アメリカン電機 List of Products and Services

The "Waterproof Flange Inlet" is a reverse type wiring device that is ideal for power supply ports of portable equipment, charging devices, and generators where you want to eliminate power cables. By using a cord connector body on the power supply side and inserting it into the flange inlet installed on the equipment or wall, electricity is supplied. It is waterproof when the cover (lid) is fully closed. It complies with IP44 standards based on JIS C0920 (protection rating for electrical machinery enclosures). 【Features】 ■ Receives power supply ■ Waterproof when the cover (lid) is fully closed ■ IP44 compliant *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The "Waterproof Flange Inlet (Dustproof and Splashproof Type)" is a device for receiving power, designed to be installed on outdoor mobile equipment and charging devices, where there is a desire to eliminate power cables. It becomes waterproof when combined with a flat cover or a waterproof round cover. It is an IP65 compliant product that is protected against dust and splashes from all directions, both during use and when not in use. 【Features】 ■ Installed on devices where power cables are to be eliminated, receiving power ■ Waterproof specification when combined with a flat cover or a waterproof round cover ■ IP65 compliant product based on JIS C0920, both during use and when not in use *For more details, please refer to the PDF materials or feel free to contact us.

• Lighting outlet equipment

This is a direct-connection type high-capacity (high current) device designed to be installed on outdoor mobile equipment, charging devices, generators, etc., to receive power by connecting to a power supply cable connector body. By using a 60A waterproof cable connector body on the power supply side, it achieves a high protection rating of IP65 for dust and water resistance during use. When not in use, covering it with the included cover maintains the same IP65 dust and water resistance specifications.

• Wiring devices

We offer a high-spec "OA Tap" that supports daisy chaining and is compatible with VCT 3.5mm² wiring. The materials used for the case and built-in outlets are nylon resin, which excels in heat resistance, oil resistance, chemical resistance, abrasion resistance, and tracking resistance, and is UL certified for flame retardancy (UL94 V-0). Additionally, all terminal connections for the wiring are located on the back of the outlet, making it easy to perform wiring work. 【Features】 ■ Versatile design that allows daisy chaining ■ Made of flame-retardant nylon resin with excellent heat resistance and tracking resistance, UL94 V-0 certified ■ Common wire strip length across all types ■ Combinations of five different plug shapes ■ Option to select power plugs *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

American Electric Co., Ltd. manufactures custom OA taps. In addition to standard products of multi-use OA taps, we can accommodate custom orders starting from just one unit, provided the conditions are met. Please feel free to contact us. 【Selection Guide】 ■ Choose a model - Select a tap type that matches the number of outlets ■ Choose an outlet shape - Select the combination of built-in outlet units ■ Choose a plug and wire - Choose whether to include a wire or not - If included, select the wire length and plug shape ■ Decide on the quantity and request a quote *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Tower Tap" is an OA tap with a grounded type 2P 15A 125V. The outlets are arranged vertically on both sides. It features a stable base that prevents tipping, making it a "vertical type" with multiple outlets. In crowded wiring situations often seen in offices, such as tangled power and information cables, the outlet positions can be easily identified at a glance without being obscured. 【Features】 ■ Outlets arranged vertically on both sides ■ Stable base to prevent tipping ■ Usable up to a total of 15A ■ Easy to identify power positions at a glance ■ Reduces the intrusion of dust and other foreign objects into the outlets *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Paratap" is a grounded type 2P 15A 125V OA tap that has been compactly arranged in a "parallel configuration" instead of a series configuration to accommodate multiple input ports. It can be used up to a total of 15A. We also offer products with "noise filter/surge protection features." 【Features】 ■ Compact ■ Grounded type 2P 15A 125V ■ Usable up to a total of 15A ■ Available in 8-port and 12-port options ■ Products with "noise filter/surge protection features" are also available *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

