三甲 List of Products and Services

This is the "Palette D4-1111-6N (OBP)" blended with 5% OBP (Ocean Bound Plastic). OBP (Ocean Bound Plastic) refers to plastic waste that is highly likely to flow into the ocean, which has been discarded on land within 50 km of the coastline. We are engaged in activities to collect this waste before it flows into the ocean and upcycle it into logistics equipment. Additionally, through the development and sale of OBP (Ocean Bound Plastic) pallets, we are participating in the "Plastic Smart" initiative promoted by the Ministry of the Environment. *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Sanko Talu #1-3" is a round container of the tupperware type that covers the main body with a lid. When the lid is closed, the protrusions on the inside of the lid securely engage with the opening of the main body, so there is no worry about the lid unexpectedly coming off. Additionally, since the lid is of the tupperware type, it can be reused multiple times. *Please note that it is not completely airtight, so there is a possibility of liquid leakage during transport if the contents are watery. <Other Features> - By using a soft material for the lid, it requires little force to open and close, making it easy to use for repetitive tasks such as closing the lid. - When displaying or storing, stable stacking is possible through the lid. 【Specifications (partial)】 ■External dimensions: φ146×86 (set) mm ■Internal dimensions: φ134×75 (set) mm ■Lid external dimensions: φ146×7 mm ■Capacity: 1.0l ■Material: PE ■Color: Body / Cream, Lid / Milky White *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

The "Milk Box YMS-6" is a delivery-specific cooler box with high insulation performance that can store six 180 mL milk bottles and three cooling packs. It can maintain a product temperature of below 10°C for over 11 hours at an ambient temperature of 37°C. <Other Features> - The lid does not protrude significantly beyond the back of the main body when opened, allowing for placement against walls. - The lid can stand upright when open, making it easy to access the contents. - A slide lock is installed in a position that is not visible from the front of the lid. This enhances security by allowing the lid to be easily locked while maintaining insulation performance. - A padlock can also be attached to the lid. - To prevent the cooler box from being blown away by the wind, weights can be placed between the main body and the insulation material (optional). - If the lid fades due to aging, it can be removed and replaced. 【Specifications (Partial)】 ■External Dimensions: 314×238×227mm ■Internal Dimensions: 225×145×160mm ■Effective Internal Dimensions: 220×140×160mm ■Delivery Time: 3 days ■Shipping Unit: 8 *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Sun Shop Cargo 14L" is an in-store basket featuring a distinctive mesh design. In particular, the mesh on the longer sides evokes the image of a tower (such as the Eiffel Tower) when the handles are raised. Its compact size adds to its uniqueness. The handle holes and handles of the main body are designed to minimize pressure on the hands when gripped, providing excellent handling. 【Specifications】 ■ External dimensions: 396×256×224mm ■ Capacity: 14.2l ■ Material: PP ■ Shipping unit: 20 ■ Delivery time: Please consult us ■ Nesting height: 30mm ■ Color: White *For more details, please refer to the PDF document or feel free to contact us.

• Shopping Cart

The "Bottle Crate YM-20" is a partitioned crate that can hold 20 small 100mL bottles (φ56) arranged in 4×5 rows. It features a textured surface for label removal located at the bottom center of the short side and at the corners. Additionally, a handle is installed at the top center of the short side, enhancing its handling capability. 【Specifications (partial)】 ■ External dimensions: 335×272×114mm ■ Internal dimensions: 306×246×103mm ■ Effective internal dimensions: 58×58×95 (1 compartment) mm ■ Material: PP ■ Shipping unit: 10 *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies

The "Egg Tray 30G" is a tray for transporting eggs that can hold 30 eggs. Due to its excellent bending strength, it minimizes contact between eggs during automatic line transport, preventing breakage. Since its flat dimensions are the same as the existing "Egg Tray," the same transport systems can be utilized. *Note that the height is greater, so the storage capacity differs. When storing 10 pieces of the "Egg Tray 30G" in the SN Container C#50, it can transport 240 eggs. Please feel free to consult us when you need assistance. 【Specifications】 ■ External dimensions: 296×296×54mm ■ Material: PP ■ Shipping unit: 100 ■ Delivery time: 3 days ■ Egg storage capacity: 30 eggs ■ Compatible products: Santenner B#45, B#45-2, B#45-3, SN Container C#41, C#50 *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Bobbin 445" is a bobbin with an outer diameter of φ445 mm, used for winding wires and electrical cables. <Features> - It is an integrated molding type with no gaps at the base, preventing wire from getting caught. - The hole for the winding machine's shaft is elongated, making it compatible with many winding machine manufacturers. (Compatible with shaft diameters of φ20 mm or less, within a range of 80-100 mm from the center. *Please confirm with the actual product.) - Two diagonal starting holes (5×15 mm) are installed on the body of the bobbin, making it easy to start winding the wire. 【Specifications】 ■Outer dimensions: φ445×243 mm ■Inner dimensions: φ300×193 mm ■Material: Recycled ABS ■Shipping unit: 3 ■Delivery time: 3 days ■Color: Black *For more details, please refer to the PDF document or feel free to contact us.

