レックス List of Products and Services

The DOP-01 is a compact, portable fluorescent oxygen meter that allows for immediate DO measurement. It can measure in environments where stirring is difficult and there is no flow, as there is no self-consumption of oxygen. There is almost no measurement error due to influences such as hydrogen sulfide or pH fluctuations. Additionally, since it does not use electrolytes or lead, there is no concern about the leakage of harmful substances due to membrane damage. 【Features】 ■ Portable ■ Long-term no maintenance ■ No flow required ■ No influence from interfering substances ■ Safe and hygienic design *For more details, please refer to the catalog or feel free to contact us.

• Other analytical equipment
• Measurement and analysis equipment leasing and rental

The "BLWL-B-500KNSA3" is a center hole type load cell that is ideal for measuring the tension of anchors. It can measure the loads applied to newly installed earth anchors, PC anchors, and tunnel arch supports. 【Features】 ■ Center hole diameter and outer diameter compatible with Aki-Mos ■ Waterproof structure IP67 (JIS C 0920) suitable for field use ■ Optimal for load measurement of newly installed earth anchors, PC anchors, etc. *For more details, please refer to the catalog or feel free to contact us.

• Other analytical equipment

The "enviro Flu-HC" is a high-precision UV photometer that can measure the concentration of dissolved oil in water with a resolution of 0.1 ppb. Its compact and lightweight design allows for easy installation and operation in the field. By connecting to a PC with the included software, it can measure and display oil concentration in real-time. Using it in as dark an environment as possible will yield more accurate measurements. 【Features】 ■ Digital display of measurement data ■ Automatic recording in memory ■ Set alarm threshold values and output alarms ■ Analog output signal for analog monitoring ■ Data output from a PC using Wi-Fi functionality *For more details, please refer to the catalog or feel free to contact us.

• Water quality/pH measuring device

The "ProDSS" is a portable multi-water quality meter that can measure a wide range of important water quality parameters with a digital sensor. It adopts a digital sampling method and can measure up to 13 parameters, including turbidity, pH/ORP, resistivity, and total dissolved solids (TDS). With a rugged design, it is easy to handle and suitable for various applications. 【Features】 ■ Capable of measuring up to 13 parameters ■ Easy-to-read color display with backlight ■ Large memory capacity of over 100,000 entries ■ Durability to continue sampling even in harsh field environments ■ No need for recalibration when changing sensors *For more details, please refer to the catalog or feel free to contact us.

• Water quality/pH measuring device
• Measurement and analysis equipment leasing and rental

"Elefoot" is a ground bearing capacity testing device that measures the support capacity of surface soil in a simple manner. By utilizing a person's body weight as a reaction force, there is no need for large equipment such as heavy machinery or power supplies. In addition to a short measurement time, it can be operated by a single person and is capable of measuring in confined spaces. 【Features】 ■ Extremely short measurement time, can be operated by one person ■ Capable of measuring ground bearing capacity in confined spaces ■ Lightweight and easy to carry ■ Ideal for soil conditions with low viscosity, such as clay to sandy soils ■ Capable of measuring bearing capacities from 0 to 4375 kN/m² *For more details, please refer to the catalog or feel free to contact us.