It is suitable for use with servers and UPS systems that have power plugs compliant with NEMA standards 5-20/6-15/6-20. 【Features】 ■ Compatible with various types of wires, including cab tire cables of 1.25 to 3.5 mm² and VVF of 1.6 to 2.0 mm. ■ The materials used for the case and built-in outlets are nylon resin with UL-certified flame-retardant specifications (UL94 V-0). ■ Compliant with NEMA 5-20/NEMA 6-15/NEMA 6ALT-20, making it ideal for use as a power source for computer peripherals. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Access Tap" is an OA tap that allows for daisy chaining and is designed to accommodate VCT 5.5mm² wiring. It features four outlets on the side, making it suitable for use in environments such as free access floors where reliable connections are required. It has a rated capacity of 2P 15A with a total usage of up to 15A. 【Features】 ■ Versatile design that allows for daisy chaining ■ Secures various types of wiring, including VCT 5.5mm² ■ Made of environmentally friendly nylon resin ■ Two types of outlet shapes ■ Supports two connection methods *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "OA Joint Tap" is an outlet with connection capabilities that allows for easy modification and expansion even after the power environment has been laid out. It uses flame-retardant grade UL94 V-0 nylon resin for the main body and case material. With the adoption of an L-shaped hook, it can be placed flat with the insertion port facing up, or positioned on its side to prevent dust intrusion. 【Features】 ■ Outlet with connection capabilities for easy modification and expansion ■ Main body and case material made of flame-retardant grade UL94 V-0 nylon resin ■ Rated for grounded type 2P 15A, usable up to a total of 15A ■ Can be mounted in two directions *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Universal OA Tap" is a standard magnetic OA tap series available in configurations from 2 to 8 outlets, designed for grounded 2P 15A 125V. The standard type includes an LED for power confirmation, while the type with lightning surge protection features an LED that indicates the operation of the function. 【Features】 ■ Grounded 2P 15A 125V ■ Available in 2, 4, 6, and 8 outlets ■ Standard type includes an LED for power confirmation ■ Type with lightning surge protection includes an LED to confirm the operation of the function *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product is an OA tap with a grounding type 2P 15A 125V and 6 outlets, equipped with a 15A circuit breaker with overload protection or a 15A leakage breaker (sensitivity current 15mA). It can instantly detect and cut off the current during overload, short circuit, or leakage, thereby preventing damage to connected devices and strongly supporting the establishment of a safe power environment. 【Features】 ■ Circuit Breaker - Cuts off the current when overload or short circuit causes overcurrent. ■ Leakage Breaker - Cuts off the current not only during overload or short circuit but also when leakage occurs. - Rated sensitivity current (indicating the sensitivity to leakage) is 15mA. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product is an OA tap that allows you to turn peripheral devices on and off collectively in conjunction with the power switch operation of the computer main unit. It contributes to energy savings by improving efficiency and preventing forgetting to turn off devices. It can be used with a grounded 2P 15A 125V, up to a total of 1500W. 【Features】 ■ Operates in conjunction with the power switch of the computer main unit ■ Allows collective on/off control of peripheral devices ■ Contributes to energy savings by improving efficiency and preventing forgetfulness ■ Can be used with a grounded 2P 15A 125V, up to a total of 1500W *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product is a 30A rated OA tap type multi-socket that can connect 5.5mm² and 8mm² wires and is suitable for fixed use. It demonstrates its power in various environments, including machinery and peripheral equipment rated for 30A, as well as in sudden power installations associated with the introduction of UPS (Uninterruptible Power Supply) and PDU (Power Distribution Unit). Additionally, by adopting an L-shaped hook, it allows for normal fixed installation with the socket facing upwards, as well as side mounting to prevent dust intrusion. NEMA standard compliant products such as NEMA L5-30 and NEMA L6-30 are also available in the lineup. 【Features】 ■ Can be fixed in two directions ■ Case made of nylon resin with excellent flame resistance, durability, and impact resistance ■ Usable up to a total of 30A ■ Demonstrates power in various environments ■ Suitable for powering our company's socket bars *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product is a 20A multi-tap (OA tap) that can connect 3.5mm² and 5.5mm² wires and allows for daisy chaining. The case is made of nylon resin, which is excellent in flame resistance (UL94 V-0 grade), durability, and impact resistance. It demonstrates its effectiveness in various environments, such as machinery and peripheral equipment rated for 20A, including three-phase 200V systems, as well as sudden power installations associated with UPS (uninterruptible power supply) and PDU (power distribution unit) setups. NEMA standard compliant products such as NEMA L5-20 and NEMA L6-20 are also available in the lineup. It can be used for a total of up to 20A. 