• Wire

The "Display Oricon 6422" is a foldable container used as a product display stand. It is a type that is 60mm taller than the existing Display Oricon 6416 and can be interlocked, allowing for expanded display effects when used in combination. <Features> - The sides have minimal protrusions and no holes other than the handles. This design makes it difficult for vegetable scraps and dust to accumulate, making it easy to clean and maintaining the display effect. - The inner surface has a shape designed to minimize contact between the contents (such as fruits and vegetables) and the ribs, reducing the likelihood of damage during temporary transport compared to conventional display Oricons. - The special axis shape allows the long side panels to gradually open even when folded backward, making it less likely for the long side panels to catch on the display Oricon below when lifted. 【Specifications (partial)】 ■External dimensions: 600×400×220(55)mm ■Internal dimensions: 570×370×208mm ■Effective internal dimensions: 570×370×198mm ■Capacity: 41.8L ■Material: PP ■Colors: Brown, Black *For more details, please refer to the PDF document or feel free to contact us.

• container

■The weight is 1/7 of a cage cart, significantly reducing the workload. The weight has been reduced from approximately 37kg to 5.4kg, making it about 1/7 of the original, greatly alleviating the burden of movement. Being lightweight, it is also easy to stack for storage, taking up little space. There is no hassle of assembly or folding like with cage carts. ■Since it is a platform cart, it can be used safely without a specific direction. There is no opening due to the absence of a frame like that of a cage cart, allowing for use without a specific direction. When setting up in sorting work areas, it can be done without worrying about direction, improving efficiency. Furthermore, without a frame, it does not obstruct loading containers or replenishing products, enabling work to be done safely and smoothly. ■Safe and secure bundling with a special hook and dedicated belt. The special hook installed on the 'Sun Carry 7456V' allows for bundling work to be done by one person, saving on labor costs. The tip of the hook has a guiding shape, making it easy to thread the belt and difficult to slip out. ■A pocket for storing a fixed belt is installed in the center of the deck surface. (300×217×depth 50mm) This eliminates the hassle of separate management and prevents loss.

• Trolley

The "Sambox 26-2C" is a product that has increased the height of the existing Sambox #26-2B by 36mm. It is compatible with Sambox #26-2, allowing you to choose according to your contents. 【Specifications (partial)】 ■ External dimensions: 518×436×116mm ■ Internal dimensions: 478×396×108mm ■ Effective internal dimensions: 472×389×100mm ■ Capacity: 20.1L ■ Material: PP ■ Colors: Blue, Gray *For more details, please refer to the PDF document or feel free to contact us.

• container

The "SN Container C#37ZT" is a type of SN container that is perfectly suited for loading onto the bed of a light truck, featuring the same color and shape. Its external dimensions are the same size as the Santenna B#50 series, allowing for similar use in light trucks. (※ Calculated based on light truck bed size: 1945×1410mm.) It is compatible with the Santenna B#50 series, which is widely used by many fresh produce producers. <Other Features> - With the SN design, it is more compact compared to the Santenna B#50 series, allowing for efficient storage. - Additionally, when loading empty boxes onto the truck, nesting reduces the height (approximately 27% reduction), enabling safe transportation. - It features a folded handle design. Unlike handle holes, this prevents contact between hands and contents, protecting the contents from damage. - The interior surface of the container has large chamfers and rounded shapes, making it difficult for fruits and vegetables to get marks or scratches, thus minimizing quality degradation during storage and transport. - It can be stacked in a sliding manner along the short and long sides, making stacking operations easy. *For more details, please refer to the PDF document or feel free to contact us.

