator with Guard" detects heat at the bottom of the unit, converts it into energy, and drives the fan to rotate, making it a fan for stoves. Recommended for those who have concerns like "It's cold far from the stove" or "The room doesn't warm up easily." It senses the heat from an oil stove at the bottom of the unit, converts it into energy, and the fan rotates. Therefore, it requires no power supply and is an eco-friendly heating device. 【Features】 ■ Usable with stoves that become high-temperature at the top ■ Can be used with flat surfaces that reach high temperatures (85°C to 350°C) ■ Efficiently warms up the room *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

"Hippali-kun" is an electric assist towing vehicle capable of carrying 1 ton. Due to labor shortages, there is an increasing demand for efficiently transporting heavy loads and materials. Therefore, we invite you to consider the introduction of the electric assist towing vehicle "Hippali-kun," which can carry up to 1 ton (1000 kg). It allows one person to easily transport a cart, enabling efficient work. Not only does it improve work efficiency, but it also reduces the burden on the operator. The maximum load capacity is 1000 kg, with a travel speed of 2 to 6 km/h, and the estimated operating time is 2.5 hours. [Features] - Burden reduction × Efficiency - Easy operation at hand - Speed adjustment - Automatic/manual switching - Battery-powered, emergency stop button, handle angle adjustment, tire cover *For more details, please refer to the PDF document or feel free to contact us.

• Trolley

"Denki Tepokka" is a USB-powered heated glove with anti-slip features. It has three levels of warmth that can be adjusted to your preferred temperature. The drawstring cord blocks out the cold. Two mobile batteries are included. Additionally, the size is 22 cm in hand length and 23 cm in hand circumference, with a wrist circumference of 20 to 24 cm. The weight of the main unit is approximately 190 g combined for both hands. 【Features】 ■ Touch panel compatible ■ Anti-slip design ■ Drawstring cord to block out the cold ■ Built-in 5000mAh battery, can be used without cables ■ Three levels of warmth, adjustable to your preferred temperature *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Desktop Cardboard Shredder" is a product that can create cushioning material. With its special cut, the shredded cardboard becomes mesh-like. It can be used directly as cushioning material or packaging material. By utilizing used cardboard, which would otherwise be discarded, as cushioning material, not only can you reduce the disposal costs of cardboard, but you can also lower the costs of purchasing cushioning materials. 【Features】 ■ Plastic-free ■ Cost reduction ■ Waste reduction ■ Environmentally friendly ■ Free samples of cushioning material available *For more details, please refer to the PDF document or feel free to contact us.

• shredder

This is a heated vest with five built-in heaters. It warms up in 10 seconds and can operate for 5 to 8 hours with a 10,000mAh battery. The size can be adjusted in four stages using the side zipper. The degree of closeness significantly affects warmth, allowing it to fit snugly on various body types and effectively warm the body. Made with water-repellent ripstop fabric, it is tougher and resistant to dirt, rain, and tearing. 【Features】 ■ Powerful heating with five heaters ■ Adjustable temperature ■ Powered by a USB mobile battery ■ Washable and hygienic *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

This product is a cart that can be smoothly pushed on flat surfaces and easily ascends stairs as is. The maximum angle of stairs it can operate on is 35 degrees. It is cordless and battery-operated, with a usage time of approximately 80 minutes, allowing for extended use. When not in use, it can be folded up, taking up minimal space. 【Features】 - Can be safely used with a light that illuminates the feet in dark warehouses - Can be folded for storage when not in use and stands on its own - Capable of carrying loads up to 150 kg - Maximum angle of stairs it can operate on is 35 degrees - Cordless and battery-operated *For more details, please refer to the PDF document or feel free to contact us.

• Small baggage lift

The "C-LRS21W" is a stand magnifier with a light that can be used for detailed work. The 72 LED lights can be adjusted to 10 levels of brightness and can be changed to three different colors. The stand, which is easy to move thanks to its casters, can change height by adjusting the number of poles, allowing it to be used while standing. The arm section is a sturdy spring arm that does not wobble, ensuring a secure position. 【Features】 ■ LED light magnifier for easy visibility ■ Height adjustable ■ Easy to move with casters and tray ■ Comfortable for work *For more details, please refer to the related link page or feel free to contact us.