【Features】 ■ Can connect 3.5mm² and 5.5mm² wires ■ Daisy chaining possible ■ Case made of nylon resin with excellent flame resistance, durability, and impact resistance ■ Usable for a total of up to 20A ■ Effective in various environments such as machinery and peripheral devices rated for 20A, and temporary power supplies at exhibition venues *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This is a one-gang outlet box rated for 30A, capable of connecting 8mm² and 14mm² wires. It supports an increase in wire conductor size to reduce power loss. It performs effectively in various environments, including machinery and peripheral equipment rated for 30A, as well as in the installation of sudden power sources due to the introduction of UPS (Uninterruptible Power Supply) and PDU (Power Distribution Unit). NEMA standard compliant products such as NEMA L5-30 and NEMA L6-30 are also available in the lineup. 【Features】 - Capable of connecting 8mm² and 14mm² wires - Rated for 30A - Supports an increase in wire conductor size - Suitable for use with our outlet bars for power supply *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce our "Adapters/Magnets" that we handle. The "Adapter" converts the shape of the insertion port of already installed devices. Our adapter series offers a wide variety of 15A 125V options, allowing you to choose according to your needs. The "Magnet" can be attached to OA taps and other devices for temporary fixation to steel desks and similar surfaces. 【Lineup】 <Adapters> ■KD0011 ■KD0030 ■K6002 <Magnets> ■Z0204 ■Z0206 ■Z0353 *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product is a socket cap designed to prevent the intrusion of dust, metal shavings, etc., into unused sockets and to prevent unauthorized electricity theft, serving as a safety and security measure. We offer a variety of shapes to fit 15A, 20A, and 30A sockets. The hook-type models "Z0209, Z0213, Z0215, Z0216, Z0217" come with a label that says "Do Not Use," allowing one product to accommodate both labeled and unlabeled situations. 【Features】 ■ Prevents the intrusion of dust, metal shavings, etc., into unused sockets and unauthorized electricity theft ■ Offers a variety of shapes to fit different socket types ■ Made from polypropylene resin *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We would like to introduce our "power cables." The "power cable" features highly flexible vinyl cab tire cables. With a high allowable current rating and excellent heat resistance, it is well-suited for use in power supply and extension wiring for OA taps. 【Features】 ■ Highly flexible vinyl cab tire cable ■ Well-suited for use in power supply and extension wiring for OA taps *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product can be connected to a 38mm² power trunk line within factory facilities and can downsize to a 14mm² wire through a 60A output outlet to supply electricity to various devices. The outer shell is made of polycarbonate, a super high-strength resin that boasts strength comparable to that used in riot police shields. Additionally, the material for the inlet is nylon resin, which excels in heat resistance and tracking resistance. Furthermore, the terminal block also uses nylon resin containing filler (glass fiber) to enhance strength and improve performance. Both resins are flame retardant grade UL94 V-0. 【Features】 ■ Structure allows for 100A rated wire feeding ■ Equipped with a 60A outlet of the plug-in type ■ Pursues durability and safety with flame retardant grade UL94 V-0 resin ■ Includes wire band for plug fixation and dust cover ■ Wide range of wire movement ■ Downsizing *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Mobile Branch Box (Leakage Breaker)" is a steel-made branch outlet box that can supply two 30A power sources with a 60A input and is portable. By connecting it to a T-type branch connector body on a 100A main line, two 30A outlets can be used directly. By installing a 30A leakage breaker at each outlet, it protects connected equipment from overcurrent due to overload or short circuits, as well as leakage. 【Features】 ■ Input is rated for grounded type 3P 60A 250V/480V ■ Flexible settings for cable type, length, and plug type ■ Each outlet can be used up to 30A, with a total of 60A for two outlets ■ Rubber feet on the bottom prevent damage to the installation surface ■ Equipped with a metal handle for easy transport during installation or relocation *For more details, please refer to the PDF document or feel free to contact us.