• container

The "SN Container C#19CH" is a type of SN container that perfectly accommodates 12 units of 1L paper packs (gable top packs) arranged in 3×4 columns, with the same color and shape. It demonstrates high return efficiency due to its SN design. <Features> - The corners of the inner bottom surface are designed to be recessed, preventing the corners of the paper packs from being crushed and maintaining quality. - It allows for slide stacking in both the long and short edge directions, making manual loading and unloading easy. - To prevent collapse due to the legs sinking during stacking, claws are installed on the legs and rails on the flanges. - The legs are designed with drainage holes and a tapered shape, preventing water accumulation and enhancing washability. - A rib for label peeling and a textured surface are provided below the short side handles. - The handles are curved to fit the fingers, making them easy to grip and enhancing handling performance. 【Specifications (partial)】 ■External dimensions: 361×272×277mm ■Internal dimensions: 318×242×261mm ■Effective internal dimensions: 302×226×251mm ■Capacity: 18.9L *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Oricon EP58B" is a collapsible container designed for KD logistics that can perfectly accommodate 4 units in a 2x2 arrangement on a 911-sized pallet. - It fits with the dedicated "Oricon EP58B Lid." - When banding in the folded state, a special shape that supports the areas where the band contacts helps prevent deformation of the lid, and combined with the cutouts for the band, ensures safe handling. - The interior has a flat shape, making it difficult for contents to get caught, and it excels in cleanability. - Label peel-off lines are installed on the top surface of the lid and the long side bottom plate to prevent adhesive residue from labels. 【Specifications (partial)】 ■ External dimensions: 541×441×304(92)mm ■ Internal dimensions: 497×397×294mm ■ Effective internal dimensions: 497×397×286mm ■ Capacity: 58.0L ■ Material: PP/conductive PP ■ Color: Blue/Black *For more details, please refer to the PDF document or feel free to contact us.

• Storage Container

The "Oricon P63B" is a folding container equipped with a short-side re-fitting mechanism. It has a folded section for finger placement at both ends of the bottom of the short side, allowing for easy re-fitting from the outside if the engagement of the short side panels shifts or comes loose. Even if the engagement of the lower Oricon becomes disengaged while stacked, it can be re-fitted from the outside, eliminating the need to disassemble the stack and helping to prevent load collapse. <Other Features> - The external dimensions of the Oricon are 600×400mm, allowing for 4 units on an 812-sized pallet and 5 units on a 1012-sized pallet (100% loading efficiency). - It features easy-to-handle grip holes for excellent handling. - The printed surface on the side and the label-peeling resistant textured surface on the upper short side are designed to prevent adhesive residue from labels, ensuring cleanliness. 【Specifications (partial)】 ■ External dimensions: 600×400×319(74)mm ■ Internal dimensions: 569×368×309mm ■ Effective internal dimensions: 568×367×301mm ■ Capacity: 64.3L ■ Material: PP ■ Color: Blue *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Palette R4-1012-9" is a pallet suitable for both vertical and horizontal support types, designed for use in freezers and refrigerators. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■External dimensions: 1005×1205×130mm ■Color ■Weight: 17.0kg ■Material: PE ■Shipping unit: 2 ■Delivery time: 3 days ■Model: Four-way entry double-sided use type *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Palette LX-1010D2" is a pallet designed for stacking 18L cans (one-gallon cans: 238×238×349mm) perfectly in a 4×4 arrangement on a flat surface. Non-slip tape is placed according to the stacking positions of the one-gallon cans, ensuring that all cans stacked in a 4×4 arrangement come into contact with the non-slip tape. The non-slip tape is arranged to contact the outer sides of the one-gallon cans, causing the cans to tilt slightly inward, which prevents shifting or falling during transport due to vibrations. If you need assistance, please feel free to consult with us. 【Specifications (partial)】 ■ External dimensions: 1000×1000×132mm ■ Color: Blue ■ Weight: 23.1kg (LX-1010R2) / 20.6kg (LX-1010D2) ■ Material: PP ■ Shipping unit: 2 ■ Delivery time: 3 days ■ Model: Two-way entry double-sided use type (LX-1010R2) / Two-way entry single-sided use type (LX-1010D2) *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Plamo Module 10B" is a box pallet with a door opening specification for the short side (frame) of the "Plamo Module 10." Similar to the "Plamo Module 10," the short side (frame) can be removed, but it is ideal for workspaces where there is no space to place the removed short side (frame) or for light stacking tasks that do not require removing the short side (frame). The opening line when the door is opened is straight, making it difficult for contents to get caught during stacking operations. 【Features】 ■ Short side door included ■ Full opening possible ■ Label/card holder installation surface available *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Home Oricon S50M" is a 50L size container from Home Oricon, designed as a collapsible container with an inward-folding type. - It is a lightweight type of Oricon in a ball container size, compatible with the "Home Oricon S30M" which has different heights. - The short side panel handles are semi-circular, and the long side panel handles are arch-shaped, making them easy to grip and carry. - The lock release lever allows for easy folding operations. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■ Model number: 562060 ■ External dimensions: 523×365×305mm ■ Internal dimensions: 487×330×292mm ■ Effective internal dimensions: 485×329×286mm ■ Compressive load: 9.02kN (920kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Banjū M-3" is a deep type from the Banjū M series. - It has excellent bottom surface strength. - The bottom surface is designed with a raised center to prevent it from bending and coming into contact with the contents of the lower stacked layer. - To improve washability, the base of the bottom ribs has a large R shape. - Label peeling ribs are installed on both short sides. - A printing area of 398×100 is provided on the long side. Please feel free to consult us when placing an order. 【Specifications (partial)】 ■Model number: 202473 ■External dimensions: 572×388×138mm ■Internal dimensions: 535×348×127mm ■Effective internal dimensions: 531×344×118mm ■Compression load: 24.15kN (2462kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Santenna B#29T" is a stacking type container for natto fermentation and aging. <Features> - It can store 7×4 rows of 96mm natto packs in two tiers. - Ventilation is ensured with side cutouts and a full mesh design. - The mesh on the sides is positioned to avoid the flange position of the packs, preventing packs from popping out and direct airflow from entering through gaps. - A wave-shaped, easy-to-hold handle is installed at the central flange area of the short side. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■Model number: 102957 ■External dimensions: 707×464×117mm ■Internal dimensions: 672×423×103mm ■Effective internal dimensions: 670×417×95mm ■Compression load: 26.0kN (2650kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Sambox #22-5 Middle Divider L, S" is a middle divider for the "Sambox #22-5." <Features> - It can divide the box into 2, 3, 4, 6, 8, 9, or 12 sections. - The transparent middle divider provides excellent visibility of the contents. - It fits into the grooves on the bottom surface of the box, preventing shifting within the box. - Even if the main body of the box is raised at the bottom, the height is designed to ensure that the middle divider does not protrude from the flange. Please feel free to consult us when you need assistance. <Specifications> ■Model Number: 804159 (L), 804160 (S) ■External Dimensions: 383×239×7mm (L), 261×239×6mm (S) ■Color: Transparent *The color is a reference sample and may differ from the actual product. ■Material: Special Resin ■Shipping Unit: 50 *Additional shipping charges will apply for orders below the displayed quantity. ■Compatible Product: Sambox #22-5 *For more details, please refer to the PDF document or feel free to contact us.