• Other office supplies

This is a set of an electric cart that can easily go up and down stairs with heavy loads, along with attachments that make transporting fixtures, building materials, and tatami mats easier.

• Specially equipped vehicles

This is a cart that can smoothly move on flat surfaces and easily ascend stairs. The cart itself is lightweight, making it easy to move. It can carry loads of up to 60 kg. The maximum load capacity is 60 kg, and it can operate on stairs with a slope angle of up to 35 degrees. It is battery-operated and cordless, with a usage time of approximately 40 minutes* for extended use. *When carrying a load of 60 kg. The drive belt on the back of the cart is made of non-slip rubber with a tread pattern similar to that of a caterpillar, allowing it to ascend and descend stair steps. When in use, the drive belt is tilted to create an angle, ensuring that the entire belt makes contact with the stairs as it moves forward. The maximum angle for usable stairs is 35 degrees, and the travel speed allows for approximately 25 steps per minute in both ascent and descent. It is smaller than a medium-sized hand truck (a foldable hand truck with a load capacity of about 300 g), making it maneuverable and capable of navigating narrow stairs in places like apartments. It can be easily operated by women, allowing for effortless transportation without requiring much strength.

• Vending machines

■Simultaneous shooting with 6 cameras ■Easy-to-read 11-inch large monitor ■Supports microSD cards up to 256GB! ■Power supply compatible with 12V to 48V! ■Includes extension cables of 15m, 5m, and 3m

• others

■Tatami compatible ■Large building materials compatible ■Height 2m compatible ■Weight 100kg

• Trolley

■Washable material ■Heater section has 5 locations! (Under the neck, 2 at the waist, 2 at the chest) ■Free size adjustable from M size to 3L size ■Warmth can be adjusted in 3 levels! ■Operating time is 7-8 hours (when using a 10,000mAh battery in high mode)

• others

● This is a 360-degree movable industrial endoscope with a tip camera diameter of 6.6mm, capable of withstanding high temperatures up to 120 degrees. ● By connecting the cable to the compressor, air is discharged from the tip camera, allowing it to be used even at high temperatures of up to 120 degrees. ● The tip camera operates smoothly with stick control, enabling you to easily position the camera where you want to check. ● The flexible cable, 1 meter long, is equipped with IP67 waterproof functionality. ● Additionally, it features an LED light with six levels of brightness adjustment, allowing you to view and capture images at your preferred brightness.

• Other measuring instruments

This is a dedicated attachment for our "Stair-Climbing Cart"! The highly acclaimed "Stair-Climbing Cart" is an electric cart equipped with caterpillars that can ascend and descend stairs. This product allows for fully customized attachments made to fit your cargo! 【Features】 ■ Fully customizable to fit your cargo! ■ Maximum load capacity of 160kg ■ Price starting at 64,800 yen～ 【Track Record】 ■ Introduced by a major copier manufacturer! Attachment for copiers ■ Attachment for bottle dispensers ■ Attachment for tatami mats (We responded to requests from tatami shops nationwide!) *The photo shows an attachment for multifunction printers.

• Trolley

The "Electric Stair-Climbing Cart with Adjustable Handle" is a cart that can ascend and descend stairs while carrying heavy loads. It features an electric caterpillar on the back of a medium-sized hand truck, allowing for smooth operation on flat surfaces and easy climbing of stairs. With a maximum load capacity of 160kg, it can handle stairs with a slope angle of up to 35 degrees. It is cordless and can be used for approximately 80 minutes on a rechargeable battery. 【Features】 ■ Simple operation with a single button at hand ■ Maximum load capacity of 160kg, stair slope angle of 35 degrees ■ Compact size allows for use on narrow stairs ■ Cordless with a rechargeable battery ■ Improved operability with an adjustable handle *For more details, please download the PDF or contact us. 【Direct Contact Information】 Phone: 03-3526-4321 Email: sales2@thanko.jp

• Small baggage lift

This is a dedicated option camera for the Premier plumbing endoscope, which brightly illuminates the inside of pipes with 42 LED cameras. It can be used in combination with the wing-shaped attachment/ball-shaped attachment included with the Premier plumbing endoscope. *For more details, please refer to the product page. Feel free to contact us as well. [Direct Contact Information] Phone: 03-3526-4321