• Emergency power outlet equipment

The "Mobile Junction Box / Junction Box" is a mobile junction box with a rubber cover type that can be relocated, and a sturdy steel plate junction box with screw holes for fixing. It has a structure that can accommodate sudden power expansions on-site. The rubber cover type receives power using a connector body from the inlet at the bottom of the main unit. The steel plate type connects wires by opening the cover and passing the wires through the conduit. 【Features】 ■ Structure that can accommodate sudden power expansions on-site ■ Relocatable with a rubber cover type (Mobile Junction Box) ■ Sturdy steel plate type with screw holes for fixing (Junction Box) *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The "NEMA L6-20" is a robust junction box made of steel plate, designed to accommodate power expansion on-site. By connecting a 30A (NEMA L6-30) plug-type connector body to the waterproof flange inlet on the side of the main unit, electrical supply can be provided to this junction box. It is equipped with a 30A rated ground fault circuit interrupter (GFCI) that cuts off the current in case of overload, short circuit, or leakage. 【Features】 ■ Robust outer casing made of steel plate ■ 20A output with four receptacles on both sides ■ Capable of supplying electricity to the junction box ■ Equipped with a 30A rated ground fault circuit interrupter ■ Provides waterproof performance with protection rating IP44 when all covers on the receptacles and breaker section are closed *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product features a cover made of chloroprene rubber and is a durable branch connector body. It has a current rating of 15A and is a grounded type with 2 poles. It comes with a terminal block for sending connections that can accommodate 3.5mm² and 5.5mm² wires. 【Features】 ■ Cover made of chloroprene rubber ■ Excellent durability ■ Comes with a terminal block for sending connections that can accommodate 3.5mm² and 5.5mm² wires *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The "floor outlet" is a device that can be placed above or below the floor and has a duplex receptacle that allows for daisy chaining. The electrical connection uses a screwless terminal method for copper solid wires (VVF 1.6φ, 2.0φ), enabling smooth wiring work. VCT cables can also be connected using rod-shaped crimp terminals. It has a permissible current of 20A, allowing for daisy chaining. 【Features】 ■ Can be placed above or below the floor ■ Has a duplex receptacle ■ Enables smooth wiring work ■ VCT cables can be connected using rod-shaped crimp terminals ■ Has a permissible current of 20A, allowing for daisy chaining *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The "Waterproof Portable Distribution Box" is a waterproof, relocatable distribution box made of steel plate. By connecting a 30A rated cord connector body to the waterproof flange inlet on the side, it can supply power to a 15A locking type outlet or a 20A plug type outlet. Each circuit is protected by a circuit protector or a ground fault circuit interrupter. It is waterproof when the cover is fully closed and is equivalent to IP44 based on JIS C0920 (protection levels for the enclosures of electrical machinery and equipment). 【Features】 ■ Structure capable of accommodating sudden power expansions on site ■ Suitable for emergency power supply ■ Also suitable for outdoor use ■ Waterproof and relocatable, made of steel plate ■ Waterproof when the cover is fully closed (equivalent to IP44) *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The "Concent Bar" is a compact-sized power strip designed to supply power to IT and office equipment, which can be mounted on a 19-inch rack. It features four outlets compliant with IEC standards 60320/C-13 or C-19, as well as options with a 15A safety breaker equipped with instantaneous interruption functionality for short circuit protection at the outlets, labeled as "Branch Type (for distribution) Breaker." Additionally, we also offer a "Branch Type (for distribution)" that can supply 15A of power. 【Features】 ■ IEC C-13 / IEC C-19 - Compact and suitable for 200V servers ■ Branch Type (for distribution) Breaker - Allows flexible configuration of cable types, lengths, and plug shapes ■ Branch Type (for distribution) - Each outlet can handle up to 15A, with a total of 30A for two outlets *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The "1U Outlet Bar" is a multi-outlet power strip that can supply 15A and 20A power using a 30A input plug, and comes with a bracket that can be mounted in a 19-inch rack with a 1U size. The outlets include 15A locking type, NEMA L6-15, NEMA L6-20, IEC C-13, and IEC C-19. Each outlet is equipped with a circuit protector that detects overcurrent and cuts off the current. Additionally, there is a 10-outlet power strip with a 15A input locking type available. The rack mounting bracket can be attached to the outlet bar body in five different configurations, allowing for various power setups in horizontal or vertical orientations, as well as on the back or side. All types comply with the Electrical Appliance and Material Safety Law (PSE), making them suitable for use in Japan. An optional bracket is available for installing the unit 40mm inside the rack, allowing the use of plugs into the main outlet while the front cover of the rack is closed. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "NEMA L6-20" is a power strip that can be mounted in a 1U size of a 19-inch rack. It has four outlets, each equipped with a 20A rated safety breaker. Since the breaker handle does not protrude from the surface, it will not accidentally turn OFF even if touched. 【Features】 ■ Can be mounted in a 1U size of a 19-inch rack ■ Equipped with a 20A rated safety breaker for each outlet ■ UL/CSA certification obtained ■ Complies with the Electrical Appliance and Material Safety Law (PSE) ■ Strongly supports the unification of product specifications for domestic and overseas markets *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