• Geological Survey

The "HG-2001" is a JAS standard machine-grade classification lumber measuring device that allows for the grading of structural lumber made from coniferous trees simply by striking it with a hammer, without damaging the test material. It enables full inspection of the strength classification of lumber used in the design phase without causing any harm. It can be easily transported to lumber mills, precut factories, and construction sites, serving as a compact grading machine. As a non-destructive wood strength Young's modulus measuring device, it is certified by the National Association for Wood Inspection and Research, which is an accredited body for structural lumber. 【Features】 ■ Easy to operate for anyone ■ Does not damage the material ■ Lightweight and compact design ■ Certified by the National Association for Wood Inspection and Research *For more details, please refer to the catalog or feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "FT6380" is a slim sensor with a width of 20mm, designed for measuring ground resistance in tight spaces. Ground resistance measurement is specifically for multiple grounding in electrical equipment and chemical plants. It also supports leakage current measurement on power lines and load current measurement up to 60A. This product allows for cable clamping with a light grip using two fingers, enabling the task to be performed with half the force compared to conventional methods. 【Features】 ■ Power ON, ready for immediate measurement ■ Alarm function provides audible feedback on results ■ Sensor design supports high accuracy ■ Easy-to-read LCD display ■ Reliable storage of 2000 data points For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "AM-101" is a portable PMV meter that allows for automatic measurement with a set sampling interval. It independently measures air temperature, globe temperature, air velocity, and humidity, and calculates the PMV and PPD values, which are indicators of thermal environment as specified in ISO 7730. 【Features】 ■ Portable type for easy transport ■ Automatic measurement with set sampling interval ■ Data memory for 1,000 readings ■ Graphic display and data memory achieved through dedicated software For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "equotip550" is an ideal hardness testing machine for on-site testing of heavy large parts or assembled components. By exchanging the impact device, it accommodates a wide range of hardness scales. Furthermore, the compact portable model can be used in various locations, including on-site, in factories, and in laboratories. The use of icons makes touch screen operation even easier, and the user interface features a clear design for smooth operation. 【Features】 ■ High-resolution display ■ Comes with a cover to prevent scratches and dirt on the monitor when not in use ■ Testing accuracy of ±0.8μm, with high precision and excellent reproducibility of up to ±1.0HRC ■ Ability to incorporate unique conversion curves ■ Usable on thin parts; suitable for pipes and irregular materials For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "NST-2/LT" is a high-precision non-destructive testing measurement device that can measure without stripping the paint or plating of the object being measured by efficiently generating surface waves at 500KHz. By placing the sensor of the "NST-2/LT" against a support pillar and introducing ultrasound, it explores the depth of underground burial. In addition to the protective fence posts (steel protective fences and ground reinforcement rebar), it is also capable of measuring rock bolts, anchor bolts, and sheet piles. 【Features】 - Achieves improved mobility and operability in addition to being compact and lightweight - Adopts a shoulder-carrying method (shoulder type) - Significant increase in driving energy for the probe due to the adoption of a square excitation method - Low power consumption - NETIS registration number: KT-060039-V (technology for promotion of utilization) For more details, please feel free to contact us.

• Non-destructive testing

The "PORTA2 A80Mf" is a product handled by Rex Co., Ltd., which rents out measuring instruments such as measuring devices, scales, and surveying equipment. This product is a device for observing celestial bodies, and you can start observing simply by pointing it in the desired direction. It comes with an erecting zenith prism, allowing you to enjoy terrestrial scenery as well. *For more details, please feel free to contact us.

• Other measuring instruments

The "EPOCH650" is a digital flaw detector that balances portability, operability, and high performance. It features a menu structure designed for work efficiency and direct access keys, making it easy to achieve high-quality flaw detection tasks. Additionally, it is equipped with a digital high dynamic range receiver, a PerfectSquare pulser, and various digital filters, allowing it to flexibly adapt to a wide range of applications. 【Features】 ■ Compliant with EN12668-1 ■ PerfectSquare: Adjustable rectangular wave pulser ■ Full-screen A-scan display ■ 30 types of digital receiver filters to enhance the signal-to-noise ratio ■ User-friendly operability *For more details, please feel free to contact us.