• Storage

Until now, there has been no lid with a Sunlock for the Sambox #36-3 series. We have now added a lid equipped with the Sunlock Type 13 to our lineup. The Sunlock Type 13 is rotary and offers good operability, ensuring that the lid does not come off due to wind or vibrations. Since the lock does not protrude from the outer dimensions of the lid when locked, it is less likely to be damaged by collisions with adjacent containers. Additionally, there is no risk of the lock getting caught, which improves usability during tasks such as pallet stacking. <Other Features> - A notch for banding is provided in the center of the short side (this notch is flush with the top surface of the lid). - The lid can be stacked on its own. *It is also available for sale without a lock. (Part number: 701856-00) Please feel free to contact us if you have any inquiries. 【Specifications】 ■Part Number: 701856-01 ■External Dimensions: 559×375×29mm ■Lock: Sunlock Type 13 L/R *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Sambox #14G" has a total of 34 heat dissipation holes (φ8) on its four sides, making it suitable for storing items that retain heat. The holes allow heat to escape, helping to prevent condensation. <Other Features> - Exceptional bottom strength, suitable for storing heavy items. - Bag-shaped handles are installed on both short sides, providing excellent handling. 【Specifications (Partial)】 ■Model Number: 201486 ■External Dimensions: 475×369×118mm ■Internal Dimensions: 421×321×108mm ■Effective Internal Dimensions: 412×313×98mm ■Card Holder Installation: Both short sides for 12-M type, 12-S type, 13-S type, 69 type, 85 type *For more details, please refer to the PDF document or feel free to contact us.