A new 200V model of the "1U power strip" with a 30A input that can be mounted in a 19-inch rack with a 1U size has been released, featuring a NEMA L6-30 input plug and four IEC C-19 outlets. Each outlet can be used up to 20A, with a total maximum of 30A for all four outlets combined. It complies with the Electrical Appliance and Material Safety Law (PSE), ensuring safe use within Japan. 【Features】 ○ Each outlet is equipped with a 20A rated circuit protector that detects overcurrent and cuts off the current. ○ Installation holes for a code clamp (sold separately) to prevent IEC C-20 plugs from falling out are provided next to each outlet. ○ Bracket that allows for three-way mounting. ○ RoHS2 compliant product. For more details, please contact us or download the catalog.

• Wiring devices

This product is a compact 1U power strip that can be installed in a 19-inch rack with minimal space. It complies with the Electrical Appliance and Material Safety Law (PSE), making it suitable for use in Japan. It comes with a bracket that allows the housing to be installed approximately 40mm inside the frame rack, enabling the front cover of the rack to be closed even when a plug is inserted into the power strip's outlet. 【Features】 - Can be installed in a 19-inch rack with minimal space - Comes with a bracket that allows the housing to be installed approximately 40mm inside the frame rack - The front cover of the rack can be closed even when a plug is inserted into the power strip's outlet - Complies with the Electrical Appliance and Material Safety Law (PSE) - Suitable for use in Japan *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The 0U type multi-outlet power strip with IEC C-13 and IEC C-19 connectors, which can be mounted vertically in a 19-inch rack and has a 20A or 30A input, has been renewed. The 30A input type now features a new 20A circuit protector that splits the power circuit into two branches, capable of detecting overloads and cutting off current in case of overcurrent. Unlike the previous breaker-equipped models, this product has no protrusions, improving the ease of installation and the handling of server equipment. Additionally, all products comply with the Electrical Appliance and Material Safety Law (PSE). 【Features】 ■ Can be mounted vertically in a 19-inch rack ■ Improved ease of installation and handling of server equipment ■ Reduces the hassle and cost of securing plugs using cable clamps ■ Compliant with the Electrical Appliance and Material Safety Law (PSE) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "0U Power Strip (Red and Blue Models)" is a product that can be mounted vertically in a 19-inch rack. It is a 0U type power strip with multiple IEC C-13 outlets, available with 20A or 30A input. The included plugs are also color-matched to the power strip body, making it even easier to identify the power system. It complies with the Electrical Appliance and Material Safety Law (PSE), allowing for use within Japan. 【Features】 ■ Can be mounted vertically in a 19-inch rack ■ Included plugs are color-matched to the power strip body ■ Easier identification of the power system ■ Complies with the Electrical Appliance and Material Safety Law (PSE) ■ Usable within Japan *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Concent Bar (Branch Type)" is a branch outlet bar that can supply a 15A power source using a 30A (NEMA L5-30) input plug. It can be used up to 15A per outlet, with a total of 30A for two outlets combined. Each outlet is equipped with a 15A-rated circuit protector that can detect overcurrent and cut off the current. 【Features】 ■ Can supply a 15A power source using a 30A (NEMA L5-30) input plug ■ Usable up to 15A per outlet, with a total of 30A for two outlets combined ■ Each outlet is equipped with a circuit protector that can detect overcurrent and cut off the current ■ Equipped with a 15A-rated circuit protector ■ Can be mounted not only vertically in a 19-inch rack but also in a 1U size using optional mounting brackets (model number: HKC-SPT1U) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Power Strip with Breaker (Branch Use)" can supply power of 15A with a breaker using a 2P 30A 125V grounded input. It can be mounted not only vertically in a 19-inch rack but also in a 1U size using a separately sold mounting bracket (model number: HKC-SPT1U). Additionally, various settings can be configured to match the environment within the rack, including the shape of the input plug and the type and length of the cable. 【Features】 ■ Can supply 15A power with a breaker using a 2P 30A 125V grounded input ■ Various settings possible to match the environment within the rack, including the shape of the input plug and the type and length of the cable ■ Up to 15A can be used per outlet, with a total of 30A for two outlets ■ Each outlet is equipped with a 15A safety breaker *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce brackets that allow you to change the installation position when installing various power strips in a 19-inch rack. We offer the 1U power strip 40mm bracket "HKC-SPT40" and "HKC-SPT40B," which allow the power strip's outlet to be installed 40mm inside the rack, as well as the sturdy metal L-shaped bracket "HA-SPTL" for 0U power strips. 【Features】 ■ 40mm bracket for 1U power strips - Allows the use of plugs into the 1U power strip outlet while the front cover of the rack is closed. ■ L-shaped bracket for 0U power strips - Enables vertical installation against the rack's panel mount frame when installing a 0U power strip in a 19-inch rack. - Sturdy metal L-shape. *For more details, please refer to the PDF document or feel free to contact us.