• Non-destructive testing

"CheckCars" is a warning system that detects vehicles exceeding any set speed and alerts drivers and those nearby, as well as notifying of approaching vehicles when installed on poorly visible roads. It can also identify the direction of vehicle movement, allowing it to specifically alert for vehicles going in the wrong direction. Using microwave radar, it is largely unaffected by heat, rain, fog, or snow, and there are no issues with direct sunlight. 【Features】 ■ Equipped with a "Doppler sensor" ■ Detection range of approximately 100m ■ Extremely low rate of false alarms ■ Identifies approach and departure with a single sensor ■ Easy installation and setup ■ NETIS registration number: HK-120036-VE *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "Eye-Checker" is a simple speed violation enforcement system that activates infrared lighting and starts recording video with a surveillance camera when it detects a vehicle exceeding the detection speed. It can measure the speed of moving objects from 1 km/h to 200 km/h! The internal switch of this device allows for the setting of approach and departure configurations for each channel of the vehicles to be detected. This system is designed to enforce speed violations for vehicles within factory premises or construction sites. When a vehicle is detected traveling above the set speed, the surveillance camera's recording function is activated, and a 10-second video is saved to an SD card. 【Features】 ■ Doppler Sensor - Capable of measuring the speed of moving objects from 1 km/h to 200 km/h ■ Camera Unit - Built-in SPD (surge protection device) for power supply - Can save color video in bright conditions and black-and-white video in dark conditions ■ NETIS Registration Number: HK-120036-A *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "WCM-4" is a welding management monitor that can be connected with one touch while wearing gloves, automatically recording inter-pass temperature and necessary welding conditions. When welding is completed, if the inter-pass limit temperature is exceeded, an alarm buzzer will sound, and it will stop when the temperature drops, allowing welding to resume. Additionally, if the heat input exceeds the limit at the intermediate point of welding, an alarm buzzer will sound. By slightly increasing the welding speed, the average heat input can be reduced. 【Features】 ■ Alarm buzzer for exceeding limit temperature ■ Alarm buzzer for exceeding heat input ■ Welding records can be easily edited on a computer ■ Usable for both DC and AC welding ■ Easy operation *For more details, please feel free to contact us.

• Other measuring instruments

The "DSX110" is a digital microscope that achieves high-quality images, intuitive operation, diverse observation methods, and excellent reproducibility. It also supports extended focus functionality, 3D imaging, a wide range of stitching imaging, and programmed sample imaging. Designed with actual work in mind, the report system enables smooth sharing of measurement and analysis results. Reports can be created with a single click and can be exported in various formats. 【Features】 ■ Advanced optical and digital technology ■ Easy operation for capturing images, similar to using a smartphone or tablet ■ Capable of advanced measurements such as 3D measurement and particle analysis ■ Reports can be created with a single click and exported as well *Please feel free to contact us for more details.

• Measurement and analysis equipment leasing and rental

The "FC-1" is a system that measures the speed of a moving vehicle and displays the speed on an LED display to help control the vehicle's speed. When the vehicle exceeds the set speed, the LED display board, patrol lights, and audio alerts warn the driver of the speed violation and encourage safe driving. It can also be used to ensure the safety of workers during road construction. 【Features】 - An energy-saving system that only displays when a moving vehicle passes by - Utilizes a large, easy-to-read LED display - Alerts attention by flashing red LEDs simultaneously with speed display - Convenient to carry, with an installation time of approximately 5 minutes - Flexible customization options available *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "HELIOT901W1-J1A" is a quality inspection device with a helium exhaust speed of 5L/sec that detects even the slightest leaks, and can be operated from 40 meters away using a wireless controller. It achieves a helium exhaust speed of 5L/sec with LTRA flow. The maintenance panel can be easily removed, allowing for easy access to various components, and it also features a work procedure explanation screen. 【Features】 ■ High exhaust capacity ■ Adoption of a tablet-type controller independent from the main unit ■ Intuitive operation ■ Excellent maintainability ■ The vacuum method can detect hydrogen in addition to helium *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "Model P7-302AQM" is an atmospheric environment measuring device that integrates a particle counter, temperature and humidity meter, mass concentration conversion function (PMμg), CO2 sensor, and TVOC sensor, enabling ideal ventilation rate monitoring. With its smart battery function, it can measure on-site for a month on a single charge, and there is no data loss even during network downtime. 【Features】 ■ Built-in particle counter ■ Environmental sensors 　・TRH (temperature and humidity sensor probe, CO2 sensor (NDIR), TVOC sensor (PID)) ■ PM mode μg/m3 (mass concentration conversion) ■ Remote operation of the device from a computer ■ Smart battery (5 hours of continuous use) *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The VANTA C series "VCR-CCC-A3-J" is a portable analyzer that can quickly and non-destructively analyze the elemental composition of materials from ppm to 100% concentration. It allows for easy and high-precision analysis results to be obtained on-site without moving, cutting, or disassembling the inspection target, contributing to the efficiency of inspection work and cost reduction. 【Features】 - Robustness and durability to withstand harsh operating environments - Excellent analytical performance - User interface that allows for intuitive operation - Easy operation and improved inspection efficiency - Portable *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