• palette

<Features> - Approximately 9% weight reduction from SN Container C#29FC This will reduce CO2 emissions by about 1 ton annually with the same operation as before. (Note: This figure is based on our calculation method and does not guarantee results.) Please feel free to consult us when you need assistance. 【Specifications (Partial)】 ■Model Number: 102958 ■External Dimensions: 559×452×151mm ■Internal Dimensions: 513×406×143mm ■Effective Internal Dimensions: 498×391×134mm ■Compression Load: 12.75kN (1300kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The SN Container C#10YA is a stacking type container of the same color suitable for transporting food such as bento and side dishes. <Features> - It is a shallow type of "SN Container C#18" with a height of 63mm. It can be interlocked with each other. - All sides have holes, allowing visibility of the contents even when two rows of stacked containers are loaded. - The bag-shaped handles on the long and short sides enable stable handling. - There is a textured surface for label removal on both short sides, the entire top surface of the flange, and part of the inner surface. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■Model number: 101004 ■External dimensions: 528×314×89mm ■Internal dimensions: 478×276×80mm ■Effective internal dimensions: 457×260×70mm ■Compression load: 13.23kN (1350kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The Sankuretto Oricon 96B-B is a lid-equipped Oricon compatible with Auto Traveler. <Features Compatible with Auto Traveler> ● Flat outer surface of short side panels The flat outer shape allows for automatic label application by the Auto Traveler. ● Textured surface installation on short side panels A highly label-release textured surface is installed on the flat side of the short panels to minimize dirt caused by label adhesive residue. <Other Features> - Easy-to-handle fold-over handles - Lid: Equipped with a slide lock. - The lid can be sealed with an Insulock. - The lid can be sealed with a Sun Fastener Type 3 (optional). *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Oricon M Series" is a new series from Oricon. <Features of the M Series> ● The arched handle fits comfortably in your hand The arched shape provides an easy-to-handle grip that fits your hand. Unlike handles with holes, there is no worry about foreign substances entering through the holes or contents spilling out. ● Dust accumulation is minimized The sides feature a simple design with few ribs, making it difficult for dust to accumulate and easy to clean. ● Labels are easy to remove The sides have easy-to-remove textured surfaces for labels on all four edges and two short edges of the top frame. <Product Lineup> ■ Oricon M30B ■ Oricon M39B ■ Oricon M50B ■ Oricon M60B ■ Suncret Oricon M30B ■ Suncret Oricon M39B ■ Suncret Oricon M50B ■ Suncret Oricon M60B *For more details, please refer to the PDF document or feel free to contact us.

• container

The "TL Plastic Shelf 9045-S" is a plastic shelf with a shelf spacing of 171mm. By adopting a special ultra-reinforced polypropylene, it has successfully achieved a thinner shelf while maintaining strength, resulting in a stylish plastic shelf like never before. This is a product with a different shelf spacing from the existing product "TL Plastic Shelf 9045." You can choose a shelf size that suits your needs. (Since the shelf boards are common, combinations are also possible.) ● TL Plastic Shelf 9045 Shelf spacing: 401mm ● TL Plastic Shelf 9045-S Shelf spacing: 171mm Assembly requires no tools and can be easily set up by simply inserting each part. Additionally, the leg parts are locked to the shelf board, so they won't come off even when lifted. They can also be easily removed. Being lightweight, it places less burden on installation and movement, allowing for flexible layout options. When storing, the leg parts can be stored on the underside of the shelf board, eliminating the need for separate management and allowing for compact storage. The storage of the leg parts can also be easily done with one hand. *For more details, please refer to the PDF materials or feel free to contact us.

• Shelves and racks

This is a top frame in size 1114, reinforced with tough light technology, offering exceptional rigidity. Made from specially ultra-reinforced PP, it achieves about four times the strength compared to conventional products. Its excellent rigidity enables stable transportation, maintaining the quality of the loaded items. Other features: - It has drainage holes (φ6~φ8) that allow for drainage from one side during cleaning. - The shape is designed to minimize shifting during stacking. - It includes cut-out shapes for banding on both the long and short sides. Please feel free to consult with us when you need assistance. *For more details, please refer to the related links or feel free to contact us.*

• Box Pallet

The "Palette LX-1114R2-5" is a mesh-type pallet suitable for air release when stacking bulk bags on pallets. Due to the mesh on the underside, air trapped inside the bulk bags can easily escape, allowing for stable stacking. The surface is designed to be flat to prevent dirt from adhering to the bottom of the bulk bags. Please feel free to contact us for inquiries. 【Specifications】 ■External dimensions: 1400×1100×150mm ■Color: Blue ■Weight: 32.2kg ■Shipping unit: 2 ■Model: Two-way entry, double-sided use type *For more details, please refer to the related links or feel free to contact us.

• Box Pallet

The "TL Compalletter F#830B" is a reinforced bottom type of the "TL Compalletter F#830." <Features> - Exceptional bottom strength Compared to the "TL Compalletter F#830," the bottom deflection strength has increased by 1.6 times. - Casters are directly attached to the bottom No processing of the main body is required when installing the casters! By purchasing only the components, customers can easily attach the casters themselves. 【TL Compalletter Series】 ● High strength: Exceeds the strength of metal products ● Lightweight: Approximately 20% lighter than metal while maintaining high rigidity. The reduction in weight helps to lower CO2 emissions during transport. ● Hygienic: No rust formation, maintaining the quality of the contents. ● Space-saving: Each part folds inward, eliminating the need for extra space. ● Scratch prevention: Made entirely of plastic, making it less likely to scratch floors and preserving aesthetics. ● Stable stacking: Stacking strength is twice that of metal. Safe and stable stacking is possible. ● User-friendly: Doors that can be partially opened are installed on both long sides, making it easy to load and unload contents. *For more details, please refer to the PDF document or feel free to contact us.

• palette

This is a container commonly referred to as "Fune," used for mixing wall materials and concrete. It combines quality, strength, and ease of use. Currently, we offer a lineup of six sizes. ● Lineup and Specifications 'Tough Fune 25' External dimensions: 630×370×140mm Effective internal dimensions: 630×370×140mm Capacity: 23.6ℓ 'Tough Fune 40' External dimensions: 616×467×185mm Effective internal dimensions: 630×370×140mm Capacity: 35.2ℓ 'Tough Fune 60' External dimensions: 862×521×206mm Effective internal dimensions: 630×370×140mm Capacity: 67.7ℓ 'Tough Fune 80' External dimensions: 924×616×210mm Effective internal dimensions: 630×370×140mm Capacity: 85.0ℓ 'Tough Fune 140' External dimensions: 1232×766×207mm Effective internal dimensions: 630×370×140mm Capacity: 136ℓ 'Tough Fune 200' External dimensions: 1364×902×207mm Effective internal dimensions: 630×370×140mm Capacity: 188.0ℓ *For more details, please contact us.

• Work tools

This is the mesh container "Santainer" with a handle. By folding the handle inward, you can stack it while keeping the contents stored. If you fold the handle outward and stack it (nesting), it can be stored compactly. Made of hygienic plastic, it is suitable for washing and storing food. ● Lineup "Santainer A#50N" - Standard lineup of 6 colors 【Specifications】 External dimensions: 578×390×283mm Effective internal dimensions: 479×295×249mm Standard colors: Light Blue, Yellow, Red, Green, Pink, Cream "Santainer A#85-2" - Standard lineup of 6 colors 【Specifications】 External dimensions: 720×475×338mm Effective internal dimensions: 614×375×292mm Standard colors: Light Blue, Yellow, Red, Green, Pink, Cream "Santainer A#120-2" - Standard lineup of 3 colors 【Specifications】 External dimensions: 808×553×370mm Effective internal dimensions: 692×447×302mm Standard colors: Light Blue, Yellow, Orange *For color variations, please refer to the separate PDF brochure.

• container

We have developed a number of groundbreaking logistics equipment that turns our customers' requests into reality. We are actively advancing product development to meet the specifications and demands unique to increasingly diverse and complex industries. 【Featured New Products】 ● 'TL Palette S2-1012' with a wide insertion opening unique to Toughlight Pallets The wide 398mm insertion opening allows for smooth use of forks and hand lifts. ● 'Oricon EP43A' for 15kg apples with an inward-tilting design The storage guideline set at the entrance enhances the efficiency of apple harvesting while maintaining quality! 【List of New Products (Excerpt)】 ● Strong against load breakage! Lightweight model for film transport 'Palette D4-712' ● Flat inner surface shape that minimizes damage to contents 'Oricon P30B-S' ● Half-height size of the flat C-50B 'Flat O-27B' ● Perfectly stackable for 1111 size pallets! 'Oricon EP34B' ● 1111 size flat surface divided into two 'SN Container B#94' ● Equipped with a mechanism to prevent card lifting 'SN Container C#30M' For more details, please refer to the brochure!