• Work tools

This is a pipe inspection camera with a long camera cable over 300m, suitable for long piping. It automatically counts the distance extended, so you can easily know how far the camera has progressed. Equipped with an auto-leveling feature, the camera can maintain a level position even when it rotates. The tip of the camera has a spring, allowing it to easily navigate through twisted and complex areas. The camera has a diameter of 28mm and is equipped with 12 LED lights. With these 12 lights, it illuminates dark pipes brightly, allowing for clear viewing on the monitor.

• Piping and insulation

This is a "3-axis flexible monitor arm" compatible with LCD monitors with a maximum load capacity of 10 kg. It is quite sturdy and well-built, providing solid support for larger monitors! Additionally, it allows for 360-degree rotation of the monitor, easy height adjustment, and features two clamps for secure attachment, making it an inexpensive monitor arm that rivals more expensive options! Available in two colors: black and white.

• others

This product is a plate for a cart that can be fixed to an "electric stair-climbing cart" for transporting items up and down stairs. The weight is 3400g. It comes with the main body, 8 screws, 4 plates, 8 butterfly nuts, and a Japanese instruction manual. It is recommended that the installation work on the cart be done by two or more people. Please be careful to avoid injury during the installation process. 【Specifications】 ■ Size: Width 475 × Height 25 × Depth 620 (mm) ■ Weight: 3400g ■ Accessories: Main body, 8 screws, 4 plates, 8 butterfly nuts, Japanese instruction manual ■ Warranty period: 12 months *For more details, please refer to the PDF document or feel free to contact us.

• Other elevators and transport systems

The "360-Degree Articulating Pipe Endoscope 60M" is a high-performance endoscope with a camera that moves 360 degrees horizontally and 180 degrees vertically, featuring a tip diameter of 50mm. It is equipped with six LED lights that have a dimming function. The camera is made with sapphire glass. The monitor is a large 10-inch color display, providing clear images on a big screen. *This product is available for pre-order and made-to-order.* 【Features】 ■ 360-degree horizontal and 180-degree vertical articulation ■ Cable length: 60M ■ Camera diameter: 50φ ■ LCD monitor: 10 inches *For more details, please refer to the PDF document or feel free to contact us.* 【Direct Contact Information】 Phone: 03-3526-4321 Email: moriguchi@thanko.jp [Attn: Moriguchi] ◆ An online shopping site that allows cash on delivery has opened ◆ ↓ For details, please see below.

• others

The "Drowsiness & Distraction Driving Warning System Eye Catcher" warns of drowsiness and distracted driving with sound and messages. It detects the vehicle's speed using GPS functionality and controls the warning alarms. With advanced facial recognition and pupil detection, it monitors the driver's eyes and prompts attention for yawning or distracted driving while looking at a smartphone. The detection time is just 1 second, with no time lag after closing the eyes. This device serves as an effective measure to prevent drowsy driving, inattention, and accidents. 【Features】 ■ Detects drowsiness and distraction in just 1 second and issues a warning ■ GPS-enabled, providing warnings only while driving ■ Monitors only when necessary ■ Warnings and alarms tailored to the situation ■ Easy installation and usage ■ Capable of detection in any situation or condition ■ Automatically starts detection when the engine is turned on ■ Compatible with standard car batteries (DC12V) and batteries for long-distance trucks (DC24V) 【Direct Contact Information】 Phone: 03-3526-4321 Email: moriguchi@thanko.jp [Attn: Moriguchi] ◆ An online shopping site with cash-on-delivery options is now open◆ ↓ For more details, see below

• Other analytical equipment

The "Electric Stair-Climbing Cart" is a cart that can ascend and descend stairs while carrying heavy loads. It is equipped with a drive belt on the back that has a tread pattern similar to that of a caterpillar. Despite its compact size, it is powerful with a maximum load capacity of 160 kg. 【Features】 ■ Ascends and descends approximately 28 steps per minute ■ The drive belt is made of non-slip rubber ■ Can be used as a cart on flat surfaces *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Small baggage lift