"HESAR" is an alarm device that can be immediately used by simply installing it on heavy machinery and registering the tag IDs from a setup PC. There is no need for application development or complicated wiring, and it can simultaneously check up to 100 workers, heavy machinery, and vehicles at once. Additionally, the alarm area can be easily changed by switching the alarm range adjustment switch (16 levels) within the alarm device. 【Features】 ■ Ready to use immediately ■ Can recognize up to 100 tags simultaneously with one unit ■ Capable of distinguishing between workers, heavy machinery, and vehicles ■ The device is sturdy and detachable ■ The alarm area can be adjusted from approximately 0.5 to 10 meters ■ NETIS registration number: KT-130008-VE *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "IPLEX NX" is an industrial videoscope that provides bright and high-definition images even in large spaces, thanks to its high-resolution imaging sensor, high-brightness laser diode light source, image processing technology, and unique lens synergy. In visual inspections, its high-quality image quality allows for clear identification of problematic areas and defect zones, enabling inspectors to make accurate judgments. 【Features】 ■ Overwhelming high image quality and brightness ■ Control of noise reduction (NR) algorithms ■ Large touch screen monitor ■ Comfortable operability *Please feel free to contact us for more details.

• Measurement and analysis equipment leasing and rental

The TG-4 is a tough series waterproof digital camera equipped with a bright F2.0 lens, microscope mode, various underwater modes, GPS, and a range of shooting functions that ensure you won't miss the best moments even in harsh environments. It also offers a comprehensive system with converter lenses and sports holders. Ideal for those who enjoy hard sports like diving and mountain climbing, it is also suitable for use in harsh locations such as construction sites due to its waterproof, dustproof, shockproof, load-bearing, and low-temperature resistant features. 【Features】 ■ High image quality ■ Equipped with a bright F2.0 lens ■ Capable of shooting that brings out the performance of F2.0 ■ Waterproof, dustproof, shockproof, load-bearing, and low-temperature resistant *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "RWP-750A" is a product for measuring and managing vehicle weight. It consists of a detection unit that detects weight by placing tires on it and an indication unit that displays, records, and prints the measurement results. Unlike fixed truck scales that measure the weight of the entire vehicle placed on the detection unit, this portable model can be easily transported and allows for weight measurement not only within factory premises but also at construction sites on solid surfaces. To measure weight, set the unit on a flat paved surface and sequentially place the front tires onto the center of the detection unit, pressing the measurement key each time to complete the measurement. Additionally, pressing the print key will print the measurement results. 【Features】 ■ Integrated ramp structure ■ Robust integrated handle structure ■ Miniaturization and lightweight design of the indication unit (with built-in battery) ■ Data transfer to PC via USB memory *Please feel free to contact us for inquiries.

• Other measuring instruments

The non-destructive ultrasonic thickness gauge 'UTM-110' features a large display and keypad, enhancing usability. Simply turn on the power and perform zero-point calibration with the test piece to easily take measurements. 【Features】 ◎ Ergonomic design focused on grip comfort ◎ Improved operability with a large display and big keypad ◎ Hold function that keeps the display on even when the probe is removed from the measurement target ◎ Data logger function allows for saving up to 1000 measurement results with timestamps ◎ Direct recall function to access sound speeds by material through key operation ◎ Can be used continuously for over 50 hours with a single AA battery *Ergonomic design: A design optimized based on the field of study known as ergonomics, allowing people to handle it more naturally, comfortably, and efficiently. *Please feel free to contact us for inquiries.

• Other measuring instruments

The dioxin air sampler "HV-RW" is an all-weather high-volume sampler designed for installation, capable of collecting harmful substances from the atmosphere at a high flow rate. It has a wide flow rate setting range of 100L/min to 1200L/min. The constant flow device helps to suppress the decrease in suction flow rate due to increased sampling volume. It features a touch panel LCD screen (with backlight) and utilizes a "quick clamp knob" for the filter case attachment. 【Features】 ■ Flow correction function ■ Quiet design ■ Constant flow function ■ Error item recording function ■ If the air being drawn into the device becomes too hot, a temperature protection device activates to stop the blower motor. *For more details, please feel free to contact us.

• Environmental Survey

The "XA-4400II" is a wearable multi-gas detector that simultaneously measures and displays four types of gases: methane, oxygen, hydrogen sulfide, and carbon monoxide. It can be used in environments with strict explosion-proof standards, such as hydrogen and acetylene atmospheres, classified as Exia II CT3X. Workers can wear it in various factories, work sites, inside tanks, manholes, tunnels, and other underground construction sites to ensure the safety of the work environment and the safety of the workers. 【Features】 - Operates for one week on a single battery - Significantly improved impact resistance compared to previous models - Loud alarm, lamp, and vibration for alerts - Compact and lightweight design - Waterproof and dustproof structure (equivalent to protection class IP67) *For more details, please feel free to contact us.

• Sanitary fixtures

The "ProfoScope" is an electromagnetic induction rebar detector that features an intuitive user interface. It is capable of detecting rebar in concrete structures, measuring cover thickness, and estimating rebar diameter. With the integration of the display device and sensor, it is cordless. When the target on the screen captures the rebar, it notifies the user with LED light and sound, enabling quick measurements. 【Features】 ■ Identification of rebar position ■ Specification of cover thickness ■ Estimation of rebar diameter *For more details, please feel free to contact us.

• Structural Survey

The "GSD-720K-R" is a durometer (rubber and plastic hardness tester) that complies with various domestic and international standards. It conforms to JIS K 6253 (new JIS). This model features a peak hold function, making it effective for measuring the hardness of elastomers where the maximum value can be difficult to read due to relaxation phenomena. 【Features】 ■ For high hardness ■ Compatible with stand installation; pressure application surface φ18mm durometer ■ Can also be used for manual measurement *For more details, please feel free to contact us.

• Other analytical equipment

The UTM-110 is an ultrasonic thickness gauge featuring an ergonomic design that emphasizes grip comfort and a hold function that prevents the display from disappearing even when the probe is removed from the measurement target. With a large display and a big keypad, usability is improved. Simply turn on the power and perform zero-point calibration with the test piece to easily take measurements. The zero-point calibration test piece incorporates an oil reservoir mechanism to prevent the contact medium from dripping, keeping the surroundings clean. Additionally, the zero-point calibration test piece can be illuminated, allowing for accurate probe placement even in dark environments. 【Features】 - Equipped with a data logger function that can save up to 1000 measurement results with timestamps. - Supports output to a computer via the included USB cable for recording measurement results and creating reports on-site. - Can be used continuously for over 50 hours with a single AA battery. - Features a direct recall function that allows users to call up sound speeds by material through key operations. *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The ultrasonic thickness gauge 'TI-56H' is designed for special applications such as measuring high-temperature objects, castings, and small-diameter pipes, featuring a compact and lightweight design. With the adoption of a dedicated measurement mode, stable measurements can be made on aluminum and resin as well. Thickness can be measured non-destructively by simply placing the probe on one side, making it ideal for measuring high-temperature objects. 【Features】 ■ Ready to use with just zero point adjustment and sound speed adjustment ■ Powered by one AA alkaline battery ■ Auto power off after 3 minutes of inactivity ■ Once the sound speed is adjusted, it is retained even when the power is turned off ■ LCD screen includes a coupling display function indicating ultrasonic reception *For more details, please feel free to contact us.

• Non-destructive testing

The wireless portable vehicle weight scale 'RWP-750A' is a product designed for measuring and managing vehicle weight. Being portable, it can be used not only in factories but also at construction sites as long as the surface is flat and paved. The screen uses illustrations and other visuals, making it very easy to read and highly user-friendly. To measure, simply place the tire sequentially from the front wheel onto the detection area and press the measurement key each time to complete the measurement. The results can be printed out by simply pressing the print key. 【Features】 ■ Integrated slope structure ■ Robust integrated handle structure ■ Miniaturization and lightweight of the indicator unit (with built-in battery) ■ Data transfer to PC via USB memory *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "Utility Scan/Structure Scan SIR-4000" is a high-performance GPR data recording device that allows for the construction of systems tailored to exploration purposes such as buried pipe detection and rebar detection. It features specialized data recording modes for specific purposes, including Quick 3D, Utility Scan (buried pipe detection), and Structure Scan (rebar detection). With a console panel rated IP65, it can be used even in harsh conditions. 【Features】 ■ Compatible with conventional GSSI analog antennas ■ Equipped with a high-resolution 10.4-inch LED display ■ User interface based on Windows 8 ■ Data can be recorded in the internal memory, with options for data transfer via USB and wireless LAN ■ Allows for direct connection of GPS devices to obtain location information during measurements *For more details, please feel free to contact us.

• Non-destructive testing

The handheld pH/ORP meter 'TPX-999Si' allows for simultaneous measurement and display of pH and ORP. It features a waterproof and dustproof IP67 body designed for field use, and an easy-to-read LCD with a backlight for use in dark environments. The operation details are displayed on the LCD screen, making it easy to set various measurement conditions. It includes an automatic calibration function that requires just a button press, an auto-hold function that automatically determines stable values, and interval measurement for automatic measurement and data storage at specified time intervals, among other features. 【Features】 ■ Convenient backlit LCD for dark environments ■ Large data memory capacity (up to 1000 data records) ■ Calibration data memory and electrode replacement records for work management ■ High-sensitivity sensor with a plastic body *For more details, please feel free to contact us.

• Water quality/pH measuring device

The handheld fluoride ion meter "TiN-5101" features a robust waterproof structure with an IP67 rating, making it effective for field measurements. It displays measurement values and calibration values simultaneously on a large LCD screen, and includes an automatic calibration function that requires just the press of a calibration key, as well as an auto-hold function that automatically determines stable values, making it very easy to operate and user-friendly. 【Features】 ■ Excellent chemical resistance and shock resistance ■ Regular checks of fluoride ion monitors (interval measurements) ■ Capable of measuring colored samples and cloudy liquids without issues *For more details, please feel free to contact us.

• Water quality/pH measuring device

The "QuintSonic7" is a non-destructive ultrasonic thickness gauge capable of measuring film thickness up to 5 layers at once. It can also measure film thickness on GFRP (glass fiber reinforced plastic) and CFRP (carbon fiber reinforced plastic). 【Features】 ■ Displays waveform images on the device's LCD using A-scan ■ Usable on coatings, lacquers, etc., on plastic, metal, wood, glass, and ceramic substrates *For more details, please feel free to contact us.

• Non-destructive testing

The combustion gas analyzer "testo350J" is an atmospheric concentration measuring instrument that complies with JIS standards, focusing on the measurement ranges required for environmental monitoring of SO2 and CO2, as mandated by the Air Pollution Control Act. In addition to smoke measurement and measurement certification, it is also ideal for the operation and measurement of combustion equipment such as boilers. It allows for real-time measurement of up to 6 gas components, including O2, CO, NO, NO2, SO2, and CO2. 【Features】 ■ Measurement starts just 30 seconds after startup ■ More accurate NOx measurement with actual NO2 measurement ■ Lightweight at approximately 5 kg ■ Remote operation and viewing possible via Bluetooth communication *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "DIK-311F" is a soil moisture meter that can measure volumetric water content in just a few seconds. With built-in software in the display unit, it can convert values for both inorganic and organic soils. The sensor is waterproof, allowing it to be buried in the soil. It can be used by switching between three measurement modes: inorganic, organic, and voltage. 【Features】 ■ Sensor can be buried ■ Measures volumetric water content of soil in just a few seconds ■ Calibration allows for more accurate measurements ■ Sensor comes with a 2m cable *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "Wire Expert" is a cable tester that allows for easy cable certification testing. It analyzes instantly and determines pass or fail. Both the local and remote units are equipped with a touch panel. It supports metal cable certification testing, as well as permanent link and channel testing. 【Features】 ■ Supports cable certification testing ■ Measurement frequency: 1 to 500 MHz ■ Testing time for Cat6A is within 11 seconds ■ Both local and remote units are equipped with a touch panel *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