• container

The "Protector 755" is equipment for suspended storage and transportation of film roll products. When transporting a palletized Protector with film rolls installed, diagonal reinforcing ribs are installed from the tubular section at the points where the bands pass through to prevent deformation and damage to the Protector due to band binding with the pallet. This design reduces the likelihood of deformation and damage, ensuring a long lifespan for repeated use. Appearance defects such as whitening and deformation are also less noticeable. *It is suitable for use in combination with pallet LX-077140R4. RFID installation is possible at the corners diagonally. RFID facilitates loss prevention and product management, enabling increased efficiency. Other features: - Anti-slip mounting mechanisms are installed at two locations on both the pallet contact area and the top. - Stable stacking is possible by aligning the stacking mechanisms of the Protectors. - The tubular section has a petal shape, making it easy to wrap protective films inside the support tubes. - Two mounting mechanisms for Velcro fasteners are installed on each side to reduce friction on the side contact surfaces. - Holes for connecting with binding bands during stacking and side-by-side arrangements are installed (a total of 8 locations). *For more details, please refer to the related links or feel free to contact us.

• palette

The stacking recess is a rectangular groove shape designed to fit the casters. By aligning the casters parallel to the groove for stacking, the movement of the casters is suppressed, resulting in excellent stability during stacking. A connecting rod is installed on one short side, allowing for easy connection between carriers. This is expected to improve work efficiency during transport and reduce the number of personnel required. Six anti-slip pads are installed on the deck surface to reduce the sliding of the loaded items. Handle holes are provided on all four sides of the deck surface, making it easier to carry. The casters are designed to be boltless, meaning they do not require bolts, nuts, or similar fasteners for fixation. This allows for easy replacement of casters without tools in case of damage, and prevents the loss of bolts and nuts, thus avoiding foreign object contamination. The casters used are φ100×4 swivel urethane wheels, with a load capacity of 200kg. 【Specifications (excerpt)】 ■External dimensions: 680×450×160mm ■Loading area: 680×450mm ■Weight: 4.1kg ■Load capacity: 200kg *For more details, please refer to the related links or feel free to contact us.

• Trolley

The "Medium Bento Box with Flat Window" is a product that excels in visibility of its contents due to its flat window. With no surface irregularities, the contents are clearly visible, allowing for careful handling of fragile items like cakes, thus maintaining quality. Additionally, the area around the transparent window is protected by a rigid resin, preventing damage and enhancing durability while also preventing foreign matter contamination. 【Specifications (Excerpt)】 ■ External dimensions: 492×342×25mm ■ Shipping unit: 20 ■ Color: Cream / Transparent ■ Material: PP ■ Compatible product: Medium Bento Box *For more details, please refer to the related links or feel free to contact us.

• container

The "Medium-sized Banju K" can be efficiently loaded onto a 1012 size pallet. Pallet surface loading capacity: 10 units (brick stacking) With no vertical ribs on the sides and a simple shape, it excels in washability. Additionally, the diagonal grid ribs on the bottom have a wide pitch and a low height, enhancing washability. The textured surface on the short side makes it easy to peel off labels. It prevents adhesive residue and can be used cleanly. 【Specifications (excerpt)】 ■ External dimensions: 400×300×85mm ■ Internal dimensions: 367×277×80mm ■ Effective internal dimensions: 360×270×70mm ■ Capacity: 7.9L ■ Color: Cream ■ Shipping unit: 20 ■ Material: PP *For more details, please refer to the related links or feel free to contact us.

• container

It is possible to install a hanging card holder on the short sides. The card holder is designed to prevent the main body from curling up, which helps avoid snagging on the lower container during nesting. This prevents damage to the card holder and improves nesting usability. A textured surface for label removal is installed on part of both short and long sides. This prevents adhesive residue from labels and allows for clean usage. The handles on the short sides are arched. This increases the grip area for fingers, improving handling during use. 【Specifications (excerpt)】 ■External dimensions: 550×366×206mm ■Internal dimensions: 500×325×195mm ■Effective internal dimensions: 484×309×187mm ■Capacity: 30.4L ■Color: Orange/Yellow ■Shipping unit: 5 ■Material: PP *For more details, please refer to the related links or feel free to contact us.