• bracket

We would like to introduce optional parts that can be applied to various power strips for more convenient and safe use. We offer a "bracket" that allows you to install a 1U power strip 40mm inside a 19-inch rack, as well as "cable clamps," "cable sets," and "rack mounting screw sets." 【Lineup】 ■ Bracket ■ Cable Clamp ■ Cable Set ■ Rack Mounting Screw Set *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The Z0220 is a cord clamp designed to prevent accidental disconnection when inserting IEC C-14 or IEC C-20 plugs into the receptacles of a power strip. A new reusable snap type has been introduced that allows for removal by pinching the base even after installation. By using two levers, it is possible to adjust the position according to the length and thickness of the plug. It can be used with the IEC C-19 receptacles of HKC2910PT, HKC2920PT, and 0U power strips. 【Features】 ■ Prevents accidental disconnection when inserting IEC C-14 or IEC C-20 plugs into the receptacles of a power strip. ■ Reusable snap type allows for removal by pinching the base even after installation. ■ Position adjustment is possible according to the length and thickness of the plug. ■ Usable with the IEC C-19 receptacles of HKC2910PT, HKC2920PT, and 0U power strips. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

Introducing the "Embedded Outlet Plate." This product features a plate surface with PULL ⇔ LOCK and NUKER ⇔ LOCK indicators, available in both "Hook Type and Lock Type" and "Flat Blade Type" that can accommodate various embedded outlets. 【Features】 ■ Hook Type and Lock Type - The plate surface has PULL ⇔ LOCK and NUKER ⇔ LOCK indicators. ■ Flat Blade Type - Compatible with various embedded outlets. *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The "Blank Plate" is a plate used to cover boxes from which devices have been removed or unnecessary holes in walls. There is a wide variety available, allowing you to choose materials and styles according to your intended use and environment. (Each plate comes with screws, except for the rubber packing.) 【Features】 ■ Covers boxes from which devices have been removed or unnecessary holes in walls ■ Wide variety available ■ Choose materials and styles according to your intended use and environment ■ Each plate comes with screws, except for the rubber packing *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