"StructureScan" is a rebar detection device that achieves high resolution and high depth at a high frequency (2700MHz). The built-in touch panel features a high-resolution screen and high-speed processing technology for detailed visuals. It is ideal for detecting rebar, voids, cracks, and fissures within concrete. [Features] ■ Enables measurements in various scenes ■ Easy measurement on rough surfaces ■ Sturdy and compact design ■ High-resolution antenna *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "TDM-BIII" is a precision acoustic depth measurement device that significantly improves accuracy with sound speed correction. By using GPS and an automatic tracking total station, it guides the survey vessel along the measurement line, enabling the acquisition of three-dimensional coordinates. It is small, lightweight, and compact, and the necessary information can be automatically printed in real-time. 【Features】 ■ Compatible with GPS and automatic tracking total stations ■ Easy-to-read and user-friendly touch panel ■ Automatic real-time printing of necessary information ■ Significantly improved accuracy with sound speed correction ■ Low power consumption with continuous operation for 5 hours *For more details, please feel free to contact us.

• Measurement and analysis equipment leasing and rental

The "OmniScan SX PA" is an ideal phased array ultrasonic flaw detector for inspections such as weld inspections, corrosion mapping, and composite material inspections. Despite its compact and lightweight design, it features a large 8.4-inch touchscreen for comfortable operation. It also supports TOFD weld inspections and component inspections. 【Features】 - Single-loop configuration for simple operability and cost performance - Compatible with 2-axis encoders and data storage functionality - Bright and large touchscreen interface - Compact and lightweight design *For more details, please contact us.

• Measurement and analysis equipment leasing and rental

The "TKR11P" and "TKR11M" are pressure and full water test recorders developed to improve quality control in equipment piping work and to enhance the efficiency of organizing and creating test records. They can record continuously for up to 30 days and have a minimum recording cycle of 0.25 seconds. They are also effective for current condition surveys. By installing the iOS-compatible app on an iPad or iPhone, you can easily check the data. 【Features】 - Automatic measurement by sensors makes pressure fluctuation values and water level fluctuation values immediately clear. - Capable of continuous recording for up to 30 days and minimum recording cycles of 0.25 seconds. - Effective for current condition surveys and more. - Wireless data collection and transfer, making editing and management on a PC easy. *For more details, please contact us.

• Measurement and analysis equipment leasing and rental

The "MONMOS NET05AX2" is a three-dimensional measurement system that supports industrial measurement and monitoring with ultra-high precision sensors. It does not require known points and allows for free configuration of the coordinate system. Anyone can easily perform ultra-precise measurements. By using an optional data collector, remote operation is also possible. 【Features】 ■ Ultra-high precision distance and angle measurement system ■ Automatic aiming accuracy of 1" (when using a reflective prism) ■ Remote operation via PC online is possible ■ Scan search function *For more details, please contact us.

• Measurement and analysis equipment leasing and rental

The "AT-A100" is an air purifier that removes over 90% of TVOC in a single pass. With PACT technology, it decomposes and modifies odor components to effectively eliminate unpleasant smells and dust. It is easy to move thanks to its rollers, making it ideal for odor control in medical facilities and factories. 【Features】 ■ Removes over 90% of TVOC in a single house ■ Energy-saving with human and dust sensors ■ Easy to move with roller design ■ User-friendly size and operability *For more details, please contact us.

• Measurement and analysis equipment leasing and rental