• container

The external dimensions are 1095×540mm, allowing for two units to be perfectly stacked on a 1100×1100 size pallet. This enables efficient transportation without wasting space. Thanks to the rail structure installed at the long side opening, stacking can be done while sliding, improving work efficiency during stacking. Additionally, in multi-tier storage, the fit is difficult to disengage (hard to misalign), making it less likely to collapse. A hanging card holder can be installed on one of the short sides. The card holder is designed to be held at the bottom with a claw shape. Therefore, there is no concern about it getting caught and flipping up on the lower container during nesting, enhancing work efficiency. There are a total of five φ6mm drainage holes located at the center of the bottom and at all four corners. 【Specifications (excerpt)】 ■ External dimensions: 1095×540×201mm ■ Internal dimensions: 1045×484×194mm ■ Effective internal dimensions: 1019×458×184mm ■ Capacity: 94.1L ■ Color: A Gray/Pink *For more details, please refer to the related links or feel free to contact us.

• container

The "Partition Plate Set for Oricon EP210B-B" is a dedicated partition plate for the "Oricon EP210B-B." It can be divided into 2 or 3 sections vertically. Depending on the orientation (front or back) of the partition plate, it can be used for either 2-way or 3-way division. It is composed of a twin cone (5mm) on the plate surface and frame parts, making it lightweight and easy to handle. 【Specifications】 ■ Size: 1006×553×9mm ■ Color: Orange/White ■ Compatible product: Oricon EP210B-B ■ Notes: Uses single cone mm *For more details, please refer to the related links or feel free to contact us.

• container

The "Oricon Rack EP89B (without short side door)" is an Oricon rack with a large opening on the side. During picking and restocking operations, products can be taken in and out from the side while the Oricon is stacked (eliminating the need for loading and unloading the Oricon). Side opening dimensions: 245×420mm Additionally, the "flap" installed at the front provides various features. - Increased strength at the front The flap helps to prevent deformation of the long sides and overall twisting, making it easier to perform slide stacking (the process of sliding the upper container over the opening of the lower container during stacking), which enhances stacking efficiency. - Locking during assembly The flap also serves as a lock during assembly. By folding down the flap, it locks, and by raising the flap, it releases the lock. The short side has a self-supporting mechanism, so simply raising the flap (releasing the lock) will not cause it to fall over, allowing for the contents to be removed from above while the flap is raised. *For more details, please refer to the related links or feel free to contact us.

• Storage Container

The "Oricon EP89B" is an Oricon with various features due to the "flap" installed at the opening. - Increased strength of the opening The flap helps to suppress deformation of the long sides and overall twisting, making the sliding stack (the process of stacking containers by sliding the upper container over the opening of the lower container) during stacking easier, thus enhancing stacking workability. - Locking during assembly The flap also serves as a lock during assembly. By folding down the flap, it locks, and by raising the flap, it enters an unlocked state. The short sides have a self-supporting mechanism, so simply raising the flap (unlocking) will not cause it to fall over, allowing you to remove contents from above while the flap is raised. *For more details, please refer to the related links or feel free to contact us.

• Storage Container

The "TL Palette S2-1012" is a pallet that features a wide insertion opening unique to tough light pallets. The wide insertion opening of 398mm allows for smooth use of forks and hand lifts. Made from specially reinforced PP, it boasts excellent rigidity and, despite being a single-sided pallet, it has minimal load cracking during lifting, enabling stable transportation. *Preventive measures against load collapse are recommended. Furthermore, due to the wide insertion opening, the fork width of the forklift can be expanded, helping to suppress load cracking (a wide-type hand lift is recommended). • Load Capacity Static Load: 2000kg Dynamic Load: 1000kg 【Specifications (excerpt)】 ■ External Dimensions: 1000×1200×130mm ■ Weight: 24.0kg ■ Color: A Gray ■ Shipping Unit: 2 *For more details, please refer to the related links or feel free to contact us.

• palette

The "Palette D4-113117" is an export pallet that excels in loading efficiency for 40ft shipping containers. With a high transportation efficiency of 93.8%, it reduces transportation costs. It is a pallet designed for overseas one-way use with a size of 10 modules. It can be used with a hand lift. It features anti-slip grooves for securing loads with PP bands and other materials (a total of 8 locations on the outer side of the insertion points). The 5mm recess helps prevent significant shifting of the bands during transport and reduces wear from contact with adjacent pallets. • Load Capacity Static Load: 4000kg Dynamic Load: 1000kg *When measures against load collapse are in place. 【Specifications (excerpt)】 ■ External Dimensions: 1130×1170×120mm ■ Weight: 8.9kg ■ Color: Black ■ Shipping Unit: 2 *For more details, please refer to the related links or feel free to contact us.

• palette