The "Waterproof Lift Cover Plate" is a cover-equipped outlet plate designed for L-shaped plugs rated at 15A, 20A, and 30A, as well as flat blade plugs rated at 30A, 50A, and 60A, providing waterproof performance compliant with IPX3 when the cover is fully closed. It is also possible to install a 15A rated flat blade embedded outlet, allowing the use of swing plugs or plugs with a smaller diameter, as well as thin and flexible wires. Unlike downward-facing rainproof outlets, the insertion point faces forward, making it easy to plug and unplug the power plug. The cover can be opened and closed even when the plug is inserted into the outlet. The material used is high-strength polycarbonate that contains no harmful substances and is flame-retardant (UL94V-2 or higher). Additionally, it features a simple locking mechanism that makes it difficult for the cover to open even when subjected to vibrations. A padlock can be used to secure the cover to the main body, preventing unintended opening and closing. 【Features】 ■ RoHS2 compliant ■ The cover is transparent, allowing for confirmation of the plug connection status even when closed ■ Strong installation is possible with four-point fastening to the knockout hole *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Lighting outlet equipment

The "WLP5000" is a dedicated plate for recessed outlets of flat blade type 30A, 50A, and 60A. The cover is made of clear molded material, allowing for confirmation of the connection of L-shaped plugs even when closed. The body and cover are made from polycarbonate, an ultra-high-strength resin known for its exceptional durability, which is even used in riot police shields. When the power is not used for an extended period, a rubber blank piece that seals the cable opening can prevent dust and other intrusions. It also comes with a set of labels, such as voltage indicators, that can be affixed according to usage conditions. 【Features】 - Suitable for using L-shaped plugs that can run along the wall. - Waterproof performance with protection grade IPX3 (rainproof) when the cover is fully closed. - The cover can be opened and closed while the L-shaped plug remains inserted in the outlet. - The opening and closing cover can be held in the fully open position (120°). - There is a simple locking function that prevents the cover from opening due to unexpected vibrations or impacts when fully closed. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Dustproof and Waterproof Sealock Plate" is a cover-opening type plate that adopts a "locking mechanism" with excellent airtight performance, making it difficult to open even under significant impact or vibration. Depending on the installation method, it can achieve IP65 (dustproof and splash-proof) specifications when the cover is fully closed. It can be selected according to the specifications and environment of the embedded outlet you will be using. 【Features】 ■ By using the mounting holes for dustproof and splash-proof at the four corners and securing it with screws, it has waterproof and dustproof functions with IP65 (dustproof and splash-proof) protection against dust and splashes from all directions when the cover is fully closed. ■ By using the locking hook located at the tip of the cover, the cover can be locked to the main body when closed. ■ The cover can be held in the fully open position (180°) during use. ■ The plate body and cover are made of flame-retardant nylon resin with excellent heat resistance and tracking resistance, compliant with UL94 V-0. ■ RoHS2 compliant product. *For more details, please request documentation or view the PDF data available for download.

• Wiring devices

The "Waterproof Panel Lift Cover" is a cover with a hinged plate that can be attached to panel outlets. To maintain waterproof performance, a soft resin packing is used on the bottom surface of the plate. It is waterproof when the cover is fully closed. It complies with IP44 standards based on JIS C0920 (protection levels for electrical machinery enclosures). 【Features】 ■ Provides IP44 waterproof performance based on JIS C0920 when fully closed ■ The hinged cover can be fixed in the open position (80°) for plug use and fully open position (160°) ■ Includes a simple locking function to prevent opening due to vibrations or impacts when fully closed ■ Uses soft resin packing on the bottom surface of the plate to maintain waterproof performance *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

This plate allows for IP65 (dustproof and splash-proof) waterproof and dustproof performance in the power supply area by covering the plug with a separately sold waterproof round cover when in use, and with the included flat cover when not in use. (It functions as a waterproof and dustproof outlet.) Due to its high sealing capability and durability, it is suitable not only for outdoor use exposed to wind and rain but also for indoor use in places such as kitchens and food manufacturing factories (food factories), food processing workplaces (processing plants), as well as pharmaceutical manufacturing plants (pharmaceutical factories) and clean rooms that do not allow any dust, where cleaning of floors and equipment may cause water splashes. It is an IP65 compliant product that is protected against dust and water jets from all directions, both when in use and when not in use. 【Features】 - Provides dustproof and splash-proof performance both when the outlet is in use and when not in use. - High sealing capability and durability. - Capable of installing high-capacity power supplies (15A to 60A) regardless of indoor or outdoor use. - IP65 compliant product. *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment